From: Dolev Raviv <draviv@codeaurora.org>
To: James.Bottomley@HansenPartnership.com, hch@infradead.org
Cc: linux-scsi@vger.kernel.org, linux-scsi-owner@vger.kernel.org,
linux-arm-msm@vger.kernel.org, santoshsy@gmail.com,
Dolev Raviv <draviv@codeaurora.org>
Subject: [PATCH/RESEND V6 00/18] UFS: Power management support
Date: Thu, 25 Sep 2014 15:32:18 +0300 [thread overview]
Message-ID: <1411648356-3883-1-git-send-email-draviv@codeaurora.org> (raw)
This patch seies introduces support for power management in the driver as well as vendor specific initialization - registers, clocks, voltage regulators etc.
It includes also a rework for the init sequence and other PM pre-requisite such as write protection support, handling well-known LUN, error handling (retries), bkops, START_STOP unit command, and ICC levels settings.
--
Changes from V5:
- Add a print to "[01/18] scsi: fixing the "type" for well known LUs"
indicating on the type change.
- Moved "sdev->is_visible" test to scsi_sysfs_add_devices
- Reverted the squashed between
"[10/17] scsi: ufs: introduce well known logical unit in ufs" and
"[09/17] scsi: ufs: manually add well known logical"
and addressed othe comments by Chris.
- Fixed a bug and comments reported by Akinobu Mita <akinobu.mita@gmail.com>
Changes from V4:
- Restored "[01/16] scsi: support well known logical units" to fix type issue"
and renamed "[01/17] scsi: fixing the "type" for well known LUs"
- Add "[02/17] scsi: sysfs: don't add scsi_device if its already added"
to help addressing Chris comments.
- Squashed "[10/17] scsi: ufs: introduce well known logical unit in ufs" and
"[09/17] scsi: ufs: manually add well known logical" and addressed most of
Chris comments here.
- Cleanup in "[11/16] scsi: ufs: add UFS power management support" to align
it with comments made on previous patches.
Changes from V3:
- Replaced "[01/16] scsi: support well known logical units" with
"[09/17] scsi: ufs: manually add well known logical
- add patch "[PATCH V4 05/17] scsi: ufs: add voting support for host"
- Fix couple of compilation issues introduced in V3
- Add a NULL pointer test to hba->vops before accessing it
- Changed disable/enable irq with request/free irq
Changes from V2:
- Reordered scsi core patches
- add patch "[PATCH V3 02/16] scsi: balance out autopm get/put calls in"
- Minor changes/fixes to the patches:
* "[PATCH V3 10/16] scsi: ufs: add UFS power management support"
* "[PATCH V3 12/16] scsi: ufs: Add support for clock gating"
* "[PATCH V3 16/16] scsi: ufs: definitions for phy interface"
In order to address community concerns, and as a result of further
development and testing.
Changes from V1:
- 6 new patches apended at the end
- Allow overriding power configuration with controller support and
preferences/capabilities <Dolev Raviv>
- Allow overriding power choice with controller capabilities <Dolev Raviv>
- Add support for clock gating and clock scaling <Sahitya Tummala>
- Add capability to control the auto bkops during suspend <Subhash Jadavani>
- Add misc changes for phy/unipro driver usage <Dolev Raviv>
Dolev Raviv (2):
scsi: ufs: refactor configuring power mode
scsi: ufs: definitions for phy interface
Raviv Shvili (1):
scsi: ufs: add voting support for host controller power
Sahitya Tummala (3):
scsi: ufs: Add support for clock gating
scsi: ufs: Add freq-table-hz property for UFS device
scsi: ufs: Add support for clock scaling using devfreq framework
Subhash Jadavani (7):
scsi: fixing the "type" for well known LUs
scsi: sysfs: don't add scsi_device if its already added
scsi: ufs: refactor query descriptor API support
scsi: ufs: manually add well known logical units
scsi: ufs: introduce well known logical unit in ufs
scsi: ufs: add UFS power management support
scsi: ufs: tune bkops while power managment events
Sujit Reddy Thumma (4):
scsi: ufs: Allow vendor specific initialization
scsi: ufs: Add regulator enable support
scsi: ufs: Add clock initialization support
scsi: ufs: improve init sequence
Yaniv Gardi (1):
scsi: ufs: Active Power Mode - configuring bActiveICCLevel
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 41 +
drivers/scsi/scsi_scan.c | 16 +
drivers/scsi/ufs/Kconfig | 2 +
drivers/scsi/ufs/ufs.h | 132 +-
drivers/scsi/ufs/ufshcd-pci.c | 55 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 291 ++-
drivers/scsi/ufs/ufshcd.c | 2592 ++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 280 ++-
drivers/scsi/ufs/ufshci.h | 9 +-
drivers/scsi/ufs/unipro.h | 56 +
include/scsi/scsi.h | 1 +
11 files changed, 3150 insertions(+), 325 deletions(-)
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2014-09-25 12:32 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 12:32 Dolev Raviv [this message]
2014-09-25 12:32 ` [PATCH V6 01/18] scsi: fixing the "type" for well known LUs Dolev Raviv
2014-09-26 8:13 ` Christoph Hellwig
2014-10-03 18:40 ` Elliott, Robert (Server Storage)
2014-09-25 12:32 ` [PATCH V6 02/18] scsi: sysfs: don't add scsi_device if its already added Dolev Raviv
2014-09-26 8:14 ` Christoph Hellwig
2014-09-26 13:41 ` Hannes Reinecke
2014-09-30 21:54 ` Martin K. Petersen
2014-09-25 12:32 ` [PATCH/RESEND V6 03/18] scsi: ufs: Allow vendor specific initialization Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 04/18] scsi: ufs: Add regulator enable support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 05/18] scsi: ufs: Add clock initialization support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 06/18] scsi: ufs: add voting support for host controller power Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 07/18] scsi: ufs: refactor query descriptor API support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 08/18] scsi: ufs: improve init sequence Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 09/18] scsi: ufs: Active Power Mode - configuring bActiveICCLevel Dolev Raviv
2014-09-25 12:32 ` [PATCH V6 10/18] scsi: ufs: manually add well known logical units Dolev Raviv
2014-10-03 16:16 ` Akinobu Mita
2014-10-03 16:35 ` Subhash Jadavani
2014-10-03 16:35 ` Christoph Hellwig
2014-10-05 7:31 ` Akinobu Mita
2014-09-25 12:32 ` [PATCH V6 11/18] scsi: ufs: introduce well known logical unit in ufs Dolev Raviv
2014-09-25 12:32 ` [PATCH V6 12/18] scsi: ufs: add UFS power management support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 13/18] scsi: ufs: refactor configuring power mode Dolev Raviv
2014-10-03 16:20 ` Akinobu Mita
2014-10-03 16:42 ` Subhash Jadavani
2014-09-25 12:32 ` [PATCH/RESEND V6 14/18] scsi: ufs: Add support for clock gating Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 15/18] scsi: ufs: Add freq-table-hz property for UFS device Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 16/18] scsi: ufs: Add support for clock scaling using devfreq framework Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 17/18] scsi: ufs: tune bkops while power managment events Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 18/18] scsi: ufs: definitions for phy interface Dolev Raviv
2014-09-25 15:43 ` [PATCH/RESEND V6 00/18] UFS: Power management support David Miller
2014-09-30 14:26 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411648356-3883-1-git-send-email-draviv@codeaurora.org \
--to=draviv@codeaurora.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=hch@infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-scsi-owner@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=santoshsy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.