From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, ath9k-devel@qca.qualcomm.com
Subject: [PATCH 3/6] ath9k: Fix sequence number assignment
Date: Mon, 6 Oct 2014 11:19:36 +0530 [thread overview]
Message-ID: <1412574579-22532-4-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1412574579-22532-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Currently, ath9k uses a global counter for all
frames that need to be assigned a sequence number.
QoS-data frames are handled properly since they
have a per-tid counter. But, beacons and other
management frames use the same counter even if
multiple interfaces or contexts are present.
Fix this issue by making the counter per-interface
and using it when mac80211 sets IEEE80211_TX_CTL_ASSIGN_SEQ.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 4 +++-
drivers/net/wireless/ath/ath9k/beacon.c | 12 ++----------
drivers/net/wireless/ath/ath9k/xmit.c | 34 ++++++++++++++++++++++-----------
3 files changed, 28 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bfa0b15..01a7db0 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -294,7 +294,6 @@ struct ath_tx_control {
* (axq_qnum).
*/
struct ath_tx {
- u16 seq_no;
u32 txqsetup;
spinlock_t txbuflock;
struct list_head txbuf;
@@ -563,6 +562,7 @@ int ath_tx_init(struct ath_softc *sc, int nbufs);
int ath_txq_update(struct ath_softc *sc, int qnum,
struct ath9k_tx_queue_info *q);
void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop);
+void ath_assign_seq(struct ath_common *common, struct sk_buff *skb);
int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath_tx_control *txctl);
void ath_tx_cabq(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -592,6 +592,8 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
struct ath_vif {
struct list_head list;
+ u16 seq_no;
+
/* BSS info */
u8 bssid[ETH_ALEN];
u16 aid;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index a6af855..ecb783b 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -144,16 +144,8 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw,
mgmt_hdr->u.beacon.timestamp = avp->tsf_adjust;
info = IEEE80211_SKB_CB(skb);
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- /*
- * TODO: make sure the seq# gets assigned properly (vs. other
- * TX frames)
- */
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- sc->tx.seq_no += 0x10;
- hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
- }
+
+ ath_assign_seq(common, skb);
if (vif->p2p)
ath9k_beacon_add_noa(sc, avp, skb);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 151ae49..493a183 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2139,6 +2139,28 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
return bf;
}
+void ath_assign_seq(struct ath_common *common, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_vif *vif = info->control.vif;
+ struct ath_vif *avp;
+
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
+ return;
+
+ if (!vif)
+ return;
+
+ avp = (struct ath_vif *)vif->drv_priv;
+
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ avp->seq_no += 0x10;
+
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
+}
+
static int ath_tx_prepare(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath_tx_control *txctl)
{
@@ -2162,17 +2184,7 @@ static int ath_tx_prepare(struct ieee80211_hw *hw, struct sk_buff *skb,
if (info->control.hw_key)
frmlen += info->control.hw_key->icv_len;
- /*
- * As a temporary workaround, assign seq# here; this will likely need
- * to be cleaned up to work better with Beacon transmission and virtual
- * BSSes.
- */
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
- sc->tx.seq_no += 0x10;
- hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
- }
+ ath_assign_seq(ath9k_hw_common(sc->sc_ah), skb);
if ((vif && vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_AP_VLAN) ||
--
2.1.2
next prev parent reply other threads:[~2014-10-06 5:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-06 5:49 [PATCH 0/6] ath9k patches Sujith Manoharan
2014-10-06 5:49 ` [PATCH 1/6] ath: Fix smatch warning Sujith Manoharan
2014-10-06 5:49 ` [PATCH 2/6] ath9k: Fix crash in MCC mode Sujith Manoharan
2014-10-06 5:49 ` Sujith Manoharan [this message]
2014-10-06 5:49 ` [PATCH 4/6] ath9k: Use sta_state() callback Sujith Manoharan
2014-10-06 5:49 ` [PATCH 5/6] ath9k: Enable multi-channel properly Sujith Manoharan
2014-10-06 5:49 ` [PATCH 6/6] ath9k: Process beacons properly Sujith Manoharan
2014-10-07 4:36 ` Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412574579-22532-4-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=ath9k-devel@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.