From: js07.lee@gmail.com (Jungseung Lee)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] arm: mm: Refine set_memory_* functions
Date: Tue, 21 Oct 2014 20:00:37 +0900 [thread overview]
Message-ID: <1413889237-6933-2-git-send-email-js07.lee@gmail.com> (raw)
In-Reply-To: <1413889237-6933-1-git-send-email-js07.lee@gmail.com>
set_memory_* functions have same implementation
except memory attribute.
This patch makes to use common function for these, and pull out
the functions into arch/arm/mm/pageattr.c like arm64 did.
It will reduce code size and enhance the readability.
Signed-off-by: Jungseung Lee <js07.lee@gmail.com>
---
arch/arm/mm/Makefile | 2 +-
arch/arm/mm/mmu.c | 38 ---------------------
arch/arm/mm/pageattr.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/mm/pageattr.c
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 91da64d..d3afdf9 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y := dma-mapping.o extable.o fault.o init.o \
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \
- mmap.o pgd.o mmu.o
+ mmap.o pgd.o mmu.o pageattr.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9f98cec..06817e1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -354,44 +354,6 @@ const struct mem_type *get_mem_type(unsigned int type)
}
EXPORT_SYMBOL(get_mem_type);
-#define PTE_SET_FN(_name, pteop) \
-static int pte_set_##_name(pte_t *ptep, pgtable_t token, unsigned long addr, \
- void *data) \
-{ \
- pte_t pte = pteop(*ptep); \
-\
- set_pte_ext(ptep, pte, 0); \
- return 0; \
-} \
-
-#define SET_MEMORY_FN(_name, callback) \
-int set_memory_##_name(unsigned long addr, int numpages) \
-{ \
- unsigned long start = addr; \
- unsigned long size = PAGE_SIZE*numpages; \
- unsigned end = start + size; \
-\
- if (start < MODULES_VADDR || start >= MODULES_END) \
- return -EINVAL;\
-\
- if (end < MODULES_VADDR || end >= MODULES_END) \
- return -EINVAL; \
-\
- apply_to_page_range(&init_mm, start, size, callback, NULL); \
- flush_tlb_kernel_range(start, end); \
- return 0;\
-}
-
-PTE_SET_FN(ro, pte_wrprotect)
-PTE_SET_FN(rw, pte_mkwrite)
-PTE_SET_FN(x, pte_mkexec)
-PTE_SET_FN(nx, pte_mknexec)
-
-SET_MEMORY_FN(ro, pte_set_ro)
-SET_MEMORY_FN(rw, pte_set_rw)
-SET_MEMORY_FN(x, pte_set_x)
-SET_MEMORY_FN(nx, pte_set_nx)
-
/*
* Adjust the PMD section entries according to the CPU in use.
*/
diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c
new file mode 100644
index 0000000..004e35c
--- /dev/null
+++ b/arch/arm/mm/pageattr.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+struct page_change_data {
+ pgprot_t set_mask;
+ pgprot_t clear_mask;
+};
+
+static int change_page_range(pte_t *ptep, pgtable_t token, unsigned long addr,
+ void *data)
+{
+ struct page_change_data *cdata = data;
+ pte_t pte = *ptep;
+
+ pte = clear_pte_bit(pte, cdata->clear_mask);
+ pte = set_pte_bit(pte, cdata->set_mask);
+
+ set_pte_ext(ptep, pte, 0);
+ return 0;
+}
+
+static int change_memory_common(unsigned long addr, int numpages,
+ pgprot_t set_mask, pgprot_t clear_mask)
+{
+ unsigned long start = addr;
+ unsigned long size = PAGE_SIZE*numpages;
+ unsigned long end = start + size;
+ int ret;
+ struct page_change_data data;
+
+ if (!IS_ALIGNED(addr, PAGE_SIZE)) {
+ start &= PAGE_MASK;
+ end = start + size;
+ WARN_ON_ONCE(1);
+ }
+
+ if (!is_module_address(start) || !is_module_address(end - 1))
+ return -EINVAL;
+
+ data.set_mask = set_mask;
+ data.clear_mask = clear_mask;
+
+ ret = apply_to_page_range(&init_mm, start, size, change_page_range,
+ &data);
+
+ flush_tlb_kernel_range(start, end);
+ return ret;
+}
+
+int set_memory_ro(unsigned long addr, int numpages)
+{
+ return change_memory_common(addr, numpages,
+ __pgprot(L_PTE_RDONLY),
+ __pgprot(0));
+}
+
+int set_memory_rw(unsigned long addr, int numpages)
+{
+ return change_memory_common(addr, numpages,
+ __pgprot(0),
+ __pgprot(L_PTE_RDONLY));
+}
+
+int set_memory_nx(unsigned long addr, int numpages)
+{
+ return change_memory_common(addr, numpages,
+ __pgprot(L_PTE_XN),
+ __pgprot(0));
+}
+
+int set_memory_x(unsigned long addr, int numpages)
+{
+ return change_memory_common(addr, numpages,
+ __pgprot(0),
+ __pgprot(L_PTE_XN));
+}
--
1.9.1
prev parent reply other threads:[~2014-10-21 11:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 11:00 [PATCH 1/2] arm: Introduce {set,clear}_pte_bit Jungseung Lee
2014-10-21 11:00 ` Jungseung Lee [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413889237-6933-2-git-send-email-js07.lee@gmail.com \
--to=js07.lee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.