From: Sebastian Reichel <sre@kernel.org>
To: Hans Verkuil <hans.verkuil@cisco.com>, linux-media@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Sebastian Reichel <sre@kernel.org>
Subject: [RFCv2 1/8] [media] si4713: switch to devm regulator API
Date: Tue, 21 Oct 2014 17:07:00 +0200 [thread overview]
Message-ID: <1413904027-16767-2-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1413904027-16767-1-git-send-email-sre@kernel.org>
This switches back to the normal regulator API (but use
managed variant) in preparation for device tree support.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
drivers/media/radio/si4713/si4713.c | 80 ++++++++++++++++++++++++++-----------
drivers/media/radio/si4713/si4713.h | 6 +--
2 files changed, 58 insertions(+), 28 deletions(-)
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
index b576555..b335093 100644
--- a/drivers/media/radio/si4713/si4713.c
+++ b/drivers/media/radio/si4713/si4713.c
@@ -23,6 +23,7 @@
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/slab.h>
@@ -366,13 +367,22 @@ static int si4713_powerup(struct si4713_device *sdev)
if (sdev->power_state)
return 0;
- if (sdev->supplies) {
- err = regulator_bulk_enable(sdev->supplies, sdev->supply_data);
+ if (sdev->vdd) {
+ err = regulator_enable(sdev->vdd);
if (err) {
- v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
+ v4l2_err(&sdev->sd, "Failed to enable vdd: %d\n", err);
return err;
}
}
+
+ if (sdev->vio) {
+ err = regulator_enable(sdev->vio);
+ if (err) {
+ v4l2_err(&sdev->sd, "Failed to enable vio: %d\n", err);
+ return err;
+ }
+ }
+
if (gpio_is_valid(sdev->gpio_reset)) {
udelay(50);
gpio_set_value(sdev->gpio_reset, 1);
@@ -399,11 +409,18 @@ static int si4713_powerup(struct si4713_device *sdev)
}
if (gpio_is_valid(sdev->gpio_reset))
gpio_set_value(sdev->gpio_reset, 0);
- if (sdev->supplies) {
- err = regulator_bulk_disable(sdev->supplies, sdev->supply_data);
+
+
+ if (sdev->vdd) {
+ err = regulator_disable(sdev->vdd);
if (err)
- v4l2_err(&sdev->sd,
- "Failed to disable supplies: %d\n", err);
+ v4l2_err(&sdev->sd, "Failed to disable vdd: %d\n", err);
+ }
+
+ if (sdev->vio) {
+ err = regulator_disable(sdev->vio);
+ if (err)
+ v4l2_err(&sdev->sd, "Failed to disable vio: %d\n", err);
}
return err;
@@ -432,12 +449,21 @@ static int si4713_powerdown(struct si4713_device *sdev)
v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
if (gpio_is_valid(sdev->gpio_reset))
gpio_set_value(sdev->gpio_reset, 0);
- if (sdev->supplies) {
- err = regulator_bulk_disable(sdev->supplies,
- sdev->supply_data);
- if (err)
+
+ if (sdev->vdd) {
+ err = regulator_disable(sdev->vdd);
+ if (err) {
+ v4l2_err(&sdev->sd,
+ "Failed to disable vdd: %d\n", err);
+ }
+ }
+
+ if (sdev->vio) {
+ err = regulator_disable(sdev->vio);
+ if (err) {
v4l2_err(&sdev->sd,
- "Failed to disable supplies: %d\n", err);
+ "Failed to disable vio: %d\n", err);
+ }
}
sdev->power_state = POWER_OFF;
}
@@ -1441,17 +1467,26 @@ static int si4713_probe(struct i2c_client *client,
}
sdev->gpio_reset = pdata->gpio_reset;
gpio_direction_output(sdev->gpio_reset, 0);
- sdev->supplies = pdata->supplies;
}
- for (i = 0; i < sdev->supplies; i++)
- sdev->supply_data[i].supply = pdata->supply_names[i];
+ sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd");
+ if (IS_ERR(sdev->vdd)) {
+ rval = PTR_ERR(sdev->vdd);
+ if (rval == -EPROBE_DEFER)
+ goto exit;
+
+ dev_dbg(&client->dev, "no vdd regulator found: %d\n", rval);
+ sdev->vdd = NULL;
+ }
+
+ sdev->vio = devm_regulator_get_optional(&client->dev, "vio");
+ if (IS_ERR(sdev->vio)) {
+ rval = PTR_ERR(sdev->vio);
+ if (rval == -EPROBE_DEFER)
+ goto exit;
- rval = regulator_bulk_get(&client->dev, sdev->supplies,
- sdev->supply_data);
- if (rval) {
- dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
- goto free_gpio;
+ dev_dbg(&client->dev, "no vio regulator found: %d\n", rval);
+ sdev->vio = NULL;
}
v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
@@ -1559,7 +1594,7 @@ static int si4713_probe(struct i2c_client *client,
client->name, sdev);
if (rval < 0) {
v4l2_err(&sdev->sd, "Could not request IRQ\n");
- goto put_reg;
+ goto free_ctrls;
}
v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
} else {
@@ -1579,8 +1614,6 @@ free_irq:
free_irq(client->irq, sdev);
free_ctrls:
v4l2_ctrl_handler_free(hdl);
-put_reg:
- regulator_bulk_free(sdev->supplies, sdev->supply_data);
free_gpio:
if (gpio_is_valid(sdev->gpio_reset))
gpio_free(sdev->gpio_reset);
@@ -1604,7 +1637,6 @@ static int si4713_remove(struct i2c_client *client)
v4l2_device_unregister_subdev(sd);
v4l2_ctrl_handler_free(sd->ctrl_handler);
- regulator_bulk_free(sdev->supplies, sdev->supply_data);
if (gpio_is_valid(sdev->gpio_reset))
gpio_free(sdev->gpio_reset);
kfree(sdev);
diff --git a/drivers/media/radio/si4713/si4713.h b/drivers/media/radio/si4713/si4713.h
index ed700e3..ed28ed2 100644
--- a/drivers/media/radio/si4713/si4713.h
+++ b/drivers/media/radio/si4713/si4713.h
@@ -190,8 +190,6 @@
#define MIN_ACOMP_THRESHOLD (-40)
#define MAX_ACOMP_GAIN 20
-#define SI4713_NUM_SUPPLIES 2
-
/*
* si4713_device - private data
*/
@@ -236,8 +234,8 @@ struct si4713_device {
struct v4l2_ctrl *tune_ant_cap;
};
struct completion work;
- unsigned supplies;
- struct regulator_bulk_data supply_data[SI4713_NUM_SUPPLIES];
+ struct regulator *vdd;
+ struct regulator *vio;
int gpio_reset;
u32 power_state;
u32 rds_enabled;
--
2.1.1
next prev parent reply other threads:[~2014-10-21 15:07 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 15:06 [RFCv2 0/8] [media] si4713 DT binding Sebastian Reichel
2014-10-21 15:07 ` Sebastian Reichel [this message]
[not found] ` <1413904027-16767-2-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-11 11:07 ` [RFCv2 1/8] [media] si4713: switch to devm regulator API Mauro Carvalho Chehab
2014-11-11 11:07 ` Mauro Carvalho Chehab
2014-11-11 14:33 ` Sebastian Reichel
2014-11-11 17:59 ` Hans Verkuil
[not found] ` <54624E83.1060404-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2014-11-11 22:12 ` Mauro Carvalho Chehab
2014-11-11 22:12 ` Mauro Carvalho Chehab
2014-10-21 15:07 ` [RFCv2 2/8] [media] si4713: switch reset gpio to devm_gpiod API Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 3/8] [media] si4713: use managed memory allocation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 4/8] [media] si4713: use managed irq request Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 5/8] [media] si4713: add device tree support Sebastian Reichel
[not found] ` <1413904027-16767-6-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-04 21:47 ` Sakari Ailus
2014-11-04 21:47 ` Sakari Ailus
2014-11-10 20:58 ` Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 6/8] [media] si4713: add DT binding documentation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 7/8] ARM: OMAP2: RX-51: update si4713 platform data Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 8/8] [media] si4713: cleanup " Sebastian Reichel
2014-11-07 12:49 ` [RFCv2 0/8] [media] si4713 DT binding Hans Verkuil
2014-11-10 11:06 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413904027-16767-2-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hans.verkuil@cisco.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.