Re: [PATCH RESEND 3/3] extcon: max77693: Fix extcon UART on Trats2 board

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On śro, 2014-10-22 at 18:09 +0900, Chanwoo Choi wrote:
> On 10/22/2014 05:45 PM, Krzysztof Kozlowski wrote:
> > When JIG was set to "boot on" mode, the UART connection did not work
> > because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
> > cable.
> > 
> > This was introduced in 39bf369e4ed3 ("extcon: max77693: Add support dock
> > device and buttons") while adding dock features.
> > 
> > Assign the JIG-UART-ON back to UART path.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> I want to change the name of this patch because I don't prefer to use board name on extcon driver patch.
> before - extcon: max77693: Fix extcon UART on Trats2 board
> after - extcon: max77693: Fix cable name of JIG_UART_ON

No problem, thanks!

> 
> Applied it.
> 
> Thanks,
> Chanwoo Choi
> 
> > ---
> >  drivers/extcon/extcon-max77693.c | 12 +++++++-----
> >  1 file changed, 7 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> > index 9d21e75a7032..beaa8cd71c3b 100644
> > --- a/drivers/extcon/extcon-max77693.c
> > +++ b/drivers/extcon/extcon-max77693.c
> > @@ -206,7 +206,7 @@ static const char *max77693_extcon_cable[] = {
> >  	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
> >  	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
> >  	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
> > -	[EXTCON_CABLE_JIG_UART_ON]		= "Dock-Car",
> > +	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
> >  	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
> >  	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
> >  	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
> > @@ -506,9 +506,6 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
> >  		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
> >  		extcon_set_cable_state(info->edev, "MHL", attached);
> >  		goto out;
> > -	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
> > -		strcpy(dock_name, "Dock-Car");
> > -		break;
> >  	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
> >  		strcpy(dock_name, "Dock-Desk");
> >  		break;
> > @@ -643,6 +640,11 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
> >  		strcpy(cable_name, "JIG-UART-OFF");
> >  		path = CONTROL1_SW_UART;
> >  		break;
> > +	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
> > +		/* PATH:AP_UART */
> > +		strcpy(cable_name, "JIG-UART-ON");
> > +		path = CONTROL1_SW_UART;
> > +		break;
> >  	default:
> >  		dev_err(info->dev, "failed to detect %s jig cable\n",
> >  			attached ? "attached" : "detached");
> > @@ -682,13 +684,13 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info)
> >  	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
> >  	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
> >  	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
> > +	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
> >  		/* JIG */
> >  		ret = max77693_muic_jig_handler(info, cable_type, attached);
> >  		if (ret < 0)
> >  			return ret;
> >  		break;
> >  	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
> > -	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
> >  	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
> >  	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
> >  		/*
> >