[PATCH] dvb:tc90522: fix stats report

[tskd08@gmail.com]

From: Akihiro Tsukada <tskd08@gmail.com>

* report per-transponder symbolrate instead of per-TS one (moved to dvb-core)
* add output TS-ID report, which might be useful if an user did not specify
  stream id or set a wrong one, and the demod chose the first TS_ID found.
---
 drivers/media/dvb-frontends/tc90522.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c
index bca81ef..b35d65c 100644
--- a/drivers/media/dvb-frontends/tc90522.c
+++ b/drivers/media/dvb-frontends/tc90522.c
@@ -216,32 +216,30 @@ static int tc90522s_get_frontend(struct dvb_frontend *fe)
 	c->delivery_system = SYS_ISDBS;
 
 	layers = 0;
-	ret = reg_read(state, 0xe8, val, 3);
+	ret = reg_read(state, 0xe6, val, 5);
 	if (ret == 0) {
-		int slots;
 		u8 v;
 
+		c->stream_id = val[0] << 8 | val[1];
+
 		/* high/single layer */
-		v = (val[0] & 0x70) >> 4;
+		v = (val[2] & 0x70) >> 4;
 		c->modulation = (v == 7) ? PSK_8 : QPSK;
 		c->fec_inner = fec_conv_sat[v];
 		c->layer[0].fec = c->fec_inner;
 		c->layer[0].modulation = c->modulation;
-		c->layer[0].segment_count = val[1] & 0x3f; /* slots */
+		c->layer[0].segment_count = val[3] & 0x3f; /* slots */
 
 		/* low layer */
-		v = (val[0] & 0x07);
+		v = (val[2] & 0x07);
 		c->layer[1].fec = fec_conv_sat[v];
 		if (v == 0)  /* no low layer */
 			c->layer[1].segment_count = 0;
 		else
-			c->layer[1].segment_count = val[2] & 0x3f; /* slots */
+			c->layer[1].segment_count = val[4] & 0x3f; /* slots */
 		/* actually, BPSK if v==1, but not defined in fe_modulation_t */
 		c->layer[1].modulation = QPSK;
 		layers = (v > 0) ? 2 : 1;
-
-		slots =  c->layer[0].segment_count +  c->layer[1].segment_count;
-		c->symbol_rate = 28860000 * slots / 48;
 	}
 
 	/* statistics */
-- 
2.1.2