All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 2/2] drm/i915: transform INTEL_OUTPUT_* into an enum
Date: Mon, 27 Oct 2014 17:47:52 -0200	[thread overview]
Message-ID: <1414439272-1885-2-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1414439272-1885-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Because I got annoyed that I had to document what values "int
ddi_personality" is supposed to hold.

A good side-effect of this change is that now the compilers can do
some additional checks on our code, which may prevent some bugs in the
future. A bad side-effect of this change is that now the compilers do
some additional checks on our code and complain when a switch
statement doesn't check for all possible values, so we need to add
"default" cases to all those switches. Hopefully, this may help
preventing confusions against DRM_MODE_CONNECTOR_* and
DRM_MODE_ENCODER_*.

I guess that just by looking at the patch, some people will think this
change is not worth its benefits. In this case, I don't really mind
dropping the patch.

Also, there's probably still a few more places where we can
s/int/enum intel_output_type/, but we can change that later, when we
spot the places.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  2 ++
 drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
 drivers/gpu/drm/i915/intel_drv.h     | 31 ++++++++++++++++---------------
 3 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 61ea8da..a79f83c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2971,6 +2971,8 @@ static int i9xx_pipe_crc_auto_source(struct drm_device *dev, enum pipe pipe,
 				break;
 			}
 			break;
+		default:
+			break;
 		}
 	}
 	drm_modeset_unlock_all(dev);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 16750c4..83b8771 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6269,6 +6269,8 @@ static int i9xx_crtc_mode_set(struct intel_crtc *crtc,
 		case INTEL_OUTPUT_DSI:
 			is_dsi = true;
 			break;
+		default:
+			break;
 		}
 
 		num_connectors++;
@@ -6597,6 +6599,8 @@ static void ironlake_init_pch_refclk(struct drm_device *dev)
 			if (enc_to_dig_port(&encoder->base)->port == PORT_A)
 				has_cpu_edp = true;
 			break;
+		default:
+			break;
 		}
 	}
 
@@ -6901,6 +6905,8 @@ static void lpt_init_pch_refclk(struct drm_device *dev)
 		case INTEL_OUTPUT_ANALOG:
 			has_vga = true;
 			break;
+		default:
+			break;
 		}
 	}
 
@@ -6934,6 +6940,8 @@ static int ironlake_get_refclk(struct drm_crtc *crtc)
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
 			break;
+		default:
+			break;
 		}
 		num_connectors++;
 	}
@@ -7188,6 +7196,8 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 		case INTEL_OUTPUT_HDMI:
 			is_sdvo = true;
 			break;
+		default:
+			break;
 		}
 
 		num_connectors++;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bf3267c..deb1bc6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -94,18 +94,20 @@
 
 /* these are outputs from the chip - integrated only
    external chips are via DVO or SDVO output */
-#define INTEL_OUTPUT_UNUSED 0
-#define INTEL_OUTPUT_ANALOG 1
-#define INTEL_OUTPUT_DVO 2
-#define INTEL_OUTPUT_SDVO 3
-#define INTEL_OUTPUT_LVDS 4
-#define INTEL_OUTPUT_TVOUT 5
-#define INTEL_OUTPUT_HDMI 6
-#define INTEL_OUTPUT_DISPLAYPORT 7
-#define INTEL_OUTPUT_EDP 8
-#define INTEL_OUTPUT_DSI 9
-#define INTEL_OUTPUT_UNKNOWN 10
-#define INTEL_OUTPUT_DP_MST 11
+enum intel_output_type {
+	INTEL_OUTPUT_UNUSED = 0,
+	INTEL_OUTPUT_ANALOG = 1,
+	INTEL_OUTPUT_DVO = 2,
+	INTEL_OUTPUT_SDVO = 3,
+	INTEL_OUTPUT_LVDS = 4,
+	INTEL_OUTPUT_TVOUT = 5,
+	INTEL_OUTPUT_HDMI = 6,
+	INTEL_OUTPUT_DISPLAYPORT = 7,
+	INTEL_OUTPUT_EDP = 8,
+	INTEL_OUTPUT_DSI = 9,
+	INTEL_OUTPUT_UNKNOWN = 10,
+	INTEL_OUTPUT_DP_MST = 11,
+};
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
@@ -136,7 +138,7 @@ struct intel_encoder {
 	 */
 	struct intel_crtc *new_crtc;
 
-	int type;
+	enum intel_output_type type;
 	unsigned int cloneable;
 	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
@@ -387,8 +389,7 @@ struct intel_crtc_config {
 	bool dp_encoder_is_mst;
 	int pbn;
 
-	/* This should be INTEL_OUTPUT_*. */
-	int ddi_personality;
+	enum intel_output_type ddi_personality;
 };
 
 struct intel_pipe_wm {
-- 
2.1.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2014-10-27 19:48 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-27 19:47 [PATCH 1/2] drm/i915: introduce pipe_config->ddi_personality Paulo Zanoni
2014-10-27 19:47 ` Paulo Zanoni [this message]
2014-10-28  7:55   ` [PATCH 2/2] drm/i915: transform INTEL_OUTPUT_* into an enum Daniel Vetter
2014-10-28  7:49 ` [PATCH 1/2] drm/i915: introduce pipe_config->ddi_personality Daniel Vetter
2014-10-28 10:46   ` Paulo Zanoni
2014-10-28 11:20     ` Daniel Vetter
2014-10-28 13:26   ` Paulo Zanoni
2014-10-28 14:30     ` Ville Syrjälä
2014-11-03 12:15       ` Daniel Vetter
2014-11-03 12:36         ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414439272-1885-2-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.