From: Joe Perches <joe@perches.com>
To: Fabian Frederick <fabf@skynet.be>
Cc: linux-kernel@vger.kernel.org,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH 1/1 net-next] net: dsa: replace count*size kmalloc by kmalloc_array
Date: Fri, 14 Nov 2014 10:47:15 -0800 [thread overview]
Message-ID: <1415990835.5912.20.camel@perches.com> (raw)
In-Reply-To: <1415990202-28673-1-git-send-email-fabf@skynet.be>
On Fri, 2014-11-14 at 19:36 +0100, Fabian Frederick wrote:
> kmalloc_array manages count*sizeof overflow.
Fundamentally correct, but is this necessary or useful?
sizeof(s8) isn't often going to be anything other than 1.
Would the kernel even work without that assumption?
> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
[]
> @@ -526,7 +526,8 @@ static int dsa_of_setup_routing_table(struct dsa_platform_data *pd,
>
> /* First time routing table allocation */
> if (!cd->rtable) {
> - cd->rtable = kmalloc(pd->nr_chips * sizeof(s8), GFP_KERNEL);
> + cd->rtable = kmalloc_array(pd->nr_chips, sizeof(s8),
> + GFP_KERNEL);
> if (!cd->rtable)
> return -ENOMEM;
>
Maybe all of these could be simplified
$ git grep -E "\*\s*sizeof\s*\(\s*[us]8\s*\)"
arch/arm/common/edma.c: (edma_cc->num_tc + 1) * sizeof(s8),
drivers/acpi/utils.c: (element->buffer.length * sizeof(u8));
drivers/acpi/utils.c: tail += element->buffer.length * sizeof(u8);
drivers/char/tpm/tpm_i2c_stm_st33.c: kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
drivers/char/tpm/tpm_i2c_stm_st33.c: kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
drivers/gpu/drm/r128/r128_state.c: mask_size = depth->n * sizeof(u8);
drivers/gpu/drm/r128/r128_state.c: mask_size = depth->n * sizeof(u8);
drivers/iio/common/st_sensors/st_sensors_spi.c: memcpy(data, tb->rx_buf, len*sizeof(u8));
drivers/infiniband/hw/amso1100/c2_mq.h: u8 pad[64 - sizeof(u16) - 2 * sizeof(u8) - sizeof(u32) - sizeof(u16)];
drivers/input/tablet/aiptek.c: const int sizeof_buf = 3 * sizeof(u8);
drivers/input/tablet/aiptek.c: const int sizeof_buf = 3 * sizeof(u8);
drivers/md/dm-crypt.c: memset(&cc->key, 0, cc->key_size * sizeof(u8));
drivers/md/dm-crypt.c: cc = kzalloc(sizeof(*cc) + key_size * sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib7000p.c: tx = kzalloc(2*sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib7000p.c: rx = kzalloc(2*sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib8000.c: client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib8000.c: client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib9000.c: client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
drivers/media/dvb-frontends/dib9000.c: client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
drivers/media/pci/ttpci/av7110_ipack.c: if (!(p->buf = vmalloc(size*sizeof(u8)))) {
drivers/mtd/inftlmount.c: s->nb_blocks * sizeof(u8));
drivers/net/wireless/ath/ath10k/htt.h: * b) num_chars * sizeof(u8) aligned to 4bytes */
drivers/net/wireless/b43/ppr.c: BUILD_BUG_ON(sizeof(struct b43_ppr) != B43_PPR_RATES_NUM * sizeof(u8));
drivers/net/wireless/iwlwifi/pcie/trans.c: trans_pcie->n_no_reclaim_cmds * sizeof(u8));
drivers/net/wireless/rtlwifi/efuse.c: memset(data, 0xff, PGPKT_DATA_SIZE * sizeof(u8));
drivers/net/wireless/rtlwifi/efuse.c: memset(tmpdata, 0xff, PGPKT_DATA_SIZE * sizeof(u8));
drivers/net/wireless/rtlwifi/efuse.c: u8 originaldata[8 * sizeof(u8)];
drivers/net/wireless/rtlwifi/efuse.c: u8 originaldata[8 * sizeof(u8)];
drivers/net/wireless/rtlwifi/efuse.c: memset(originaldata, 0xff, 8 * sizeof(u8));
drivers/net/wireless/rtlwifi/efuse.c: memset(target_pkt.data, 0xFF, 8 * sizeof(u8));
drivers/power/ds2781_battery.c: ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
drivers/power/ds2781_battery.c: ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
drivers/rtc/rtc-pcf2123.c: ret = spi_write(spi, txbuf, 2 * sizeof(u8));
drivers/rtc/rtc-pcf2123.c: ret = spi_write(spi, txbuf, 2 * sizeof(u8));
drivers/rtc/rtc-pcf2123.c: ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
drivers/rtc/rtc-pcf2123.c: rxbuf, 2 * sizeof(u8));
drivers/thermal/x86_pkg_temp_thermal.c: (max_phy_id+1) * sizeof(u8), GFP_ATOMIC);
fs/compat_ioctl.c: if (__copy_in_user(&tdata->read_write, &udata->read_write, 2 * sizeof(u8)))
net/dsa/dsa.c: cd->rtable = kmalloc(pd->nr_chips * sizeof(s8), GFP_KERNEL);
net/dsa/dsa.c: memset(cd->rtable, -1, pd->nr_chips * sizeof(s8));
next prev parent reply other threads:[~2014-11-14 18:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-14 18:36 [PATCH 1/1 net-next] net: dsa: replace count*size kmalloc by kmalloc_array Fabian Frederick
2014-11-14 18:47 ` Joe Perches [this message]
2014-11-14 19:02 ` Fabian Frederick
2014-11-14 19:14 ` Joe Perches
2014-11-14 19:32 ` Fabian Frederick
2014-11-14 19:42 ` Joe Perches
2014-11-16 19:43 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415990835.5912.20.camel@perches.com \
--to=joe@perches.com \
--cc=davem@davemloft.net \
--cc=fabf@skynet.be \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.