From: Johan Hovold <johan@kernel.org>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Bruno Thomsen <bth@kamstrup.dk>,
Sascha Hauer <s.hauer@pengutronix.de>,
Mark Rutland <mark.rutland@arm.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 09/10] net: phy: micrel: refactor interrupt config
Date: Wed, 19 Nov 2014 12:59:22 +0100 [thread overview]
Message-ID: <1416398363-32306-10-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1416398363-32306-1-git-send-email-johan@kernel.org>
Add generic interrupt-config callback and store interrupt-level bitmask
in type data for PHY types not using bit 9.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/phy/micrel.c | 71 ++++++++++++++++++++----------------------------
1 file changed, 29 insertions(+), 42 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 04fbee846b66..d7eb7b0e6d4e 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -55,8 +55,6 @@
#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
/* bitmap of PHY register to set interrupt mode */
#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
-#define KSZ9021_CTRL_INT_ACTIVE_HIGH BIT(14)
-#define KS8737_CTRL_INT_ACTIVE_HIGH BIT(14)
#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
/* Write/read to/from extended registers */
@@ -75,6 +73,7 @@
struct kszphy_type {
u32 led_mode_reg;
+ u16 interrupt_level_mask;
bool has_broadcast_disable;
bool has_rmii_ref_clk_sel;
};
@@ -105,6 +104,14 @@ static const struct kszphy_type ksz8081_type = {
.has_rmii_ref_clk_sel = true,
};
+static const struct kszphy_type ks8737_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
+static const struct kszphy_type ksz9021_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
static int kszphy_extended_write(struct phy_device *phydev,
u32 regnum, u16 val)
{
@@ -129,54 +136,31 @@ static int kszphy_ack_interrupt(struct phy_device *phydev)
return (rc < 0) ? rc : 0;
}
-static int kszphy_set_interrupt(struct phy_device *phydev)
-{
- int temp;
- temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
- KSZPHY_INTCS_ALL : 0;
- return phy_write(phydev, MII_KSZPHY_INTCS, temp);
-}
-
static int kszphy_config_intr(struct phy_device *phydev)
{
- int temp, rc;
-
- /* set the interrupt pin active low */
- temp = phy_read(phydev, MII_KSZPHY_CTRL);
- if (temp < 0)
- return temp;
- temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
- phy_write(phydev, MII_KSZPHY_CTRL, temp);
- rc = kszphy_set_interrupt(phydev);
- return rc < 0 ? rc : 0;
-}
+ const struct kszphy_type *type = phydev->drv->driver_data;
+ int temp;
+ u16 mask;
-static int ksz9021_config_intr(struct phy_device *phydev)
-{
- int temp, rc;
+ if (type && type->interrupt_level_mask)
+ mask = type->interrupt_level_mask;
+ else
+ mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
if (temp < 0)
return temp;
- temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
+ temp &= ~mask;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
- rc = kszphy_set_interrupt(phydev);
- return rc < 0 ? rc : 0;
-}
-static int ks8737_config_intr(struct phy_device *phydev)
-{
- int temp, rc;
+ /* enable / disable interrupts */
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ temp = KSZPHY_INTCS_ALL;
+ else
+ temp = 0;
- /* set the interrupt pin active low */
- temp = phy_read(phydev, MII_KSZPHY_CTRL);
- if (temp < 0)
- return temp;
- temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
- phy_write(phydev, MII_KSZPHY_CTRL, temp);
- rc = kszphy_set_interrupt(phydev);
- return rc < 0 ? rc : 0;
+ return phy_write(phydev, MII_KSZPHY_INTCS, temp);
}
static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
@@ -581,11 +565,12 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KS8737",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ks8737_type,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
- .config_intr = ks8737_config_intr,
+ .config_intr = kszphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = { .owner = THIS_MODULE,},
@@ -726,11 +711,12 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KSZ9021 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
.config_init = ksz9021_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
- .config_intr = ksz9021_config_intr,
+ .config_intr = kszphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_mmd_indirect = ksz9021_rd_mmd_phyreg,
@@ -742,11 +728,12 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KSZ9031 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
.config_init = ksz9031_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
- .config_intr = ksz9021_config_intr,
+ .config_intr = kszphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = { .owner = THIS_MODULE, },
--
2.0.4
next prev parent reply other threads:[~2014-11-19 11:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 11:59 [PATCH 00/10] net: phy: add device-type abstraction Johan Hovold
2014-11-19 11:59 ` [PATCH 01/10] net: phy: add static data field to struct phy_driver Johan Hovold
2014-11-19 11:59 ` [PATCH 02/10] net: phy: micrel: add device-type abstraction Johan Hovold
2014-11-19 11:59 ` [PATCH 03/10] net: phy: micrel: parse of nodes at probe Johan Hovold
2014-11-19 11:59 ` [PATCH 04/10] net: phy: micrel: add has-broadcast-disable flag to type data Johan Hovold
2014-11-19 11:59 ` [PATCH 05/10] net: phy: micrel: add generic clock-mode-select support Johan Hovold
2014-11-19 11:59 ` [PATCH 06/10] net: phy: micrel: add support for clock-mode select to KSZ8081/KSZ8091 Johan Hovold
2014-11-19 11:59 ` [PATCH 07/10] dt/bindings: reformat micrel eth-phy documentation Johan Hovold
2014-11-19 11:59 ` [PATCH 08/10] dt/bindings: add clock-select function property to micrel phy binding Johan Hovold
2014-11-20 9:08 ` Sascha Hauer
2014-11-19 11:59 ` Johan Hovold [this message]
2014-11-19 11:59 ` [PATCH 10/10] net: phy: micrel: add copyright entry Johan Hovold
2014-11-20 16:18 ` [PATCH 00/10] net: phy: add device-type abstraction Florian Fainelli
2014-11-21 19:16 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416398363-32306-10-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=bth@kamstrup.dk \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.