All of lore.kernel.org
 help / color / mirror / Atom feed
From: lauraa@codeaurora.org (Laura Abbott)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv6 3/8] arm64: Move cpu_resume into the text section
Date: Fri, 21 Nov 2014 13:50:40 -0800	[thread overview]
Message-ID: <1416606645-25633-4-git-send-email-lauraa@codeaurora.org> (raw)
In-Reply-To: <1416606645-25633-1-git-send-email-lauraa@codeaurora.org>

The function cpu_resume currently lives in the .data section.
There's no reason for it to be there since we can use relative
instructions without a problem. Move a few cpu_resume data
structures out of the assembly file so the .data annotation
can be dropped completely and cpu_resume ends up in the read
only text section.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
---
v6: Dropped the last bit of cruft after cpu_resume
---
 arch/arm64/kernel/sleep.S   | 36 ++++++------------------------------
 arch/arm64/kernel/suspend.c |  4 ++--
 2 files changed, 8 insertions(+), 32 deletions(-)

diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index a564b44..ede186c 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -147,14 +147,12 @@ cpu_resume_after_mmu:
 	ret
 ENDPROC(cpu_resume_after_mmu)
 
-	.data
 ENTRY(cpu_resume)
 	bl	el2_setup		// if in EL2 drop to EL1 cleanly
 #ifdef CONFIG_SMP
 	mrs	x1, mpidr_el1
-	adr	x4, mpidr_hash_ptr
-	ldr	x5, [x4]
-	add	x8, x4, x5		// x8 = struct mpidr_hash phys address
+	adrp	x8, mpidr_hash
+	add x8, x8, #:lo12:mpidr_hash // x8 = struct mpidr_hash phys address
         /* retrieve mpidr_hash members to compute the hash */
 	ldr	x2, [x8, #MPIDR_HASH_MASK]
 	ldp	w3, w4, [x8, #MPIDR_HASH_SHIFTS]
@@ -164,14 +162,15 @@ ENTRY(cpu_resume)
 #else
 	mov	x7, xzr
 #endif
-	adr	x0, sleep_save_sp
+	adrp	x0, sleep_save_sp
+	add	x0, x0, #:lo12:sleep_save_sp
 	ldr	x0, [x0, #SLEEP_SAVE_SP_PHYS]
 	ldr	x0, [x0, x7, lsl #3]
 	/* load sp from context */
 	ldr	x2, [x0, #CPU_CTX_SP]
-	adr	x1, sleep_idmap_phys
+	adrp	x1, sleep_idmap_phys
 	/* load physical address of identity map page table in x1 */
-	ldr	x1, [x1]
+	ldr	x1, [x1, #:lo12:sleep_idmap_phys]
 	mov	sp, x2
 	/*
 	 * cpu_do_resume expects x0 to contain context physical address
@@ -180,26 +179,3 @@ ENTRY(cpu_resume)
 	bl	cpu_do_resume		// PC relative jump, MMU off
 	b	cpu_resume_mmu		// Resume MMU, never returns
 ENDPROC(cpu_resume)
-
-	.align 3
-mpidr_hash_ptr:
-	/*
-	 * offset of mpidr_hash symbol from current location
-	 * used to obtain run-time mpidr_hash address with MMU off
-         */
-	.quad	mpidr_hash - .
-/*
- * physical address of identity mapped page tables
- */
-	.type	sleep_idmap_phys, #object
-ENTRY(sleep_idmap_phys)
-	.quad	0
-/*
- * struct sleep_save_sp {
- *	phys_addr_t *save_ptr_stash;
- *	phys_addr_t save_ptr_stash_phys;
- * };
- */
-	.type	sleep_save_sp, #object
-ENTRY(sleep_save_sp)
-	.space	SLEEP_SAVE_SP_SZ	// struct sleep_save_sp
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index 13ad4db..3771b72 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -126,8 +126,8 @@ int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	return ret;
 }
 
-extern struct sleep_save_sp sleep_save_sp;
-extern phys_addr_t sleep_idmap_phys;
+struct sleep_save_sp sleep_save_sp;
+phys_addr_t sleep_idmap_phys;
 
 static int __init cpu_suspend_init(void)
 {
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

  parent reply	other threads:[~2014-11-21 21:50 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-21 21:50 [PATCHv6 0/8] Better page protections for arm64 Laura Abbott
2014-11-21 21:50 ` [PATCHv6 1/8] arm64: Treat handle_arch_irq as a function pointer Laura Abbott
2014-11-21 21:50 ` [PATCHv6 2/8] arm64: Switch to adrp for loading the stub vectors Laura Abbott
2014-11-21 21:50 ` Laura Abbott [this message]
2014-11-21 21:50 ` [PATCHv6 4/8] arm64: Move some head.text functions to executable section Laura Abbott
2014-11-26 16:30   ` Mark Rutland
2014-11-26 17:11     ` Will Deacon
2014-11-21 21:50 ` [PATCHv6 5/8] arm64: Factor out fixmap initialiation from ioremap Laura Abbott
2014-11-21 21:50 ` [PATCHv6 6/8] arm64: use fixmap for text patching when text is RO Laura Abbott
2014-11-25 17:04   ` Mark Rutland
2014-11-25 18:54     ` Laura Abbott
2014-11-26 16:18       ` Mark Rutland
2014-12-02 15:59         ` Catalin Marinas
2014-11-21 21:50 ` [PATCHv6 7/8] arm64: efi: Use ioremap_exec for code sections Laura Abbott
2014-11-25 17:26   ` Mark Rutland
2014-11-25 18:57     ` Laura Abbott
2014-12-02 17:15   ` Catalin Marinas
2014-12-02 17:20     ` Ard Biesheuvel
2014-11-21 21:50 ` [PATCHv6] arm64: add better page protections to arm64 Laura Abbott
2014-12-02 18:28   ` Catalin Marinas
2015-01-14 19:26     ` Laura Abbott
2014-11-25 15:33 ` [PATCHv6 0/8] Better page protections for arm64 Will Deacon
2014-11-25 16:32 ` Kees Cook

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416606645-25633-4-git-send-email-lauraa@codeaurora.org \
    --to=lauraa@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.