From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.186]) by ozlabs.org (Postfix) with ESMTP id B06D367A39 for ; Wed, 6 Dec 2006 02:30:50 +1100 (EST) Message-Id: <14180968.30361165332648093.JavaMail.servlet@kundenserver> From: Thomas Denzinger To: Subject: AW: Re: Updating plb_temac to version 3.00.a on XILINX ml403 board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Date: Tue, 05 Dec 2006 16:30:48 +0100 Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Thank you Michael and also Ming for your help! I modified my design according Michael's files and compiled everything. But with my 2.4.20 MontaVista-Kernel and the XILINX BSP-software 'No PHY detected. Assuming a PHY at address 0.' errormessage is printed out and because of that a wrong speed (10Mbits) is set. I have to find out now why the PHY is not detected. I assume that only the GMII interface is used for that. Am I right? Thomas >>I have a plb_temac-design based on XAPP902 demodesign running. It's >>based on plb_temac version 2.00.a and hard_temac version 1.00.a. >>I tried to update to version 3.00 manually, because of incompatibility >>for automatic update. >>Up to now without success. >>Can somebody help me with a copy of .mhs and .ucf files, where the >>interface to the PHY and the PPC is correct? > >They're largish so I put copies of the ones I used with the ml403 on my >web server, look for: > >http://www.xyz.com/system.ucf >http://www.xyz.com/system.mhs > >I didn't clean out other unrelated changes. > >-michael -- Thomas Denzinger LesaMetric GmbH Hauptstrasse 46 35649 Bischoffen Tel.: 06444/931928 Fax : 06444/931912