From: Ian Campbell <Ian.Campbell@citrix.com>
To: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>,
xen-devel@lists.xen.org, Wei Liu <wei.liu2@citrix.com>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Subject: Re: [PATCH 5/5] tools/hotplug: support XENSTORED_TRACE in systemd
Date: Fri, 12 Dec 2014 10:10:56 +0000 [thread overview]
Message-ID: <1418379056.23309.45.camel@citrix.com> (raw)
In-Reply-To: <20141210175251.GA4441@aepfle.de>
On Wed, 2014-12-10 at 18:52 +0100, Olaf Hering wrote:
> On Wed, Dec 10, Ian Campbell wrote:
>
> > That results in a wrapper which unconditionally execs, the systemd unit
> > just calls that while the sysv script runs the wrapper and then does the
> > xenstore-read -s loop.
>
> Since systemd handles the socket there is already a listener.
> http://lists.freedesktop.org/archives/systemd-devel/2014-December/026157.html
Not sure I understand what any of that means, but I'll assume it's
good ;-)
> I came up with this, works in my testing with SLE11 sysv and Factory
> systemd. The beef looks like shown below. Let me know if thats good
> enough to handle XENSTORED_TRACE also in systemd. I will add some
> comments to the wrapper why it is there.
Seems ok. I wonder if the wrapper ought to source
@CONFIG_DIR@/@CONFIG_LEAF_DIR@/xencommons to obtain XENSTORED_* itself
rather than relying on the initscript and unit file to do so. Especially
in the initscript case it looks a bit ugly to have to manually propagate
things.
>
> Olaf
>
> diff --git a/tools/hotplug/Linux/init.d/xencommons.in b/tools/hotplug/Linux/init.d/xencommons.in
> index a1095c2..f57bfd3 100644
> --- a/tools/hotplug/Linux/init.d/xencommons.in
> +++ b/tools/hotplug/Linux/init.d/xencommons.in
> @@ -66,11 +66,13 @@ do_start () {
> then
> test -z "$XENSTORED_ROOTDIR" && XENSTORED_ROOTDIR="@XEN_LIB_STORED@"
> rm -f "$XENSTORED_ROOTDIR"/tdb* &>/dev/null
> - test -z "$XENSTORED_TRACE" || XENSTORED_ARGS=" -T /var/log/xen/xenstored-trace.log"
>
> if [ -n "$XENSTORED" ] ; then
> echo -n Starting $XENSTORED...
> - $XENSTORED --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
> + XENSTORED=$XENSTORED \
> + XENSTORED_TRACE=$XENSTORED_TRACE \
> + XENSTORED_ARGS=$XENSTORED_ARGS \
> + ${LIBEXEC_BIN}/xenstored.sh --pid-file /var/run/xenstored.pid
> else
> echo "No xenstored found"
> exit 1
> diff --git a/tools/hotplug/Linux/systemd/xenstored.service.in b/tools/hotplug/Linux/systemd/xenstored.service.in
> index 0f0ac58..d906ea2 100644
> --- a/tools/hotplug/Linux/systemd/xenstored.service.in
> +++ b/tools/hotplug/Linux/systemd/xenstored.service.in
> @@ -8,13 +8,12 @@ ConditionPathExists=/proc/xen/capabilities
>
> [Service]
> Type=notify
> -Environment=XENSTORED_ARGS=
> Environment=XENSTORED=@XENSTORED@
> -EnvironmentFile=-@CONFIG_DIR@/@CONFIG_LEAF_DIR@/xencommons
> +EnvironmentFile=@CONFIG_DIR@/@CONFIG_LEAF_DIR@/xencommons
> ExecStartPre=/bin/grep -q control_d /proc/xen/capabilities
> ExecStartPre=-/bin/rm -f @XEN_LIB_STORED@/tdb*
> ExecStartPre=/bin/mkdir -p @XEN_RUN_DIR@
> -ExecStart=/bin/sh -c "exec $XENSTORED --no-fork $XENSTORED_ARGS"
> +ExecStart=-@LIBEXEC_BIN@/xenstored.sh --no-fork
>
> [Install]
> WantedBy=multi-user.target
> diff --git a/tools/hotplug/Linux/xenstored.sh.in b/tools/hotplug/Linux/xenstored.sh.in
> new file mode 100644
> index 0000000..dc806ee
> --- /dev/null
> +++ b/tools/hotplug/Linux/xenstored.sh.in
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +if test -n "$XENSTORED_TRACE"
> +then
> + XENSTORED_ARGS=" -T /var/log/xen/xenstored-trace.log"
> +fi
> +exec $XENSTORED $@ $XENSTORED_ARGS
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
>
next prev parent reply other threads:[~2014-12-12 10:10 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 12:05 [PATCH 0/5] tools/hotplug: systemd changes for 4.5 Olaf Hering
2014-12-05 12:05 ` [PATCH 1/5] tools/hotplug: move XENSTORED_MOUNT_CTX to sysconfig.xencommons Olaf Hering
2014-12-05 12:20 ` Ian Jackson
2014-12-05 12:26 ` Olaf Hering
2014-12-05 12:32 ` Olaf Hering
2014-12-05 12:43 ` Ian Jackson
2014-12-05 13:27 ` Olaf Hering
2014-12-05 15:01 ` Ian Jackson
2014-12-05 15:35 ` Anthony PERARD
2014-12-05 15:51 ` Olaf Hering
2014-12-05 16:09 ` Anthony PERARD
2014-12-05 12:05 ` [PATCH 2/5] tools/hotplug: use existing sysconfig file for xenconsoled Olaf Hering
2014-12-05 12:05 ` [PATCH 3/5] tools/hotplug: remove EnvironmentFile from xen-qemu-dom0-disk-backend.service Olaf Hering
2014-12-05 12:05 ` [PATCH 4/5] tools/hotplug: remove XENSTORED_ROOTDIR from service file Olaf Hering
2014-12-05 12:21 ` Ian Jackson
2014-12-05 12:05 ` [PATCH 5/5] tools/hotplug: support XENSTORED_TRACE in systemd Olaf Hering
2014-12-05 12:24 ` Ian Jackson
2014-12-05 12:30 ` Olaf Hering
2014-12-05 12:51 ` Ian Jackson
2014-12-05 13:31 ` Olaf Hering
2014-12-08 12:37 ` Olaf Hering
2014-12-09 16:09 ` Ian Jackson
2014-12-09 16:27 ` Olaf Hering
2014-12-09 16:46 ` Ian Jackson
2014-12-10 9:15 ` Olaf Hering
2014-12-10 10:02 ` Ian Campbell
2014-12-10 10:08 ` Olaf Hering
2014-12-10 17:52 ` Olaf Hering
2014-12-12 10:10 ` Ian Campbell [this message]
2014-12-12 11:37 ` Olaf Hering
2014-12-12 11:47 ` Ian Campbell
2014-12-12 12:08 ` M A Young
2014-12-12 12:12 ` Olaf Hering
2014-12-12 15:06 ` Olaf Hering
2014-12-10 18:01 ` Olaf Hering
2014-12-12 10:07 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418379056.23309.45.camel@citrix.com \
--to=ian.campbell@citrix.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=olaf@aepfle.de \
--cc=stefano.stabellini@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.