[Qemu-devel] [PATCH v3 8/9] rocker: add tests

All of lore.kernel.org
 help / color / mirror / Atom feed

From: sfeldma@gmail.com
To: qemu-devel@nongnu.org, jiri@resnulli.us,
	roopa@cumulusnetworks.com, john.fastabend@gmail.com,
	eblake@redhat.com, pbonzini@redhat.com, stefanha@gmail.com
Subject: [Qemu-devel] [PATCH v3 8/9] rocker: add tests
Date: Sat, 10 Jan 2015 19:57:51 -0800	[thread overview]
Message-ID: <1420948672-50103-9-git-send-email-sfeldma@gmail.com> (raw)
In-Reply-To: <1420948672-50103-1-git-send-email-sfeldma@gmail.com>

From: Scott Feldman <sfeldma@gmail.com>

Add some basic test for rocker to test L2/L3/L4 functionality.  Requires an
external test environment, simp, located here:

https://github.com/scottfeldman/simp

To run tests, simp environment must be installed and a suitable VM image built
and installed with a Linux 3.18 (or greater) kernel with rocker driver support
enabled.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
---
 hw/net/rocker/test/README          |    5 +++
 hw/net/rocker/test/all             |   19 +++++++++++
 hw/net/rocker/test/bridge          |   43 ++++++++++++++++++++++++
 hw/net/rocker/test/bridge-stp      |   52 +++++++++++++++++++++++++++++
 hw/net/rocker/test/bridge-vlan     |   52 +++++++++++++++++++++++++++++
 hw/net/rocker/test/bridge-vlan-stp |   64 ++++++++++++++++++++++++++++++++++++
 hw/net/rocker/test/port            |   22 +++++++++++++
 hw/net/rocker/test/tut.dot         |    8 +++++
 8 files changed, 265 insertions(+)
 create mode 100644 hw/net/rocker/test/README
 create mode 100755 hw/net/rocker/test/all
 create mode 100755 hw/net/rocker/test/bridge
 create mode 100755 hw/net/rocker/test/bridge-stp
 create mode 100755 hw/net/rocker/test/bridge-vlan
 create mode 100755 hw/net/rocker/test/bridge-vlan-stp
 create mode 100755 hw/net/rocker/test/port
 create mode 100644 hw/net/rocker/test/tut.dot

diff --git a/hw/net/rocker/test/README b/hw/net/rocker/test/README
new file mode 100644
index 0000000..531e673
--- /dev/null
+++ b/hw/net/rocker/test/README
@@ -0,0 +1,5 @@
+Tests require simp (simple network simulator) found here:
+
+https://github.com/scottfeldman/simp
+
+Run 'all' to run all tests.
diff --git a/hw/net/rocker/test/all b/hw/net/rocker/test/all
new file mode 100755
index 0000000..d5ae963
--- /dev/null
+++ b/hw/net/rocker/test/all
@@ -0,0 +1,19 @@
+echo -n "Running port test...              "
+./port
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge test...            "
+./bridge
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge STP test...        "
+./bridge-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN test...       "
+./bridge-vlan
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN STP test...   "
+./bridge-vlan-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
diff --git a/hw/net/rocker/test/bridge b/hw/net/rocker/test/bridge
new file mode 100755
index 0000000..f1f555a
--- /dev/null
+++ b/hw/net/rocker/test/bridge
@@ -0,0 +1,43 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig br0 11.0.0.3/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+if [ $? -ne 0 ]; then exit 1; fi
+simp ssh tut h1 --cmd "ping -c10 11.0.0.3 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-stp b/hw/net/rocker/test/bridge-stp
new file mode 100755
index 0000000..60f4483
--- /dev/null
+++ b/hw/net/rocker/test/bridge-stp
@@ -0,0 +1,52 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-vlan b/hw/net/rocker/test/bridge-vlan
new file mode 100755
index 0000000..faef827
--- /dev/null
+++ b/hw/net/rocker/test/bridge-vlan
@@ -0,0 +1,52 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-vlan-stp b/hw/net/rocker/test/bridge-vlan-stp
new file mode 100755
index 0000000..2e4e334
--- /dev/null
+++ b/hw/net/rocker/test/bridge-vlan-stp
@@ -0,0 +1,64 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/port b/hw/net/rocker/test/port
new file mode 100755
index 0000000..3437f7d
--- /dev/null
+++ b/hw/net/rocker/test/port
@@ -0,0 +1,22 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# bring up DUT ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 12.0.0.1/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 12.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.1 >/dev/null"
+if [ $? -eq 1 ]; then exit 1; fi
+simp ssh tut h2 --cmd "ping -c10 12.0.0.1 >/dev/null"
diff --git a/hw/net/rocker/test/tut.dot b/hw/net/rocker/test/tut.dot
new file mode 100644
index 0000000..87f7266
--- /dev/null
+++ b/hw/net/rocker/test/tut.dot
@@ -0,0 +1,8 @@
+graph G {
+	graph [hostidtype="hostname", version="1:0", date="04/12/2013"];
+	edge [dir=none, notify="log"];
+	sw1:swp1 -- h1:swp1;
+	sw1:swp2 -- h2:swp1;
+	sw1:swp3 -- h3:swp1;
+	sw1:swp4 -- h4:swp1;
+}
-- 
1.7.10.4

next prev parent reply	other threads:[~2015-01-11  3:57 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-11  3:57 [Qemu-devel] [PATCH v3 0/9] rocker: add new rocker ethernet switch device sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 1/9] net: add MAC address string printer sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 2/9] virtio-net: use qemu_mac_strdup_printf sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 3/9] rocker: add register programming guide sfeldma
2015-01-12 11:40   ` Paolo Bonzini
2015-01-16  8:14     ` Scott Feldman
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 4/9] pci: add rocker device ID sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 5/9] pci: add network device class 'other' for network switches sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 6/9] rocker: add new rocker switch device sfeldma
2015-01-12 12:57   ` Paolo Bonzini
2015-01-14 23:20     ` Scott Feldman
2015-01-15  9:08       ` Paolo Bonzini
2015-01-16  9:15   ` Jason Wang
2015-01-16  9:48     ` Scott Feldman
2015-01-21  3:36       ` Jason Wang
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 7/9] qmp: add rocker device support sfeldma
2015-01-16  9:26   ` Jason Wang
2015-01-16  9:59     ` Scott Feldman
2015-01-11  3:57 ` sfeldma [this message]
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 9/9] MAINTAINERS: add rocker sfeldma

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:531e673 dfblob:d5ae963 dfblob:f1f555a dfblob:60f4483
dfblob:faef827 dfblob:2e4e334 dfblob:3437f7d dfblob:87f7266 )
 OR (
bs:"[Qemu-devel] [PATCH v3 8/9] rocker: add tests" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420948672-50103-9-git-send-email-sfeldma@gmail.com \
    --to=sfeldma@gmail.com \
    --cc=eblake@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=john.fastabend@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=roopa@cumulusnetworks.com \
    --cc=stefanha@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.