All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 3/3] gpio: sysfs: fix gpio attribute-creation race
Date: Tue, 13 Jan 2015 13:00:06 +0100	[thread overview]
Message-ID: <1421150406-20255-4-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1421150406-20255-1-git-send-email-johan@kernel.org>

Fix attribute-creation race with userspace by using the default group
to create also the contingent gpio device attributes.

Fixes: d8f388d8dc8d ("gpio: sysfs interface")
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/gpio/gpiolib-sysfs.c | 61 ++++++++++++++++++++++++++++----------------
 drivers/gpio/gpiolib.h       |  1 +
 2 files changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index fd4d9423f6e6..f62aa115d79a 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -356,12 +356,44 @@ static ssize_t gpio_active_low_store(struct device *dev,
 static DEVICE_ATTR(active_low, 0644,
 		gpio_active_low_show, gpio_active_low_store);
 
+static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
+			       int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct gpio_desc *desc = dev_get_drvdata(dev);
+	umode_t mode = attr->mode;
+	bool show_direction = test_bit(FLAG_SYSFS_DIR, &desc->flags);
+
+	if (attr == &dev_attr_direction.attr) {
+		if (!show_direction)
+			mode = 0;
+	} else if (attr == &dev_attr_edge.attr) {
+		if (gpiod_to_irq(desc) < 0)
+			mode = 0;
+		if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags))
+			mode = 0;
+	}
+
+	return mode;
+}
+
 static struct attribute *gpio_attrs[] = {
+	&dev_attr_direction.attr,
+	&dev_attr_edge.attr,
 	&dev_attr_value.attr,
 	&dev_attr_active_low.attr,
 	NULL,
 };
-ATTRIBUTE_GROUPS(gpio);
+
+static const struct attribute_group gpio_group = {
+	.attrs = gpio_attrs,
+	.is_visible = gpio_is_visible,
+};
+
+static const struct attribute_group *gpio_groups[] = {
+	&gpio_group,
+	NULL
+};
 
 /*
  * /sys/class/gpio/gpiochipN/
@@ -550,8 +582,11 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 		goto fail_unlock;
 	}
 
-	if (!desc->chip->direction_input || !desc->chip->direction_output)
-		direction_may_change = false;
+	if (desc->chip->direction_input && desc->chip->direction_output &&
+			direction_may_change) {
+		set_bit(FLAG_SYSFS_DIR, &desc->flags);
+	}
+
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	offset = gpio_chip_hwgpio(desc);
@@ -567,27 +602,10 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 		goto fail_unlock;
 	}
 
-	if (direction_may_change) {
-		status = device_create_file(dev, &dev_attr_direction);
-		if (status)
-			goto fail_unregister_device;
-	}
-
-	if (gpiod_to_irq(desc) >= 0 && (direction_may_change ||
-				       !test_bit(FLAG_IS_OUT, &desc->flags))) {
-		status = device_create_file(dev, &dev_attr_edge);
-		if (status)
-			goto fail_remove_attr_direction;
-	}
-
 	set_bit(FLAG_EXPORT, &desc->flags);
 	mutex_unlock(&sysfs_lock);
 	return 0;
 
-fail_remove_attr_direction:
-	device_remove_file(dev, &dev_attr_direction);
-fail_unregister_device:
-	device_unregister(dev);
 fail_unlock:
 	mutex_unlock(&sysfs_lock);
 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
@@ -711,6 +729,7 @@ void gpiod_unexport(struct gpio_desc *desc)
 		dev = class_find_device(&gpio_class, NULL, desc, match_export);
 		if (dev) {
 			gpio_setup_irq(desc, dev, 0);
+			clear_bit(FLAG_SYSFS_DIR, &desc->flags);
 			clear_bit(FLAG_EXPORT, &desc->flags);
 		} else
 			status = -ENODEV;
@@ -719,8 +738,6 @@ void gpiod_unexport(struct gpio_desc *desc)
 	mutex_unlock(&sysfs_lock);
 
 	if (dev) {
-		device_remove_file(dev, &dev_attr_edge);
-		device_remove_file(dev, &dev_attr_direction);
 		device_unregister(dev);
 		put_device(dev);
 	}
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index e3a52113a541..550a5eafbd38 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -77,6 +77,7 @@ struct gpio_desc {
 #define FLAG_OPEN_DRAIN	7	/* Gpio is open drain type */
 #define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
 #define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
+#define FLAG_SYSFS_DIR	10	/* show sysfs direction attribute */
 
 #define ID_SHIFT	16	/* add new flags before this one */
 
-- 
2.0.5


  parent reply	other threads:[~2015-01-13 12:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-13 12:00 [PATCH 0/3] gpio: sysfs: fix attribute leaks and races Johan Hovold
2015-01-13 12:00 ` [PATCH 1/3] gpio: sysfs: fix gpio-chip device-attribute leak Johan Hovold
2015-01-25  9:25   ` Alexandre Courbot
2015-01-13 12:00 ` [PATCH 2/3] gpio: sysfs: fix gpio " Johan Hovold
2015-01-25  9:27   ` Alexandre Courbot
2015-01-25  9:30     ` Alexandre Courbot
2015-01-13 12:00 ` Johan Hovold [this message]
2015-01-25  9:33   ` [PATCH 3/3] gpio: sysfs: fix gpio attribute-creation race Alexandre Courbot
2015-01-25 10:16     ` Johan Hovold
2015-01-15 16:33 ` [PATCH 0/3] gpio: sysfs: fix attribute leaks and races Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421150406-20255-4-git-send-email-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.