From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 1/8] avr32: use dlmalloc for DMA buffers
Date: Wed, 28 Jan 2015 01:15:59 +0100 [thread overview]
Message-ID: <1422404166-6898-2-git-send-email-andreas.devel@googlemail.com> (raw)
In-Reply-To: <1422404166-6898-1-git-send-email-andreas.devel@googlemail.com>
Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
Changes in v1: None
arch/avr32/include/asm/dma-mapping.h | 7 ++++-
arch/avr32/lib/board.c | 51 ----------------------------------
include/configs/atngw100.h | 1 -
include/configs/atngw100mkii.h | 1 -
include/configs/atstk1002.h | 1 -
include/configs/atstk1006.h | 1 -
include/configs/favr-32-ezkit.h | 1 -
include/configs/grasshopper.h | 1 -
include/configs/hammerhead.h | 1 -
include/configs/mimc200.h | 1 -
10 files changed, 6 insertions(+), 60 deletions(-)
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index dbdd2fe..1cde827 100644
--- a/arch/avr32/include/asm/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -14,7 +14,12 @@ enum dma_data_direction {
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
};
-extern void *dma_alloc_coherent(size_t len, unsigned long *handle);
+
+static inline void *dma_alloc_coherent(size_t len, unsigned long *handle)
+{
+ *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
+ return (void *)*handle;
+}
static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
enum dma_data_direction dir)
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index bf0997f..7d13ac5 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -45,50 +45,6 @@ int cpu_mmc_init(bd_t *bd)
return atmel_mci_init((void *)ATMEL_BASE_MMCI);
}
-#ifdef CONFIG_SYS_DMA_ALLOC_LEN
-#include <asm/arch/cacheflush.h>
-#include <asm/io.h>
-
-static unsigned long dma_alloc_start;
-static unsigned long dma_alloc_end;
-static unsigned long dma_alloc_brk;
-
-static void dma_alloc_init(void)
-{
- unsigned long monitor_addr;
-
- monitor_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
- dma_alloc_end = monitor_addr - CONFIG_SYS_MALLOC_LEN;
- dma_alloc_start = dma_alloc_end - CONFIG_SYS_DMA_ALLOC_LEN;
- dma_alloc_brk = dma_alloc_start;
-
- printf("DMA: Using memory from 0x%08lx to 0x%08lx\n",
- dma_alloc_start, dma_alloc_end);
-
- invalidate_dcache_range((unsigned long)cached(dma_alloc_start),
- dma_alloc_end);
-}
-
-void *dma_alloc_coherent(size_t len, unsigned long *handle)
-{
- unsigned long paddr = dma_alloc_brk;
-
- if (dma_alloc_brk + len > dma_alloc_end)
- return NULL;
-
- dma_alloc_brk = ((paddr + len + CONFIG_SYS_DCACHE_LINESZ - 1)
- & ~(CONFIG_SYS_DCACHE_LINESZ - 1));
-
- *handle = paddr;
- return uncached(paddr);
-}
-#else
-static inline void dma_alloc_init(void)
-{
-
-}
-#endif
-
static int init_baudrate(void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
@@ -180,12 +136,6 @@ void board_init_f(ulong board_type)
/* Reserve memory for malloc() */
addr -= CONFIG_SYS_MALLOC_LEN;
-#ifdef CONFIG_SYS_DMA_ALLOC_LEN
- /* Reserve DMA memory (must be cache aligned) */
- addr &= ~(CONFIG_SYS_DCACHE_LINESZ - 1);
- addr -= CONFIG_SYS_DMA_ALLOC_LEN;
-#endif
-
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
printf("LCD: Frame buffer allocated at preset 0x%08x\n",
@@ -264,7 +214,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
/* The malloc area is right below the monitor image in RAM */
mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
- dma_alloc_init();
enable_interrupts();
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 9c81e31..540e86a 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -143,7 +143,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 7b4f9cf..35eae76 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -164,7 +164,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 8f3fd0b..9e58238 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -158,7 +158,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index bbe0aea..25090a6 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -159,7 +159,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 338d3dc..75bff4c 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -162,7 +162,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index 73534ad..83f0ed2 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -151,7 +151,6 @@
CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 4f0603a..0bc42f1 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -137,7 +137,6 @@
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index fc7ecfa..2fd3add 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -157,7 +157,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
--
1.7.10.4
next prev parent reply other threads:[~2015-01-28 0:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-28 0:15 [U-Boot] [PATCH v1 0/8] avr32: add generic board Andreas Bießmann
2015-01-28 0:15 ` Andreas Bießmann [this message]
2015-01-28 0:16 ` [U-Boot] [PATCH v1 2/8] avr32: rename cpu_init() -> arch_cpu_init() Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 3/8] avr32: factor out cpu_mmc_init() Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 4/8] avr32: rename mmu.h definitions Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 5/8] common/board_r: manual relocation for cmd table Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 6/8] avr32: add generic board support Andreas Bießmann
2015-01-28 3:09 ` Simon Glass
2015-01-28 10:04 ` Andreas Bießmann
2015-01-28 16:34 ` Simon Glass
2015-01-28 0:16 ` [U-Boot] [PATCH v1 7/8] grasshopper: enable generic board Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 8/8] atstk1002: " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422404166-6898-2-git-send-email-andreas.devel@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.