From: Peter Hung <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
peter_hong@fintek.com.tw,
Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH v3 3/5] usb: serial: implement function for F81232
Date: Wed, 28 Jan 2015 13:58:16 +0800 [thread overview]
Message-ID: <1422424696-7479-1-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
This patch implement the following function:
set_termios, tiocmset, tiocmget, dtr_rts
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81232.c | 103 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 84 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index b372975..9a54f56 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -346,27 +346,99 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- /* FIXME - Stubbed out for now */
+ u16 divisor;
+ u16 new_lcr = 0;
+ int status;
+ struct ktermios *termios = &tty->termios;
+ struct usb_device *dev = port->serial->dev;
+ unsigned int cflag = termios->c_cflag;
- /* Don't change anything if nothing has changed */
- if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
- return;
+ divisor = calc_baud_divisor(tty_get_baud_rate(tty));
+
+ status = f81232_set_register(dev, LINE_CONTROL_REGISTER,
+ UART_LCR_DLAB); /* DLAB */
+
+ status = f81232_set_register(dev, RECEIVE_BUFFER_REGISTER,
+ divisor & 0x00ff); /* low */
+
+ status = f81232_set_register(dev, INTERRUPT_ENABLE_REGISTER,
+ (divisor & 0xff00) >> 8); /* high */
+
+ status = f81232_set_register(dev, LINE_CONTROL_REGISTER, 0x00);
+
+
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ new_lcr |= UART_LCR_PARITY; /* odd */
+ else
+ new_lcr |= SERIAL_EVEN_PARITY; /* even */
+ }
+
+ if (cflag & CSTOPB)
+ new_lcr |= UART_LCR_STOP;
+ else
+ new_lcr &= ~UART_LCR_STOP;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ status |= f81232_set_register(dev, LINE_CONTROL_REGISTER, new_lcr);
+
+ status |= f81232_set_register(dev, FIFO_CONTROL_REGISTER,
+ 0x87); /* fifo, trigger8 */
+ status |= f81232_set_register(dev,
+ INTERRUPT_ENABLE_REGISTER, 0xf); /* IER */
+
+ if (status < 0)
+ dev_err(&port->dev, "LINE_CONTROL_REGISTER set error: %d\n",
+ status);
- /* Do the real work here... */
- if (old_termios)
- tty_termios_copy_hw(&tty->termios, old_termios);
}
static int f81232_tiocmget(struct tty_struct *tty)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ int r;
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 mcr, msr;
+
+ spin_lock_irqsave(&port_priv->lock, flags);
+ mcr = port_priv->line_control;
+ msr = port_priv->line_status;
+ spin_unlock_irqrestore(&port_priv->lock, flags);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
}
static int f81232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
- /* FIXME - Stubbed out for now */
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv =
+ usb_get_serial_port_data(port);
+
+ update_mctrl(port_priv, set, clear);
return 0;
}
@@ -403,18 +475,11 @@ static void f81232_close(struct usb_serial_port *port)
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- u8 control;
- spin_lock_irqsave(&priv->lock, flags);
- /* Change DTR and RTS */
if (on)
- priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ update_mctrl(priv, TIOCM_DTR | TIOCM_RTS, 0);
else
- priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- control = priv->line_control;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, control);
+ update_mctrl(priv, 0, TIOCM_DTR | TIOCM_RTS);
}
static int f81232_carrier_raised(struct usb_serial_port *port)
--
1.9.1
reply other threads:[~2015-01-28 5:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422424696-7479-1-git-send-email-hpeter+linux_kernel@gmail.com \
--to=hpeter@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpeter+linux_kernel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter_hong@fintek.com.tw \
--cc=tom_tsai@fintek.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.