From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ivan T. Ivanov" Subject: Re: [PATCH v5 0/2] Initial support for voltage ADC Date: Wed, 28 Jan 2015 10:25:40 +0200 Message-ID: <1422433540.5754.6.camel@mm-sol.com> References: <1421748922-8933-1-git-send-email-iivanov@mm-sol.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1421748922-8933-1-git-send-email-iivanov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org To: Jonathan Cameron Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald , Grant Likely , Rob Herring , linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm List-Id: linux-arm-msm@vger.kernel.org On Tue, 2015-01-20 at 12:15 +0200, Ivan T. Ivanov wrote: > This type of volatage ADC could be found in Qualcomm's SPMI PMIC's. > I'm sorry that it took me so long to send the updated version. > > Changes since v4. > - Addressed review comments from Hartmut Knaack and Jonathan Cameron: > Fixed spelling errors in DT description files. > Removed unused structure member. > Access to hardware during conversion is protected with mutex. > Measuring reference points moved at driver probe time. > > Patches are based on current iio/testing branch. Hi, Are there any comments on these patches? Regards, Ivan > > v4 could be found here: https://lkml.org/lkml/2014/11/3/425 > > Stanimir Varbanov (2): > DT: iio: vadc: document dt binding > iio: vadc: Qualcomm SPMI PMIC voltage ADC driver > > .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129 +++ > drivers/iio/adc/Kconfig | 14 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/qcom-spmi-vadc.c | 1016 ++++++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-vadc.h | 119 +++ > 5 files changed, 1279 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c > create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h > > -- > 1.9.1 > >