From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 39/42] block: introduce BDRV_REQUEST_MAX_SECTORS
Date: Fri, 6 Feb 2015 17:40:46 +0100 [thread overview]
Message-ID: <1423240849-15499-40-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1423240849-15499-1-git-send-email-kwolf@redhat.com>
From: Peter Lieven <pl@kamp.de>
we check and adjust request sizes at several places with
sometimes inconsistent checks or default values:
INT_MAX
INT_MAX >> BDRV_SECTOR_BITS
UINT_MAX >> BDRV_SECTOR_BITS
SIZE_MAX >> BDRV_SECTOR_BITS
This patches introdocues a macro for the maximal allowed sectors
per request and uses it at several places.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 21 +++++++++------------
hw/block/virtio-blk.c | 4 ++--
include/block/block.h | 3 +++
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/block.c b/block.c
index 8272ef9..49e0073 100644
--- a/block.c
+++ b/block.c
@@ -2647,7 +2647,7 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
{
int64_t len;
- if (size > INT_MAX) {
+ if (size > BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) {
return -EIO;
}
@@ -2671,7 +2671,7 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
int nb_sectors)
{
- if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EIO;
}
@@ -2758,7 +2758,7 @@ static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
.iov_len = nb_sectors * BDRV_SECTOR_SIZE,
};
- if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -2826,13 +2826,10 @@ int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
}
for (;;) {
- nb_sectors = target_sectors - sector_num;
+ nb_sectors = MIN(target_sectors - sector_num, BDRV_REQUEST_MAX_SECTORS);
if (nb_sectors <= 0) {
return 0;
}
- if (nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
- nb_sectors = INT_MAX / BDRV_SECTOR_SIZE;
- }
ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
if (ret < 0) {
error_report("error getting block status at sector %" PRId64 ": %s",
@@ -3167,7 +3164,7 @@ static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
- if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -3202,8 +3199,8 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
struct iovec iov = {0};
int ret = 0;
- int max_write_zeroes = bs->bl.max_write_zeroes ?
- bs->bl.max_write_zeroes : INT_MAX;
+ int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes,
+ BDRV_REQUEST_MAX_SECTORS);
while (nb_sectors > 0 && !ret) {
int num = nb_sectors;
@@ -3458,7 +3455,7 @@ static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
- if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -5120,7 +5117,7 @@ int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
return 0;
}
- max_discard = bs->bl.max_discard ? bs->bl.max_discard : INT_MAX;
+ max_discard = MIN_NON_ZERO(bs->bl.max_discard, BDRV_REQUEST_MAX_SECTORS);
while (nb_sectors > 0) {
int ret;
int num = nb_sectors;
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 8c51a29..1a8a176 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -381,7 +381,7 @@ void virtio_blk_submit_multireq(BlockBackend *blk, MultiReqBuffer *mrb)
}
max_xfer_len = blk_get_max_transfer_length(mrb->reqs[0]->dev->blk);
- max_xfer_len = MIN_NON_ZERO(max_xfer_len, INT_MAX);
+ max_xfer_len = MIN_NON_ZERO(max_xfer_len, BDRV_REQUEST_MAX_SECTORS);
qsort(mrb->reqs, mrb->num_reqs, sizeof(*mrb->reqs),
&multireq_compare);
@@ -447,7 +447,7 @@ static bool virtio_blk_sect_range_ok(VirtIOBlock *dev,
uint64_t nb_sectors = size >> BDRV_SECTOR_BITS;
uint64_t total_sectors;
- if (nb_sectors > INT_MAX) {
+ if (nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return false;
}
if (sector & dev->sector_mask) {
diff --git a/include/block/block.h b/include/block/block.h
index 3082d2b..25a6d62 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -83,6 +83,9 @@ typedef enum {
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
+#define BDRV_REQUEST_MAX_SECTORS MIN(SIZE_MAX >> BDRV_SECTOR_BITS, \
+ INT_MAX >> BDRV_SECTOR_BITS)
+
/*
* Allocation status flags
* BDRV_BLOCK_DATA: data is read from bs->file or another file
--
1.8.3.1
next prev parent reply other threads:[~2015-02-06 16:41 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 16:40 [Qemu-devel] [PULL 00/42] Block patches Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 01/42] Restore atapi_dma flag across migration Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 02/42] atapi migration: Throw recoverable error to avoid recovery Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 03/42] block/raw-posix: create translate_err helper to merge errno values Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 04/42] block/raw-posix: create do_fallocate helper Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 05/42] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Kevin Wolf
2015-02-12 2:29 ` Peter Maydell
2015-02-12 4:44 ` Denis V. Lunev
2015-02-06 16:40 ` [Qemu-devel] [PULL 06/42] block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 07/42] block/raw-posix: call plain fallocate " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 08/42] block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 09/42] block: change default for discard and write zeroes to INT_MAX Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 10/42] qemu-img: Add QEMU_PKGVERSION to QEMU_IMG_VERSION Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 11/42] qed: Really remove unused field QEDAIOCB.finished Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 12/42] block: add accounting for merged requests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 13/42] hw/virtio-blk: add a constant for max number of " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 14/42] block-backend: expose bs->bl.max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 15/42] virtio-blk: introduce multiread Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 16/42] virtio-blk: add a knob to disable request merging Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 17/42] qemu-iotests: Fix supported_oses check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 18/42] iotests: Specify format for qemu-nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 19/42] block: add event when disk usage exceeds threshold Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 20/42] block/dmg: properly detect the UDIF trailer Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 21/42] block/dmg: extract mish block decoding functionality Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 22/42] block/dmg: extract processing of resource forks Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 23/42] block/dmg: process a buffer instead of reading ints Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 24/42] block/dmg: validate chunk size to avoid overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 25/42] block/dmg: process XML plists Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 26/42] block/dmg: set virtual size to a non-zero value Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 27/42] block/dmg: fix sector data offset calculation Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 28/42] block/dmg: use SectorNumber from BLKX header Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 29/42] block/dmg: factor out block type check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 30/42] block/dmg: support bzip2 block entry types Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 31/42] block/dmg: improve zeroes handling Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 32/42] qed: check for header size overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 33/42] qemu-iotests: add 116 invalid QED input file tests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 34/42] block: fix off-by-one error in qcow and qcow2 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 35/42] iotests: Fix 083 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 36/42] iotests: Fix 100 for nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 37/42] iotests: Fix 104 for NBD Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 38/42] nbd: Improve error messages Kevin Wolf
2015-02-06 16:40 ` Kevin Wolf [this message]
2015-02-06 16:40 ` [Qemu-devel] [PULL 40/42] nbd: fix max_discard/max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 41/42] block: Give always priority to unused entries in the qcow2 L2 cache Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 42/42] qcow2: Rewrite qcow2_alloc_bytes() Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423240849-15499-40-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.