From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Alban Browaeys <alban.browaeys@gmail.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>
Subject: [PATCH v2 1/3] clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
Date: Fri, 6 Feb 2015 11:42:43 -0800 [thread overview]
Message-ID: <1423251765-2947-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1423251765-2947-1-git-send-email-sboyd@codeaurora.org>
of_clk_get_by_clkspec() returns a struct clk pointer but it
doesn't create a new handle for the consumers when we're using
the common clock framework. Instead it just returns whatever the
clk provider hands out. When the consumers go to call clk_put()
we get an Oops.
Unable to handle kernel paging request at virtual address 00200200
pgd = c0004000
[00200200] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc1-00104-ga251361a-dirty #992
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task: ee00b000 ti: ee088000 task.ti: ee088000
PC is at __clk_put+0x24/0xd0
LR is at clk_prepare_lock+0xc/0xec
pc : [<c03eef38>] lr : [<c03ec1f4>] psr: 20000153
sp : ee089de8 ip : 00000000 fp : 00000000
r10: ee02f480 r9 : 00000001 r8 : 00000000
r7 : ee031cc0 r6 : ee089e08 r5 : 00000000 r4 : ee02f480
r3 : 00100100 r2 : 00200200 r1 : 0000091e r0 : 00000001
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 4000404a DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xee088238)
Stack: (0xee089de8 to 0xee08a000)
9de0: ee7c8f14 c03f0ec8 ee089e08 00000000 c0718dc8 00000001
9e00: 00000000 c04ee0f0 ee7e0844 00000001 00000181 c04edb58 ee2bd320 00000000
9e20: 00000000 c011dc5c ee16a1e0 00000000 00000000 c0718dc8 ee16a1e0 ee2bd1e0
9e40: c0641740 ee16a1e0 00000000 ee2bd320 c0718dc8 ee1d3e10 ee1d3e10 00000000
9e60: c0769a88 00000000 c0718dc8 00000000 00000000 c02c3124 c02c310c ee1d3e10
9e80: c07b4eec 00000000 c0769a88 c02c1d0c ee1d3e10 c0769a88 ee1d3e44 00000000
9ea0: c07091dc c02c1eb8 00000000 c0769a88 c02c1e2c c02c0544 ee005478 ee1676c0
9ec0: c0769a88 ee3a4e80 c0760ce8 c02c150c c0669b90 c0769a88 c0746cd8 c0769a88
9ee0: c0746cd8 ee2bc4c0 c0778c00 c02c24e0 00000000 c0746cd8 c0746cd8 c07091f0
9f00: 00000000 c0008944 c04f405c 00000025 ee00b000 60000153 c074ab00 00000000
9f20: 00000000 c074ab90 60000153 00000000 ef7fca5d c050860c 000000b6 c0036b88
9f40: c065ecc4 c06bc728 00000006 00000006 c074ab30 ef7fca40 c0739bdc 00000006
9f60: c0718dbc c0778c00 000000b6 c0718dc8 c06ed598 c06edd64 00000006 00000006
9f80: c06ed598 c003b438 00000000 c04e64f4 00000000 00000000 00000000 00000000
9fa0: 00000000 c04e64fc 00000000 c000e838 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c03eef38>] (__clk_put) from [<c03f0ec8>] (of_clk_set_defaults+0xe0/0x2c0)
[<c03f0ec8>] (of_clk_set_defaults) from [<c02c3124>] (platform_drv_probe+0x18/0xa4)
[<c02c3124>] (platform_drv_probe) from [<c02c1d0c>] (driver_probe_device+0x10c/0x22c)
[<c02c1d0c>] (driver_probe_device) from [<c02c1eb8>] (__driver_attach+0x8c/0x90)
[<c02c1eb8>] (__driver_attach) from [<c02c0544>] (bus_for_each_dev+0x54/0x88)
[<c02c0544>] (bus_for_each_dev) from [<c02c150c>] (bus_add_driver+0xd4/0x1d0)
[<c02c150c>] (bus_add_driver) from [<c02c24e0>] (driver_register+0x78/0xf4)
[<c02c24e0>] (driver_register) from [<c07091f0>] (fimc_md_init+0x14/0x30)
[<c07091f0>] (fimc_md_init) from [<c0008944>] (do_one_initcall+0x80/0x1d0)
[<c0008944>] (do_one_initcall) from [<c06edd64>] (kernel_init_freeable+0x108/0x1d4)
[<c06edd64>] (kernel_init_freeable) from [<c04e64fc>] (kernel_init+0x8/0xec)
[<c04e64fc>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
Code: ebfff4ae e5943014 e5942018 e3530000 (e5823000)
Let's create a per-user handle here so that clk_put() can
properly unlink it and free the handle. Now that we allocate a
clk structure here we need to free it if __clk_get() fails so
bury the __clk_get() call in __of_clk_get_from_provider(). We
need to handle the same problem in clk_get_sys() so export
__clk_free_clk() to clkdev.c and do the same thing, except let's
use a union to make this code #ifdef free.
This fixes the above crash, properly calls __clk_get() when
of_clk_get_from_provider() is called, and cleans up the clk
structure on the error path of clk_get_sys().
Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances"
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Alban Browaeys <prahal@yahoo.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk.c | 18 ++++++++++++----
drivers/clk/clk.h | 19 ++++++++++++++++-
drivers/clk/clkdev.c | 59 ++++++++++++++++++++++++----------------------------
3 files changed, 59 insertions(+), 37 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 113456030d66..5469d7714f5d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2382,7 +2382,7 @@ struct clk *__clk_create_clk(struct clk_hw *hw, const char *dev_id,
return clk;
}
-static void __clk_free_clk(struct clk *clk)
+void __clk_free_clk(struct clk *clk)
{
clk_prepare_lock();
hlist_del(&clk->child_node);
@@ -2894,7 +2894,8 @@ void of_clk_del_provider(struct device_node *np)
}
EXPORT_SYMBOL_GPL(of_clk_del_provider);
-struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec)
+struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec,
+ const char *dev_id, const char *con_id)
{
struct of_clk_provider *provider;
struct clk *clk = ERR_PTR(-EPROBE_DEFER);
@@ -2903,8 +2904,17 @@ struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec)
list_for_each_entry(provider, &of_clk_providers, link) {
if (provider->node == clkspec->np)
clk = provider->get(clkspec, provider->data);
- if (!IS_ERR(clk))
+ if (!IS_ERR(clk)) {
+ clk = __clk_create_clk(__clk_get_hw(clk), dev_id,
+ con_id);
+
+ if (!IS_ERR(clk) && !__clk_get(clk)) {
+ __clk_free_clk(clk);
+ clk = ERR_PTR(-ENOENT);
+ }
+
break;
+ }
}
return clk;
@@ -2915,7 +2925,7 @@ struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
struct clk *clk;
mutex_lock(&of_clk_mutex);
- clk = __of_clk_get_from_provider(clkspec);
+ clk = __of_clk_get_from_provider(clkspec, NULL, __func__);
mutex_unlock(&of_clk_mutex);
return clk;
diff --git a/drivers/clk/clk.h b/drivers/clk/clk.h
index 23c44e51df69..ba845408cc3e 100644
--- a/drivers/clk/clk.h
+++ b/drivers/clk/clk.h
@@ -13,10 +13,27 @@ struct clk_hw;
#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec);
-struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec);
+struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec,
+ const char *dev_id, const char *con_id);
void of_clk_lock(void);
void of_clk_unlock(void);
#endif
+#ifdef CONFIG_COMMON_CLK
struct clk *__clk_create_clk(struct clk_hw *hw, const char *dev_id,
const char *con_id);
+void __clk_free_clk(struct clk *clk);
+#else
+/* All these casts to avoid ifdefs in clkdev... */
+static inline struct clk *
+__clk_create_clk(struct clk_hw *hw, const char *dev_id, const char *con_id)
+{
+ return (struct clk *)hw;
+}
+static inline void __clk_free_clk(struct clk *clk) { }
+static struct clk_hw *__clk_get_hw(struct clk *clk)
+{
+ return (struct clk_hw *)clk;
+}
+
+#endif
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index 29a1ab7af4b8..043fd3633373 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -29,6 +29,20 @@ static DEFINE_MUTEX(clocks_mutex);
#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+static struct clk *__of_clk_get_by_clkspec(struct of_phandle_args *clkspec,
+ const char *dev_id, const char *con_id)
+{
+ struct clk *clk;
+
+ if (!clkspec)
+ return ERR_PTR(-EINVAL);
+
+ of_clk_lock();
+ clk = __of_clk_get_from_provider(clkspec, dev_id, con_id);
+ of_clk_unlock();
+ return clk;
+}
+
/**
* of_clk_get_by_clkspec() - Lookup a clock form a clock provider
* @clkspec: pointer to a clock specifier data structure
@@ -39,22 +53,11 @@ static DEFINE_MUTEX(clocks_mutex);
*/
struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec)
{
- struct clk *clk;
-
- if (!clkspec)
- return ERR_PTR(-EINVAL);
-
- of_clk_lock();
- clk = __of_clk_get_from_provider(clkspec);
-
- if (!IS_ERR(clk) && !__clk_get(clk))
- clk = ERR_PTR(-ENOENT);
-
- of_clk_unlock();
- return clk;
+ return __of_clk_get_by_clkspec(clkspec, NULL, __func__);
}
-static struct clk *__of_clk_get(struct device_node *np, int index)
+static struct clk *__of_clk_get(struct device_node *np, int index,
+ const char *dev_id, const char *con_id)
{
struct of_phandle_args clkspec;
struct clk *clk;
@@ -68,7 +71,7 @@ static struct clk *__of_clk_get(struct device_node *np, int index)
if (rc)
return ERR_PTR(rc);
- clk = of_clk_get_by_clkspec(&clkspec);
+ clk = __of_clk_get_by_clkspec(&clkspec, dev_id, con_id);
of_node_put(clkspec.np);
return clk;
@@ -76,12 +79,7 @@ static struct clk *__of_clk_get(struct device_node *np, int index)
struct clk *of_clk_get(struct device_node *np, int index)
{
- struct clk *clk = __of_clk_get(np, index);
-
- if (!IS_ERR(clk))
- clk = __clk_create_clk(__clk_get_hw(clk), np->full_name, NULL);
-
- return clk;
+ return __of_clk_get(np, index, np->full_name, NULL);
}
EXPORT_SYMBOL(of_clk_get);
@@ -102,12 +100,10 @@ static struct clk *__of_clk_get_by_name(struct device_node *np,
*/
if (name)
index = of_property_match_string(np, "clock-names", name);
- clk = __of_clk_get(np, index);
+ clk = __of_clk_get(np, index, dev_id, name);
if (!IS_ERR(clk)) {
- clk = __clk_create_clk(__clk_get_hw(clk), dev_id, name);
break;
- }
- else if (name && index >= 0) {
+ } else if (name && index >= 0) {
if (PTR_ERR(clk) != -EPROBE_DEFER)
pr_err("ERROR: could not get clock %s:%s(%i)\n",
np->full_name, name ? name : "", index);
@@ -209,17 +205,16 @@ struct clk *clk_get_sys(const char *dev_id, const char *con_id)
if (!cl)
goto out;
- if (!__clk_get(cl->clk)) {
+ clk = __clk_create_clk(__clk_get_hw(cl->clk), dev_id, con_id);
+ if (IS_ERR(clk))
+ goto out;
+
+ if (!__clk_get(clk)) {
+ __clk_free_clk(clk);
cl = NULL;
goto out;
}
-#if defined(CONFIG_COMMON_CLK)
- clk = __clk_create_clk(__clk_get_hw(cl->clk), dev_id, con_id);
-#else
- clk = cl->clk;
-#endif
-
out:
mutex_unlock(&clocks_mutex);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-02-06 19:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 19:42 [PATCH v2 0/3] CCF fixes/cleanup for per-user series Stephen Boyd
2015-02-06 19:42 ` Stephen Boyd [this message]
2015-02-11 3:08 ` [PATCH v2 1/3] clkdev: Always allocate a struct clk and call __clk_get() w/ CCF Mike Turquette
2015-02-06 19:42 ` [PATCH v2 2/3] clk: Rename child_node to clks_node to avoid confusion Stephen Boyd
2015-03-12 0:35 ` Stephen Boyd
2015-02-06 19:42 ` [PATCH v2 3/3] clk: Replace of_clk_get_by_clkspec() with of_clk_get_from_provider() Stephen Boyd
2015-03-12 0:35 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423251765-2947-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=alban.browaeys@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=s.nawrocki@samsung.com \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.