All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oder Chiou <oder_chiou@realtek.com>
To: broonie@kernel.org, lgirdwood@gmail.com
Cc: Oder Chiou <oder_chiou@realtek.com>,
	bardliao@realtek.com, alsa-devel@alsa-project.org,
	john.lin@realtek.com, flove@realtek.com
Subject: [PATCH v2] ASoC: rt5677: Add the chip type to distinguish the setting of the clock source
Date: Wed, 11 Feb 2015 19:18:51 +0800	[thread overview]
Message-ID: <1423653531-978-1-git-send-email-oder_chiou@realtek.com> (raw)

There is only one clock source in the rt5676, so the chip type is added to
distinguish the setting of the clock source in the VAD function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 sound/soc/codecs/rt5677.c | 28 ++++++++++++++++++++++------
 sound/soc/codecs/rt5677.h |  6 ++++++
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 5d0bb87..ab62777 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -718,11 +718,24 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on)
 			RT5677_LDO1_SEL_MASK, 0x0);
 		regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG2,
 			RT5677_PWR_LDO1, RT5677_PWR_LDO1);
-		regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK1,
-			RT5677_MCLK_SRC_MASK, RT5677_MCLK2_SRC);
-		regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2,
-			RT5677_PLL2_PR_SRC_MASK | RT5677_DSP_CLK_SRC_MASK,
-			RT5677_PLL2_PR_SRC_MCLK2 | RT5677_DSP_CLK_SRC_BYPASS);
+		switch (rt5677->type) {
+		case RT5677:
+			regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK1,
+				RT5677_MCLK_SRC_MASK, RT5677_MCLK2_SRC);
+			regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2,
+				RT5677_PLL2_PR_SRC_MASK |
+				RT5677_DSP_CLK_SRC_MASK,
+				RT5677_PLL2_PR_SRC_MCLK2 |
+				RT5677_DSP_CLK_SRC_BYPASS);
+			break;
+		case RT5676:
+			regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2,
+				RT5677_DSP_CLK_SRC_MASK,
+				RT5677_DSP_CLK_SRC_BYPASS);
+			break;
+		default:
+			break;
+		}
 		regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x07ff);
 		regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x07fd);
 		rt5677_set_dsp_mode(codec, true);
@@ -4733,7 +4746,8 @@ static const struct regmap_config rt5677_regmap = {
 };
 
 static const struct i2c_device_id rt5677_i2c_id[] = {
-	{ "rt5677", 0 },
+	{ "rt5677", RT5677 },
+	{ "rt5676", RT5676 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id);
@@ -4850,6 +4864,8 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, rt5677);
 
+	rt5677->type = id->driver_data;
+
 	if (pdata)
 		rt5677->pdata = *pdata;
 
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index c0a625f..07df96b 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1665,6 +1665,11 @@ enum {
 	RT5677_IRQ_JD3,
 };
 
+enum rt5677_type {
+	RT5677,
+	RT5676,
+};
+
 struct rt5677_priv {
 	struct snd_soc_codec *codec;
 	struct rt5677_platform_data pdata;
@@ -1681,6 +1686,7 @@ struct rt5677_priv {
 	int pll_in;
 	int pll_out;
 	int pow_ldo2; /* POW_LDO2 pin */
+	enum rt5677_type type;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip gpio_chip;
 #endif
-- 
1.8.1.1.439.g50a6b54

             reply	other threads:[~2015-02-11 11:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-11 11:18 Oder Chiou [this message]
2015-02-21 14:36 ` [PATCH v2] ASoC: rt5677: Add the chip type to distinguish the setting of the clock source Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423653531-978-1-git-send-email-oder_chiou@realtek.com \
    --to=oder_chiou@realtek.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=broonie@kernel.org \
    --cc=flove@realtek.com \
    --cc=john.lin@realtek.com \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.