From: mathieu@codeaurora.org (Mathieu Olivari)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: qcom: label all gsbi devices
Date: Tue, 24 Feb 2015 16:21:55 -0800 [thread overview]
Message-ID: <1424823716-7504-1-git-send-email-mathieu@codeaurora.org> (raw)
All IPQ806x based boards will include this file and will need a way to
identify each GSBI device. So this change is labelling them all to make
reference from board specific file easier.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index d01f618..ffa5b5e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -140,7 +140,7 @@
ranges;
status = "disabled";
- serial at 12490000 {
+ uart2: serial at 12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -150,7 +150,7 @@
status = "disabled";
};
- i2c at 124a0000 {
+ i2c2: i2c at 124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
interrupts = <0 196 0>;
@@ -175,7 +175,7 @@
ranges;
status = "disabled";
- serial at 16340000 {
+ uart4: serial at 16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
@@ -185,7 +185,7 @@
status = "disabled";
};
- i2c at 16380000 {
+ i2c4: i2c at 16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16380000 0x1000>;
interrupts = <0 153 0>;
@@ -209,7 +209,7 @@
ranges;
status = "disabled";
- serial at 1a240000 {
+ uart5: serial at 1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -219,7 +219,7 @@
status = "disabled";
};
- i2c at 1a280000 {
+ i2c5: i2c at 1a280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
@@ -232,7 +232,7 @@
#size-cells = <0>;
};
- spi at 1a280000 {
+ spi5: spi at 1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Olivari <mathieu@codeaurora.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, mathieu@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, mmcclint@codeaurora.org
Subject: [PATCH 1/2] ARM: dts: qcom: label all gsbi devices
Date: Tue, 24 Feb 2015 16:21:55 -0800 [thread overview]
Message-ID: <1424823716-7504-1-git-send-email-mathieu@codeaurora.org> (raw)
All IPQ806x based boards will include this file and will need a way to
identify each GSBI device. So this change is labelling them all to make
reference from board specific file easier.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index d01f618..ffa5b5e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -140,7 +140,7 @@
ranges;
status = "disabled";
- serial@12490000 {
+ uart2: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -150,7 +150,7 @@
status = "disabled";
};
- i2c@124a0000 {
+ i2c2: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
interrupts = <0 196 0>;
@@ -175,7 +175,7 @@
ranges;
status = "disabled";
- serial@16340000 {
+ uart4: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
@@ -185,7 +185,7 @@
status = "disabled";
};
- i2c@16380000 {
+ i2c4: i2c@16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16380000 0x1000>;
interrupts = <0 153 0>;
@@ -209,7 +209,7 @@
ranges;
status = "disabled";
- serial@1a240000 {
+ uart5: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -219,7 +219,7 @@
status = "disabled";
};
- i2c@1a280000 {
+ i2c5: i2c@1a280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
@@ -232,7 +232,7 @@
#size-cells = <0>;
};
- spi@1a280000 {
+ spi5: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
--
1.9.1
next reply other threads:[~2015-02-25 0:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 0:21 Mathieu Olivari [this message]
2015-02-25 0:21 ` [PATCH 1/2] ARM: dts: qcom: label all gsbi devices Mathieu Olivari
2015-02-25 0:21 ` [PATCH 2/2] ARM: dts: qcom: add stdout-path to AP148 Mathieu Olivari
2015-02-25 0:21 ` Mathieu Olivari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424823716-7504-1-git-send-email-mathieu@codeaurora.org \
--to=mathieu@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.