[PATCH] USB: pl2303: disable break on shutdown

[Johan Hovold <johan@kernel.org>]

Currently an enabled break state is not disabled on final close nor on
re-open and has to be disabled manually.

Fix this by disabling break on port shutdown.

Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net>
Tested-by: Jari Ruusu <jariruusu@users.sourceforge.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/pl2303.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0f872e6b2c87..829604d11f3f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define UART_OVERRUN_ERROR		0x40
 #define UART_CTS			0x80
 
+static void pl2303_set_break(struct usb_serial_port *port, bool enable);
 
 enum pl2303_type {
 	TYPE_01,	/* Type 0 and 1 (difference unknown) */
@@ -615,6 +616,7 @@ static void pl2303_close(struct usb_serial_port *port)
 {
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
+	pl2303_set_break(port, false);
 }
 
 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
 {
-	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	u16 state;
 	int result;
 
-	if (break_state == 0)
-		state = BREAK_OFF;
-	else
+	if (enable)
 		state = BREAK_ON;
+	else
+		state = BREAK_OFF;
 
 	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 			state == BREAK_OFF ? "off" : "on");
@@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	pl2303_set_break(port, state);
+}
+
 static void pl2303_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      unsigned int actual_length)
-- 
2.0.5