From: Sujith Manoharan <sujith@msujith.org>
To: linux-wireless@vger.kernel.org
Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Subject: [PATCH 3/6] ath9k: Fix MCI scheme initialization
Date: Sun, 1 Mar 2015 11:53:46 +0530 [thread overview]
Message-ID: <1425191029-13667-4-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1425191029-13667-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Commit "ath9k_hw: remove ATH_BTCOEX_CFG_MCI" removed
MCI as a separate coex scheme, but we need it to
avoid fiddling with GPIO registers during
ath9k_init_btcoex() that are meant only for 3-wire
cards.
Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/btcoex.c | 40 ++++++++++++++++++++++-----------
drivers/net/wireless/ath/ath9k/btcoex.h | 1 +
drivers/net/wireless/ath/ath9k/gpio.c | 23 ++++++++++---------
3 files changed, 40 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 3dfc2c7..78e892e 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -103,7 +103,9 @@ void ath9k_hw_btcoex_init_scheme(struct ath_hw *ah)
return;
}
- if (AR_SREV_9300_20_OR_LATER(ah)) {
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) {
+ btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
+ } else if (AR_SREV_9300_20_OR_LATER(ah)) {
btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
@@ -307,6 +309,18 @@ static void ath9k_hw_btcoex_enable_mci(struct ath_hw *ah)
btcoex->enabled = true;
}
+static void ath9k_hw_btcoex_disable_mci(struct ath_hw *ah)
+{
+ struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+ int i;
+
+ ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
+
+ for (i = 0; i < AR9300_NUM_BT_WEIGHTS; i++)
+ REG_WRITE(ah, AR_MCI_COEX_WL_WEIGHTS(i),
+ btcoex_hw->wlan_weight[i]);
+}
+
void ath9k_hw_btcoex_enable(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
@@ -318,17 +332,18 @@ void ath9k_hw_btcoex_enable(struct ath_hw *ah)
ath9k_hw_btcoex_enable_2wire(ah);
break;
case ATH_BTCOEX_CFG_3WIRE:
- if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
- ath9k_hw_btcoex_enable_mci(ah);
- return;
- }
ath9k_hw_btcoex_enable_3wire(ah);
break;
+ case ATH_BTCOEX_CFG_MCI:
+ ath9k_hw_btcoex_enable_mci(ah);
+ break;
}
- REG_RMW(ah, AR_GPIO_PDPU,
- (0x2 << (btcoex_hw->btactive_gpio * 2)),
- (0x3 << (btcoex_hw->btactive_gpio * 2)));
+ if (ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_MCI) {
+ REG_RMW(ah, AR_GPIO_PDPU,
+ (0x2 << (btcoex_hw->btactive_gpio * 2)),
+ (0x3 << (btcoex_hw->btactive_gpio * 2)));
+ }
ah->btcoex_hw.enabled = true;
}
@@ -340,13 +355,12 @@ void ath9k_hw_btcoex_disable(struct ath_hw *ah)
int i;
btcoex_hw->enabled = false;
- if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
- ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
- for (i = 0; i < AR9300_NUM_BT_WEIGHTS; i++)
- REG_WRITE(ah, AR_MCI_COEX_WL_WEIGHTS(i),
- btcoex_hw->wlan_weight[i]);
+
+ if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_MCI) {
+ ath9k_hw_btcoex_disable_mci(ah);
return;
}
+
ath9k_hw_set_gpio(ah, btcoex_hw->wlanactive_gpio, 0);
ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 6de26ea..5fe62ff 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -58,6 +58,7 @@ enum ath_btcoex_scheme {
ATH_BTCOEX_CFG_NONE,
ATH_BTCOEX_CFG_2WIRE,
ATH_BTCOEX_CFG_3WIRE,
+ ATH_BTCOEX_CFG_MCI,
};
struct ath9k_hw_mci {
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 257ffce..b4a0612 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -280,6 +280,7 @@ static void ath_init_btcoex_timer(struct ath_softc *sc)
btcoex->btcoex_period / 100;
btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) *
btcoex->btcoex_period / 100;
+ btcoex->bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
(unsigned long) sc);
@@ -408,19 +409,19 @@ int ath9k_init_btcoex(struct ath_softc *sc)
case ATH_BTCOEX_CFG_3WIRE:
ath9k_hw_btcoex_init_3wire(sc->sc_ah);
ath_init_btcoex_timer(sc);
-
txq = sc->tx.txq_map[IEEE80211_AC_BE];
ath9k_hw_init_btcoex_hw(sc->sc_ah, txq->axq_qnum);
- sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
- if (ath9k_hw_mci_is_enabled(ah)) {
- sc->btcoex.duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
- INIT_LIST_HEAD(&sc->btcoex.mci.info);
- ath9k_hw_btcoex_init_mci(ah);
-
- r = ath_mci_setup(sc);
- if (r)
- return r;
- }
+ break;
+ case ATH_BTCOEX_CFG_MCI:
+ ath_init_btcoex_timer(sc);
+
+ sc->btcoex.duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
+ INIT_LIST_HEAD(&sc->btcoex.mci.info);
+ ath9k_hw_btcoex_init_mci(ah);
+
+ r = ath_mci_setup(sc);
+ if (r)
+ return r;
break;
default:
--
2.3.0
next prev parent reply other threads:[~2015-03-01 6:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-01 6:23 [PATCH 0/6] ath9k patches Sujith Manoharan
2015-03-01 6:23 ` [PATCH 1/6] ath9k: Remove useless return value check Sujith Manoharan
2015-03-03 13:47 ` [1/6] " Kalle Valo
2015-03-01 6:23 ` [PATCH 2/6] ath9k: Initialize MCI state correctly Sujith Manoharan
2015-03-01 6:23 ` Sujith Manoharan [this message]
2015-03-01 6:23 ` [PATCH 4/6] ath9k: Fix wlan-active gpio for the AR9003 family Sujith Manoharan
2015-03-01 6:23 ` [PATCH 5/6] ath9k: Handle timers for MCI Sujith Manoharan
2015-03-01 6:23 ` [PATCH 6/6] ath9k: Fix issues in the main btcoex timer Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425191029-13667-4-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rmanohar@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.