From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@linaro.org
Cc: linux-arm-msm@vger.kernel.org, georgi.djakov@linaro.org,
linux-arm-kernel@lists.infradead.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC
Date: Mon, 2 Mar 2015 12:32:29 +0530 [thread overview]
Message-ID: <1425279749-16625-7-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1425279749-16625-1-git-send-email-rnayak@codeaurora.org>
Add the GDSC instances that exist as part of apq8084 GCC block
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/gcc-apq8084.c | 38 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 6 +++++
2 files changed, 44 insertions(+)
diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
index e3ef902..ccab028 100644
--- a/drivers/clk/qcom/gcc-apq8084.c
+++ b/drivers/clk/qcom/gcc-apq8084.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
#define P_XO 0
#define P_GPLL0 1
@@ -3251,6 +3252,34 @@ static struct clk_branch gcc_usb_hsic_system_clk = {
},
};
+static struct gdsc usb_hs_hsic_gdsc = {
+ .gdscr = 0x404,
+ .pd = {
+ .name = "usb_hs_hsic",
+ },
+};
+
+static struct gdsc pcie0_gdsc = {
+ .gdscr = 0x1ac4,
+ .pd = {
+ .name = "pcie0",
+ },
+};
+
+static struct gdsc pcie1_gdsc = {
+ .gdscr = 0x1b44,
+ .pd = {
+ .name = "pcie1",
+ },
+};
+
+static struct gdsc usb30_gdsc = {
+ .gdscr = 0x1e84,
+ .pd = {
+ .name = "usb30",
+ },
+};
+
static struct clk_regmap *gcc_apq8084_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -3444,6 +3473,13 @@ static struct clk_regmap *gcc_apq8084_clocks[] = {
[GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr,
};
+static struct generic_pm_domain *gcc_apq8084_gdscs[] = {
+ [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc.pd,
+ [PCIE0_GDSC] = &pcie0_gdsc.pd,
+ [PCIE1_GDSC] = &pcie1_gdsc.pd,
+ [USB30_GDSC] = &usb30_gdsc.pd,
+};
+
static const struct qcom_reset_map gcc_apq8084_resets[] = {
[GCC_SYSTEM_NOC_BCR] = { 0x0100 },
[GCC_CONFIG_NOC_BCR] = { 0x0140 },
@@ -3552,6 +3588,8 @@ static const struct qcom_cc_desc gcc_apq8084_desc = {
.num_clks = ARRAY_SIZE(gcc_apq8084_clocks),
.resets = gcc_apq8084_resets,
.num_resets = ARRAY_SIZE(gcc_apq8084_resets),
+ .gdscs = gcc_apq8084_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_apq8084_gdscs),
};
static const struct of_device_id gcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-apq8084.h b/include/dt-bindings/clock/qcom,gcc-apq8084.h
index 2c0da56..5aa7ebe 100644
--- a/include/dt-bindings/clock/qcom,gcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h
@@ -348,4 +348,10 @@
#define GCC_PCIE_1_PIPE_CLK 331
#define GCC_PCIE_1_SLV_AXI_CLK 332
+/* gdscs */
+#define USB_HS_HSIC_GDSC 0
+#define PCIE0_GDSC 1
+#define PCIE1_GDSC 2
+#define USB30_GDSC 3
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC
Date: Mon, 2 Mar 2015 12:32:29 +0530 [thread overview]
Message-ID: <1425279749-16625-7-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1425279749-16625-1-git-send-email-rnayak@codeaurora.org>
Add the GDSC instances that exist as part of apq8084 GCC block
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/gcc-apq8084.c | 38 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 6 +++++
2 files changed, 44 insertions(+)
diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
index e3ef902..ccab028 100644
--- a/drivers/clk/qcom/gcc-apq8084.c
+++ b/drivers/clk/qcom/gcc-apq8084.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
#define P_XO 0
#define P_GPLL0 1
@@ -3251,6 +3252,34 @@ static struct clk_branch gcc_usb_hsic_system_clk = {
},
};
+static struct gdsc usb_hs_hsic_gdsc = {
+ .gdscr = 0x404,
+ .pd = {
+ .name = "usb_hs_hsic",
+ },
+};
+
+static struct gdsc pcie0_gdsc = {
+ .gdscr = 0x1ac4,
+ .pd = {
+ .name = "pcie0",
+ },
+};
+
+static struct gdsc pcie1_gdsc = {
+ .gdscr = 0x1b44,
+ .pd = {
+ .name = "pcie1",
+ },
+};
+
+static struct gdsc usb30_gdsc = {
+ .gdscr = 0x1e84,
+ .pd = {
+ .name = "usb30",
+ },
+};
+
static struct clk_regmap *gcc_apq8084_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -3444,6 +3473,13 @@ static struct clk_regmap *gcc_apq8084_clocks[] = {
[GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr,
};
+static struct generic_pm_domain *gcc_apq8084_gdscs[] = {
+ [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc.pd,
+ [PCIE0_GDSC] = &pcie0_gdsc.pd,
+ [PCIE1_GDSC] = &pcie1_gdsc.pd,
+ [USB30_GDSC] = &usb30_gdsc.pd,
+};
+
static const struct qcom_reset_map gcc_apq8084_resets[] = {
[GCC_SYSTEM_NOC_BCR] = { 0x0100 },
[GCC_CONFIG_NOC_BCR] = { 0x0140 },
@@ -3552,6 +3588,8 @@ static const struct qcom_cc_desc gcc_apq8084_desc = {
.num_clks = ARRAY_SIZE(gcc_apq8084_clocks),
.resets = gcc_apq8084_resets,
.num_resets = ARRAY_SIZE(gcc_apq8084_resets),
+ .gdscs = gcc_apq8084_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_apq8084_gdscs),
};
static const struct of_device_id gcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-apq8084.h b/include/dt-bindings/clock/qcom,gcc-apq8084.h
index 2c0da56..5aa7ebe 100644
--- a/include/dt-bindings/clock/qcom,gcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h
@@ -348,4 +348,10 @@
#define GCC_PCIE_1_PIPE_CLK 331
#define GCC_PCIE_1_SLV_AXI_CLK 332
+/* gdscs */
+#define USB_HS_HSIC_GDSC 0
+#define PCIE0_GDSC 1
+#define PCIE1_GDSC 2
+#define USB30_GDSC 3
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-03-02 7:03 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 7:02 [PATCH 0/6] Add support for QCOM GDSCs Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-02 7:02 ` [PATCH 1/6] clk: qcom: Add support for GDSCs Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-02 7:02 ` [PATCH 2/6] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-02 7:02 ` [PATCH 3/6] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-02 7:02 ` [PATCH 4/6] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-02 7:02 ` [PATCH 5/6] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak [this message]
2015-03-02 7:02 ` [PATCH 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
2015-03-05 16:55 ` [PATCH 0/6] Add support for QCOM GDSCs Stanimir Varbanov
2015-03-05 16:55 ` Stanimir Varbanov
2015-03-06 4:31 ` Rajendra Nayak
2015-03-06 4:31 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425279749-16625-7-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.