From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH i-g-t 04/13] lib/skl: Add gen9 specific igt_blitter_fast_copy()
Date: Tue, 3 Mar 2015 14:10:57 +0000 [thread overview]
Message-ID: <1425391866-15377-5-git-send-email-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <1425391866-15377-1-git-send-email-tvrtko.ursulin@linux.intel.com>
From: Damien Lespiau <damien.lespiau@intel.com>
v2: Adjust for BB handling changes. (Tvrtko Ursulin)
Correct XY_FAST_COPY_DST_TILING_Yf. (Tvrtko Ursulin)
v3: New tiling modes are not defined in the kernel any more. (Tvrtko Ursulin)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
lib/intel_batchbuffer.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++++
lib/intel_batchbuffer.h | 17 ++++++++
lib/intel_reg.h | 18 ++++++++
3 files changed, 141 insertions(+)
diff --git a/lib/intel_batchbuffer.c b/lib/intel_batchbuffer.c
index d3efc1e..9b8ae0d 100644
--- a/lib/intel_batchbuffer.c
+++ b/lib/intel_batchbuffer.c
@@ -483,6 +483,112 @@ void igt_buf_write_to_png(struct igt_buf *buf, const char *filename)
drm_intel_bo_unmap(buf->bo);
}
+/*
+ * pitches are in bytes if the surfaces are linear, number of dwords
+ * otherwise
+ */
+static uint32_t fast_copy_pitch(struct igt_buf *buf)
+{
+ if (buf->tiling != I915_TILING_NONE)
+ return buf->stride / 4;
+ else
+ return buf->stride;
+}
+
+/**
+ * igt_blitter_fast_copy:
+ * @batch: batchbuffer object
+ * @context: libdrm hardware context to use
+ * @src: source i-g-t buffer object
+ * @src_x: source pixel x-coordination
+ * @src_y: source pixel y-coordination
+ * @width: width of the copied rectangle
+ * @height: height of the copied rectangle
+ * @dst: destination i-g-t buffer object
+ * @dst_x: destination pixel x-coordination
+ * @dst_y: destination pixel y-coordination
+ *
+ * Copy @src into @dst using the gen9 fast copy blitter comamnd.
+ *
+ * The source and destination surfaces cannot overlap.
+ */
+void igt_blitter_fast_copy(struct intel_batchbuffer *batch,
+ struct igt_buf *src, unsigned src_x, unsigned src_y,
+ unsigned width, unsigned height,
+ struct igt_buf *dst, unsigned dst_x, unsigned dst_y)
+{
+ uint32_t src_pitch, dst_pitch;
+ uint32_t dword0 = 0, dword1 = 0;
+
+ src_pitch = fast_copy_pitch(src);
+ dst_pitch = fast_copy_pitch(dst);
+
+#define CHECK_RANGE(x) ((x) >= 0 && (x) < (1 << 15))
+ assert(CHECK_RANGE(src_x) && CHECK_RANGE(src_y) &&
+ CHECK_RANGE(dst_x) && CHECK_RANGE(dst_y) &&
+ CHECK_RANGE(width) && CHECK_RANGE(height) &&
+ CHECK_RANGE(src_x + width) && CHECK_RANGE(src_y + height) &&
+ CHECK_RANGE(dst_x + width) && CHECK_RANGE(dst_y + height) &&
+ CHECK_RANGE(src_pitch) && CHECK_RANGE(dst_pitch));
+#undef CHECK_RANGE
+
+ dword0 |= XY_FAST_COPY_BLT;
+
+ switch (src->tiling) {
+ case I915_TILING_X:
+ dword0 |= XY_FAST_COPY_SRC_TILING_X;
+ break;
+ case I915_TILING_Y:
+ case I915_TILING_Yf:
+ dword0 |= XY_FAST_COPY_SRC_TILING_Yb_Yf;
+ break;
+ case I915_TILING_Ys:
+ dword0 |= XY_FAST_COPY_SRC_TILING_Ys;
+ break;
+ case I915_TILING_NONE:
+ default:
+ break;
+ }
+
+ switch (dst->tiling) {
+ case I915_TILING_X:
+ dword0 |= XY_FAST_COPY_DST_TILING_X;
+ break;
+ case I915_TILING_Y:
+ case I915_TILING_Yf:
+ dword0 |= XY_FAST_COPY_DST_TILING_Yb_Yf;
+ break;
+ case I915_TILING_Ys:
+ dword0 |= XY_FAST_COPY_DST_TILING_Ys;
+ break;
+ case I915_TILING_NONE:
+ default:
+ break;
+ }
+
+ if (src->tiling == I915_TILING_Yf)
+ dword1 |= XY_FAST_COPY_SRC_TILING_Yf;
+ if (dst->tiling == I915_TILING_Yf)
+ dword1 |= XY_FAST_COPY_DST_TILING_Yf;
+
+ dword1 |= XY_FAST_COPY_COLOR_DEPTH_32;
+
+ BEGIN_BATCH(10, 2);
+ OUT_BATCH(dword0);
+ OUT_BATCH(dword1 | dst_pitch);
+ OUT_BATCH((dst_y << 16) | dst_x); /* dst x1,y1 */
+ OUT_BATCH(((dst_y + height) << 16) | (dst_x + width)); /* dst x2,y2 */
+ OUT_RELOC(dst->bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0);
+ OUT_BATCH(0); /* dst address upper bits */
+ OUT_BATCH((src_y << 16) | src_x); /* src x1,y1 */
+ OUT_BATCH(src_pitch);
+ OUT_RELOC(src->bo, I915_GEM_DOMAIN_RENDER, 0, 0);
+ OUT_BATCH(0); /* src address upper bits */
+ ADVANCE_BATCH();
+
+ intel_batchbuffer_flush(batch);
+}
+
/**
* igt_get_render_copyfunc:
* @devid: pci device id
diff --git a/lib/intel_batchbuffer.h b/lib/intel_batchbuffer.h
index e2afc3b..0f22cd6 100644
--- a/lib/intel_batchbuffer.h
+++ b/lib/intel_batchbuffer.h
@@ -186,6 +186,18 @@ void intel_copy_bo(struct intel_batchbuffer *batch,
long int size);
/**
+ * Yf/Ys tiling
+ *
+ * Tiling mode in the I915_TILING_... namespace for new tiling modes which are
+ * defined in the kernel. (They are not fenceable so the kernel does not need
+ * to know about them.)
+ *
+ * They are to be used the the blitting routines below.
+ */
+#define I915_TILING_Yf 3
+#define I915_TILING_Ys 4
+
+/**
* igt_buf:
* @bo: underlying libdrm buffer object
* @stride: stride of the buffer
@@ -212,6 +224,11 @@ unsigned igt_buf_height(struct igt_buf *buf);
void igt_buf_write_to_png(struct igt_buf *buf, const char *filename);
+void igt_blitter_fast_copy(struct intel_batchbuffer *batch,
+ struct igt_buf *src, unsigned src_x, unsigned src_y,
+ unsigned width, unsigned height,
+ struct igt_buf *dst, unsigned dst_x, unsigned dst_y);
+
/**
* igt_render_copyfunc_t:
* @batch: batchbuffer object
diff --git a/lib/intel_reg.h b/lib/intel_reg.h
index ade1c0c..0ffa803 100644
--- a/lib/intel_reg.h
+++ b/lib/intel_reg.h
@@ -2514,6 +2514,24 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define XY_MONO_SRC_BLT_WRITE_ALPHA (1<<21)
#define XY_MONO_SRC_BLT_WRITE_RGB (1<<20)
+#define XY_FAST_COPY_BLT ((2<<29)|(0x42<<22)|0x8)
+/* dword 0 */
+#define XY_FAST_COPY_SRC_TILING_LINEAR (0 << 20)
+#define XY_FAST_COPY_SRC_TILING_X (1 << 20)
+#define XY_FAST_COPY_SRC_TILING_Yb_Yf (2 << 20)
+#define XY_FAST_COPY_SRC_TILING_Ys (3 << 20)
+#define XY_FAST_COPY_SRC_HORIZONTAL_ALIGNMENT(n) (n << 17)
+#define XY_FAST_COPY_SRC_VERTICAL_ALIGNMENT(n) (n << 15)
+#define XY_FAST_COPY_DST_TILING_X (1 << 13)
+#define XY_FAST_COPY_DST_TILING_Yb_Yf (2 << 13)
+#define XY_FAST_COPY_DST_TILING_Ys (3 << 13)
+#define XY_FAST_COPY_DST_HORIZONTAL_ALIGNMENT(n) (n << 10)
+#define XY_FAST_COPY_DST_VERTICAL_ALIGNMENT(n) (n << 8)
+/* dword 1 */
+#define XY_FAST_COPY_SRC_TILING_Yf (1 << 31)
+#define XY_FAST_COPY_DST_TILING_Yf (1 << 30)
+#define XY_FAST_COPY_COLOR_DEPTH_32 (3 << 24)
+
#define MI_STORE_DWORD_IMM ((0x20<<23)|2)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
--
2.3.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-03-03 14:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 14:10 [PATCH i-g-t v3 00/13] Testing the Y tiled display Tvrtko Ursulin
2015-03-03 14:10 ` [PATCH i-g-t 01/13] tests/kms_addfb: Add support for fb modifiers Tvrtko Ursulin
2015-03-03 14:10 ` [PATCH i-g-t 02/13] lib: Extract igt_buf_write_to_png() from gem_render_copy Tvrtko Ursulin
2015-03-03 16:03 ` Tvrtko Ursulin
2015-03-03 16:12 ` Gore, Tim
2015-03-03 14:10 ` [PATCH i-g-t 03/13] tests/kms_addfb: Y tiled testcases Tvrtko Ursulin
2015-03-03 14:10 ` Tvrtko Ursulin [this message]
2015-03-03 14:10 ` [PATCH i-g-t 05/13] lib: Don't give a struct igt_buf * to fast_copy_pitch() Tvrtko Ursulin
2015-03-03 14:10 ` [PATCH i-g-t 06/13] lib: Split two helpers to build fast copy's dword0 and dword1 Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 07/13] lib: Provide a raw version of the gen9 fast copy blits Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 08/13] tiling: Convert framebuffer helpers to use fb modifiers Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 09/13] lib: Add support for new extension to the ADDFB2 ioctl Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 10/13] lib/igt_fb: Use new ADDFB2 extension for new tiling modes Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 11/13] lib: Allow the creation of Ys/Yf tiled FBs Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 12/13] testdisplay/skl: Add command line options for Yb/Yf tiled fbs Tvrtko Ursulin
2015-03-03 14:11 ` [PATCH i-g-t 13/13] tests/kms_flip_tiling: Exercise Y tiling modes on Gen9+ Tvrtko Ursulin
2015-03-12 14:36 ` [PATCH i-g-t v3 00/13] Testing the Y tiled display Damien Lespiau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425391866-15377-5-git-send-email-tvrtko.ursulin@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.