From: Ray Jui <rjui@broadcom.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Grant Likely <grant.likely@linaro.org>,
Christian Daudt <bcm@fixthebug.org>,
Matt Porter <mporter@linaro.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Russell King <linux@arm.linux.org.uk>,
Arnd Bergmann <arnd@arndb.de>
Cc: Scott Branden <sbranden@broadcom.com>,
Dmitry Torokhov <dtor@google.com>,
Anatol Pomazau <anatol@google.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>
Subject: [PATCH v5 8/8] ARM: dts: cygnus: enable GPIO based hook detection
Date: Wed, 4 Mar 2015 16:35:56 -0800 [thread overview]
Message-ID: <1425515756-321-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1425515756-321-1-git-send-email-rjui@broadcom.com>
This enables GPIO based phone hook detection for Broadcom BCM911360
phone factor board (bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index d2ee952..7db4843 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -33,6 +33,7 @@
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
/ {
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
@@ -50,4 +51,16 @@
uart3: serial@18023000 {
status = "okay";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hook {
+ label = "HOOK";
+ linux,code = <KEY_O>;
+ gpios = <&gpio_asiu 48 0>;
+ };
+ };
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: rjui@broadcom.com (Ray Jui)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 8/8] ARM: dts: cygnus: enable GPIO based hook detection
Date: Wed, 4 Mar 2015 16:35:56 -0800 [thread overview]
Message-ID: <1425515756-321-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1425515756-321-1-git-send-email-rjui@broadcom.com>
This enables GPIO based phone hook detection for Broadcom BCM911360
phone factor board (bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index d2ee952..7db4843 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -33,6 +33,7 @@
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
/ {
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
@@ -50,4 +51,16 @@
uart3: serial at 18023000 {
status = "okay";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hook {
+ label = "HOOK";
+ linux,code = <KEY_O>;
+ gpios = <&gpio_asiu 48 0>;
+ };
+ };
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Ray Jui <rjui@broadcom.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
Grant Likely <grant.likely@linaro.org>,
Christian Daudt <bcm@fixthebug.org>,
Matt Porter <mporter@linaro.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Russell King <linux@arm.linux.org.uk>,
Arnd Bergmann <arnd@arndb.de>
Cc: Scott Branden <sbranden@broadcom.com>,
Dmitry Torokhov <dtor@google.com>,
Anatol Pomazau <anatol@google.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-gpio@vger.kernel.org>,
<bcm-kernel-feedback-list@broadcom.com>,
<devicetree@vger.kernel.org>, "Ray Jui" <rjui@broadcom.com>
Subject: [PATCH v5 8/8] ARM: dts: cygnus: enable GPIO based hook detection
Date: Wed, 4 Mar 2015 16:35:56 -0800 [thread overview]
Message-ID: <1425515756-321-9-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1425515756-321-1-git-send-email-rjui@broadcom.com>
This enables GPIO based phone hook detection for Broadcom BCM911360
phone factor board (bcm911360_entphn)
Signed-off-by: Ray Jui <rjui@broadcom.com>
---
arch/arm/boot/dts/bcm911360_entphn.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index d2ee952..7db4843 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -33,6 +33,7 @@
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
/ {
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
@@ -50,4 +51,16 @@
uart3: serial@18023000 {
status = "okay";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hook {
+ label = "HOOK";
+ linux,code = <KEY_O>;
+ gpios = <&gpio_asiu 48 0>;
+ };
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2015-03-05 0:34 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-05 0:35 [PATCH v5 0/8] Add pinctrl support to Broadcom Cygnus SoC Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` [PATCH v5 1/8] pinctrl: bcm: consolidate Broadcom pinctrl drivers Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
[not found] ` <1425515756-321-2-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-03-09 16:20 ` Linus Walleij
2015-03-09 16:20 ` Linus Walleij
2015-03-09 16:20 ` Linus Walleij
[not found] ` <1425515756-321-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-03-05 0:35 ` [PATCH v5 2/8] pinctrl: Broadcom Cygnus pinctrl device tree binding Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-09 16:22 ` Linus Walleij
2015-03-09 16:22 ` Linus Walleij
2015-03-09 16:22 ` Linus Walleij
2015-03-05 0:35 ` [PATCH v5 6/8] pinctrl: cygnus: add gpio/pinconf driver Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 8:11 ` Paul Bolle
2015-03-05 8:11 ` Paul Bolle
2015-03-05 8:36 ` Paul Bolle
2015-03-05 8:36 ` Paul Bolle
2015-03-05 8:36 ` Paul Bolle
2015-03-05 17:13 ` Ray Jui
2015-03-05 17:13 ` Ray Jui
2015-03-05 17:13 ` Ray Jui
2015-03-09 16:41 ` Linus Walleij
2015-03-09 16:41 ` Linus Walleij
2015-03-09 16:41 ` Linus Walleij
2015-03-09 18:47 ` Paul Bolle
2015-03-09 18:47 ` Paul Bolle
2015-03-09 18:47 ` Paul Bolle
2015-03-05 0:35 ` [PATCH v5 3/8] pinctrl: cygnus: add initial IOMUX driver support Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 8:03 ` Paul Bolle
2015-03-05 8:03 ` Paul Bolle
2015-03-09 16:28 ` Linus Walleij
2015-03-09 16:28 ` Linus Walleij
2015-03-09 16:28 ` Linus Walleij
2015-03-09 18:40 ` Paul Bolle
2015-03-09 18:40 ` Paul Bolle
2015-03-09 18:40 ` Paul Bolle
2015-03-09 19:00 ` Ray Jui
2015-03-09 19:00 ` Ray Jui
2015-03-09 19:00 ` Ray Jui
2015-03-09 19:30 ` Paul Bolle
2015-03-09 19:30 ` Paul Bolle
2015-03-09 19:30 ` Paul Bolle
2015-03-09 19:40 ` Ray Jui
2015-03-09 19:40 ` Ray Jui
2015-03-09 19:40 ` Ray Jui
2015-03-09 19:53 ` Paul Bolle
2015-03-09 19:53 ` Paul Bolle
2015-03-09 19:53 ` Paul Bolle
2015-03-09 16:26 ` Linus Walleij
2015-03-09 16:26 ` Linus Walleij
2015-03-09 16:26 ` Linus Walleij
2015-03-05 0:35 ` [PATCH v5 4/8] ARM: dts: enable IOMUX for Broadcom Cygnus Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-09 16:29 ` Linus Walleij
2015-03-09 16:29 ` Linus Walleij
2015-03-09 16:29 ` Linus Walleij
2015-03-05 0:35 ` [PATCH v5 5/8] pinctrl: Cygnus: define Broadcom Cygnus GPIO/PINCONF binding Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-09 16:30 ` Linus Walleij
2015-03-09 16:30 ` Linus Walleij
2015-03-09 16:30 ` Linus Walleij
2015-03-09 16:41 ` Ray Jui
2015-03-09 16:41 ` Ray Jui
2015-03-09 16:41 ` Ray Jui
2015-03-05 0:35 ` [PATCH v5 7/8] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui
2015-03-05 0:35 ` Ray Jui [this message]
2015-03-05 0:35 ` [PATCH v5 8/8] ARM: dts: cygnus: enable GPIO based hook detection Ray Jui
2015-03-05 0:35 ` Ray Jui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425515756-321-9-git-send-email-rjui@broadcom.com \
--to=rjui@broadcom.com \
--cc=anatol@google.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bcm@fixthebug.org \
--cc=devicetree@vger.kernel.org \
--cc=dtor@google.com \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mporter@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.