[U-Boot] [PATCH 1/4] sunxi: video: Fix VIDEO_LCD_PANEL_I2C being enabled by default

[Ian Campbell <ijc+uboot@hellion.org.uk>]

On Sat, 2015-03-07 at 15:04 +0100, Hans de Goede wrote:
> Fix a type in board/sunxi/Kconfig which caused VIDEO_LCD_PANEL_I2C to be

"typo"

> +#define CONFIG_VIDEO_LCD_I2C_BUS	1 /* NA, but necessary to compile */

Hrm, should the usage sites not be either ifdef'd or excluded at the
Makefile level when VIDEO_LCD_PANEL_I2C is disabled?

The only use is in
                if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
                        unsigned int orig_i2c_bus = i2c_get_bus_num();
                        i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
                        i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
                        i2c_set_bus_num(orig_i2c_bus);
                }

Is the issue that the IS_ENABLED statically false but the compiler still
wants the contents to be valid?

How about a helper set_video_i2c_bus or some such which can be a nop if
CONFIG_VIDEO_LCD_I2C_BUS is not defined, which would keep the ifdef out
of this code?

Or at least #define it to some obviously bogus value (e.g. ~0UL).

Ian.