From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org, Jiri Olsa <jolsa@kernel.org>,
Corey Ashford <cjashfor@linux.vnet.ibm.com>,
David Ahern <david.ahern@oracle.com>,
Namhyung Kim <namhyung@kernel.org>,
Paul Mackerras <paulus@samba.org>,
Peter Zijlstra <peterz@infradead.org>,
Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH 08/19] perf build: Separate feature make support into config/Makefile.feature
Date: Sat, 21 Mar 2015 15:54:27 -0300 [thread overview]
Message-ID: <1426964078-16384-9-git-send-email-acme@kernel.org> (raw)
In-Reply-To: <1426964078-16384-1-git-send-email-acme@kernel.org>
From: Jiri Olsa <jolsa@kernel.org>
Move feature related code into separate makefile. The new
Makefile.feature is included from config/Makefile. It will be moved
later into tools/build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-kj76wphg05x83n6d5ff85ybx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/config/Makefile | 165 +-----------------------------------
tools/perf/config/Makefile.feature | 167 +++++++++++++++++++++++++++++++++++++
2 files changed, 168 insertions(+), 164 deletions(-)
create mode 100644 tools/perf/config/Makefile.feature
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index 81d8c2bbc4df..01278429965a 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -176,102 +176,7 @@ LDFLAGS += -Wl,-z,noexecstack
EXTLIBS = -lpthread -lrt -lm -ldl
-ifneq ($(OUTPUT),)
- OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
- $(shell mkdir -p $(OUTPUT_FEATURES))
-endif
-
-feature_check = $(eval $(feature_check_code))
-define feature_check_code
- feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
-endef
-
-feature_set = $(eval $(feature_set_code))
-define feature_set_code
- feature-$(1) := 1
-endef
-
-#
-# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
-#
-
-#
-# Note that this is not a complete list of all feature tests, just
-# those that are typically built on a fully configured system.
-#
-# [ Feature tests not mentioned here have to be built explicitly in
-# the rule that uses them - an example for that is the 'bionic'
-# feature check. ]
-#
-FEATURE_TESTS = \
- backtrace \
- dwarf \
- fortify-source \
- sync-compare-and-swap \
- glibc \
- gtk2 \
- gtk2-infobar \
- libaudit \
- libbfd \
- libelf \
- libelf-getphdrnum \
- libelf-mmap \
- libnuma \
- libperl \
- libpython \
- libpython-version \
- libslang \
- libunwind \
- pthread-attr-setaffinity-np \
- stackprotector-all \
- timerfd \
- libdw-dwarf-unwind \
- zlib
-
-FEATURE_DISPLAY = \
- dwarf \
- glibc \
- gtk2 \
- libaudit \
- libbfd \
- libelf \
- libnuma \
- libperl \
- libpython \
- libslang \
- libunwind \
- libdw-dwarf-unwind \
- zlib
-
-# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
-# If in the future we need per-feature checks/flags for features not
-# mentioned in this list we need to refactor this ;-).
-set_test_all_flags = $(eval $(set_test_all_flags_code))
-define set_test_all_flags_code
- FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1))
- FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
-endef
-
-$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
-
-#
-# Special fast-path for the 'all features are available' case:
-#
-$(call feature_check,all,$(MSG))
-
-#
-# Just in case the build freshly failed, make sure we print the
-# feature matrix:
-#
-ifeq ($(feature-all), 1)
- #
- # test-all.c passed - just set all the core feature flags to 1:
- #
- $(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
-else
- $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(FEATURE_TESTS)) >/dev/null 2>&1)
- $(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
-endif
+include $(src-perf)/config/Makefile.feature
ifeq ($(feature-stackprotector-all), 1)
CFLAGS += -fstack-protector-all
@@ -763,80 +668,12 @@ plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
endif
-#
-# Print the result of the feature test:
-#
-feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG))
-
-define feature_print_status_code
- ifeq ($(feature-$(1)), 1)
- MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
- else
- MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
- endif
-endef
-
print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef
-feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG))
-define feature_print_text_code
- MSG = $(shell printf '...%30s: %s' $(1) $(2))
-endef
-
-FEATURE_DUMP := $(foreach feat,$(FEATURE_DISPLAY),feature-$(feat)($(feature-$(feat))))
-FEATURE_DUMP_FILE := $(shell touch $(OUTPUT)FEATURE-DUMP; cat $(OUTPUT)FEATURE-DUMP)
-
-ifeq ($(dwarf-post-unwind),1)
- FEATURE_DUMP += dwarf-post-unwind($(dwarf-post-unwind-text))
-endif
-
-# The $(feature_display) controls the default detection message
-# output. It's set if:
-# - detected features differes from stored features from
-# last build (in FEATURE-DUMP file)
-# - one of the $(FEATURE_DISPLAY) is not detected
-# - VF is enabled
-
-ifneq ("$(FEATURE_DUMP)","$(FEATURE_DUMP_FILE)")
- $(shell echo "$(FEATURE_DUMP)" > $(OUTPUT)FEATURE-DUMP)
- feature_display := 1
-endif
-
-feature_display_check = $(eval $(feature_check_code))
-define feature_display_check_code
- ifneq ($(feature-$(1)), 1)
- feature_display := 1
- endif
-endef
-
-$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))
-
ifeq ($(VF),1)
- feature_display := 1
- feature_verbose := 1
-endif
-
-ifeq ($(feature_display),1)
- $(info )
- $(info Auto-detecting system features:)
- $(foreach feat,$(FEATURE_DISPLAY),$(call feature_print_status,$(feat),))
-
- ifeq ($(dwarf-post-unwind),1)
- $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
- endif
-
- ifneq ($(feature_verbose),1)
- $(info )
- endif
-endif
-
-ifeq ($(feature_verbose),1)
- TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))
- $(foreach feat,$(TMP),$(call feature_print_status,$(feat),))
- $(info )
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
diff --git a/tools/perf/config/Makefile.feature b/tools/perf/config/Makefile.feature
new file mode 100644
index 000000000000..8c98bbce6031
--- /dev/null
+++ b/tools/perf/config/Makefile.feature
@@ -0,0 +1,167 @@
+ifneq ($(OUTPUT),)
+ OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
+ $(shell mkdir -p $(OUTPUT_FEATURES))
+endif
+
+feature_check = $(eval $(feature_check_code))
+define feature_check_code
+ feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
+endef
+
+feature_set = $(eval $(feature_set_code))
+define feature_set_code
+ feature-$(1) := 1
+endef
+
+#
+# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+#
+
+#
+# Note that this is not a complete list of all feature tests, just
+# those that are typically built on a fully configured system.
+#
+# [ Feature tests not mentioned here have to be built explicitly in
+# the rule that uses them - an example for that is the 'bionic'
+# feature check. ]
+#
+FEATURE_TESTS = \
+ backtrace \
+ dwarf \
+ fortify-source \
+ sync-compare-and-swap \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-mmap \
+ libnuma \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libunwind \
+ pthread-attr-setaffinity-np \
+ stackprotector-all \
+ timerfd \
+ libdw-dwarf-unwind \
+ zlib
+
+FEATURE_DISPLAY = \
+ dwarf \
+ glibc \
+ gtk2 \
+ libaudit \
+ libbfd \
+ libelf \
+ libnuma \
+ libperl \
+ libpython \
+ libslang \
+ libunwind \
+ libdw-dwarf-unwind \
+ zlib
+
+# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
+# If in the future we need per-feature checks/flags for features not
+# mentioned in this list we need to refactor this ;-).
+set_test_all_flags = $(eval $(set_test_all_flags_code))
+define set_test_all_flags_code
+ FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1))
+ FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
+endef
+
+$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
+
+#
+# Special fast-path for the 'all features are available' case:
+#
+$(call feature_check,all,$(MSG))
+
+#
+# Just in case the build freshly failed, make sure we print the
+# feature matrix:
+#
+ifeq ($(feature-all), 1)
+ #
+ # test-all.c passed - just set all the core feature flags to 1:
+ #
+ $(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
+else
+ $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(FEATURE_TESTS)) >/dev/null 2>&1)
+ $(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
+endif
+
+#
+# Print the result of the feature test:
+#
+feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG))
+
+define feature_print_status_code
+ ifeq ($(feature-$(1)), 1)
+ MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
+ else
+ MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+ endif
+endef
+
+feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG))
+define feature_print_text_code
+ MSG = $(shell printf '...%30s: %s' $(1) $(2))
+endef
+
+FEATURE_DUMP := $(foreach feat,$(FEATURE_DISPLAY),feature-$(feat)($(feature-$(feat))))
+FEATURE_DUMP_FILE := $(shell touch $(OUTPUT)FEATURE-DUMP; cat $(OUTPUT)FEATURE-DUMP)
+
+ifeq ($(dwarf-post-unwind),1)
+ FEATURE_DUMP += dwarf-post-unwind($(dwarf-post-unwind-text))
+endif
+
+# The $(feature_display) controls the default detection message
+# output. It's set if:
+# - detected features differes from stored features from
+# last build (in FEATURE-DUMP file)
+# - one of the $(FEATURE_DISPLAY) is not detected
+# - VF is enabled
+
+ifneq ("$(FEATURE_DUMP)","$(FEATURE_DUMP_FILE)")
+ $(shell echo "$(FEATURE_DUMP)" > $(OUTPUT)FEATURE-DUMP)
+ feature_display := 1
+endif
+
+feature_display_check = $(eval $(feature_check_code))
+define feature_display_check_code
+ ifneq ($(feature-$(1)), 1)
+ feature_display := 1
+ endif
+endef
+
+$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))
+
+ifeq ($(VF),1)
+ feature_display := 1
+ feature_verbose := 1
+endif
+
+ifeq ($(feature_display),1)
+ $(info )
+ $(info Auto-detecting system features:)
+ $(foreach feat,$(FEATURE_DISPLAY),$(call feature_print_status,$(feat),))
+
+ ifeq ($(dwarf-post-unwind),1)
+ $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
+ endif
+
+ ifneq ($(feature_verbose),1)
+ $(info )
+ endif
+endif
+
+ifeq ($(feature_verbose),1)
+ TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))
+ $(foreach feat,$(TMP),$(call feature_print_status,$(feat),))
+ $(info )
+endif
--
1.9.3
next prev parent reply other threads:[~2015-03-21 18:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-21 18:54 [GIT PULL 00/19] perf/core improvements and fixes Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 01/19] perf tools: Fix race in build_id_cache__add_s() Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 02/19] perf tools: Don't allow empty argument for field-separator Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 03/19] perf build: Use FEATURE-DUMP instead of PERF-FEATURES in the .gitignore file Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 04/19] perf build: Add config/feature-checks/*.output to " Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 05/19] perf probe: Fix failure to add multiple probes without debuginfo Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 06/19] perf trace: Fix summary_only option Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 07/19] perf build: Fix feature_check name clash Arnaldo Carvalho de Melo
2015-03-21 18:54 ` Arnaldo Carvalho de Melo [this message]
2015-03-21 18:54 ` [PATCH 09/19] perf build: Make features checks directory configurable Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 10/19] perf build: Move feature checks code under tools/build Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 11/19] perf trace: Handle legacy syscalls tracepoints Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 12/19] perf hists browser: Indicate which callchain entries are annotated Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 13/19] tools lib traceevent: Add destructor for format_field Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 14/19] tools build: Add feature check for lzma library Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 15/19] perf tools: Add lzma decompression support for kernel module Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 16/19] perf tools: Add kmod_path__parse function Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 17/19] perf tools: Add dsos__addnew function Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 18/19] perf tools: Add machine__module_dso function Arnaldo Carvalho de Melo
2015-03-21 18:54 ` [PATCH 19/19] perf tools: Use kmod_path__parse for machine__new_dso Arnaldo Carvalho de Melo
2015-03-22 9:58 ` [GIT PULL 00/19] perf/core improvements and fixes Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426964078-16384-9-git-send-email-acme@kernel.org \
--to=acme@kernel.org \
--cc=acme@redhat.com \
--cc=cjashfor@linux.vnet.ibm.com \
--cc=david.ahern@oracle.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=namhyung@kernel.org \
--cc=paulus@samba.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.