From: Jiang Liu <jiang.liu@linux.intel.com>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
Lv Zheng <lv.zheng@intel.com>,
LKML <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [RFC 6/7] x86/PCI/ACPI: Use common interface to support PCI host bridge
Date: Tue, 7 Apr 2015 12:31:11 +0800 [thread overview]
Message-ID: <1428381072-27486-7-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1428381072-27486-1-git-send-email-jiang.liu@linux.intel.com>
Use common interface to simplify ACPI PCI host bridge implementation.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
arch/x86/pci/acpi.c | 281 +++++++++++++--------------------------------------
1 file changed, 72 insertions(+), 209 deletions(-)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index e7f35dc84801..b52a4d96bc89 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -4,13 +4,12 @@
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/pci-acpi.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct pci_root_info {
- struct acpi_device *bridge;
- char name[16];
- struct pci_controller sd;
+ struct acpi_pci_root_info_common common;
#ifdef CONFIG_PCI_MMCONFIG
bool mcfg_added;
u16 segment;
@@ -165,14 +164,17 @@ static int check_segment(u16 seg, struct device *dev, char *estr)
return 0;
}
-static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
- u8 end, phys_addr_t addr)
+static int setup_mcfg_map(struct acpi_pci_root_info_common *ci)
{
int result;
- struct device *dev = &info->bridge->dev;
+ struct pci_root_info *info;
+ struct acpi_pci_root *root = ci->root;
+ struct device *dev = &ci->bridge->dev;
+ int seg = ci->controller.segment;
- info->start_bus = start;
- info->end_bus = end;
+ info = container_of(ci, struct pci_root_info, common);
+ info->start_bus = (u8)root->secondary.start;
+ info->end_bus = (u8)root->secondary.end;
info->mcfg_added = false;
/* return success if MMCFG is not in use */
@@ -182,7 +184,8 @@ static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
if (!(pci_probe & PCI_PROBE_MMCONF))
return check_segment(seg, dev, "MMCONFIG is disabled,");
- result = pci_mmconfig_insert(dev, seg, start, end, addr);
+ result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
+ root->mcfg_addr);
if (result == 0) {
/* enable MMCFG if it hasn't been enabled yet */
if (raw_pci_ext_ops == NULL)
@@ -195,8 +198,11 @@ static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
return 0;
}
-static void teardown_mcfg_map(struct pci_root_info *info)
+static void teardown_mcfg_map(struct acpi_pci_root_info_common *ci)
{
+ struct pci_root_info *info;
+
+ info = container_of(ci, struct pci_root_info, common);
if (info->mcfg_added) {
pci_mmconfig_delete(info->segment, info->start_bus,
info->end_bus);
@@ -204,170 +210,80 @@ static void teardown_mcfg_map(struct pci_root_info *info)
}
}
#else
-static int setup_mcfg_map(struct pci_root_info *info,
- u16 seg, u8 start, u8 end,
- phys_addr_t addr)
+static int setup_mcfg_map(struct acpi_pci_root_info_common *ci)
{
return 0;
}
-static void teardown_mcfg_map(struct pci_root_info *info)
+
+static void teardown_mcfg_map(struct acpi_pci_root_info_common *ci)
{
}
#endif
-static void validate_resources(struct device *dev, struct list_head *crs_res,
- unsigned long type)
+static int pci_acpi_root_get_node(struct acpi_pci_root *root)
{
- LIST_HEAD(list);
- struct resource *res1, *res2, *root = NULL;
- struct resource_entry *tmp, *entry, *entry2;
-
- BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
- root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
-
- list_splice_init(crs_res, &list);
- resource_list_for_each_entry_safe(entry, tmp, &list) {
- bool free = false;
- resource_size_t end;
-
- res1 = entry->res;
- if (!(res1->flags & type))
- goto next;
-
- /* Exclude non-addressable range or non-addressable portion */
- end = min(res1->end, root->end);
- if (end <= res1->start) {
- dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
- res1);
- free = true;
- goto next;
- } else if (res1->end != end) {
- dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
- res1, (unsigned long long)end + 1,
- (unsigned long long)res1->end);
- res1->end = end;
- }
-
- resource_list_for_each_entry(entry2, crs_res) {
- res2 = entry2->res;
- if (!(res2->flags & type))
- continue;
-
- /*
- * I don't like throwing away windows because then
- * our resources no longer match the ACPI _CRS, but
- * the kernel resource tree doesn't allow overlaps.
- */
- if (resource_overlaps(res1, res2)) {
- res2->start = min(res1->start, res2->start);
- res2->end = max(res1->end, res2->end);
- dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
- res2, res1);
- free = true;
- goto next;
- }
- }
-
-next:
- resource_list_del(entry);
- if (free)
- resource_list_free_entry(entry);
- else
- resource_list_add_tail(entry, crs_res);
+ int busnum = root->secondary.start;
+ struct acpi_device *device = root->device;
+ int node = acpi_get_node(device->handle);
+
+ if (node == NUMA_NO_NODE) {
+ node = x86_pci_root_bus_node(busnum);
+ if (node != 0 && node != NUMA_NO_NODE)
+ dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
+ node);
}
+ if (node != NUMA_NO_NODE && !node_online(node))
+ node = NUMA_NO_NODE;
+
+ return node;
}
-static void add_resources(struct pci_root_info *info,
- struct list_head *resources,
- struct list_head *crs_res)
+static int pci_acpi_root_init_info(struct acpi_pci_root_info_common *ci)
{
- struct resource_entry *entry, *tmp;
- struct resource *res, *conflict, *root = NULL;
-
- validate_resources(&info->bridge->dev, crs_res, IORESOURCE_MEM);
- validate_resources(&info->bridge->dev, crs_res, IORESOURCE_IO);
-
- resource_list_for_each_entry_safe(entry, tmp, crs_res) {
- res = entry->res;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
- else if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- else
- BUG_ON(res);
-
- conflict = insert_resource_conflict(root, res);
- if (conflict) {
- dev_info(&info->bridge->dev,
- "ignoring host bridge window %pR (conflicts with %s %pR)\n",
- res, conflict->name, conflict);
- resource_list_destroy_entry(entry);
- }
- }
+ ci->controller.node = pci_acpi_root_get_node(ci->root);
+ if (pci_ignore_seg)
+ ci->controller.segment = 0;
- list_splice_tail(crs_res, resources);
+ return setup_mcfg_map(ci);
}
-static void release_pci_root_info(struct pci_host_bridge *bridge)
+static void pci_acpi_root_release_info(struct acpi_pci_root_info_common *ci)
{
- struct resource *res;
- struct resource_entry *entry;
- struct pci_root_info *info = bridge->release_data;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- res = entry->res;
- if (res->parent &&
- (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
- release_resource(res);
- }
-
- teardown_mcfg_map(info);
- kfree(info);
+ teardown_mcfg_map(ci);
}
-static void probe_pci_root_info(struct pci_root_info *info,
- struct acpi_device *device,
- int busnum, int domain,
- struct list_head *list)
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info_common *ci,
+ int status)
{
- int ret;
+ struct acpi_device *device = ci->bridge;
+ int busnum = ci->root->secondary.start;
struct resource_entry *entry, *tmp;
- unsigned long res_flags;
-
- sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
- info->bridge = device;
- res_flags = IORESOURCE_IO | IORESOURCE_MEM |
- IORESOURCE_WINDOW | IORESOURCE_MEM_8AND16BIT;
- ret = acpi_dev_get_resources(device, list,
- acpi_dev_filter_resource_type_cb,
- (void *)res_flags);
- if (ret < 0)
- dev_warn(&device->dev,
- "failed to parse _CRS method, error code %d\n", ret);
- else if (ret == 0)
- dev_dbg(&device->dev,
- "no IO and memory resources present in _CRS\n");
- else
- resource_list_for_each_entry_safe(entry, tmp, list) {
- if (entry->res->flags & IORESOURCE_DISABLED)
- resource_list_destroy_entry(entry);
- else
- entry->res->name = info->name;
- }
+
+ if (pci_use_crs)
+ return status;
+
+ resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+ dev_printk(KERN_DEBUG, &device->dev,
+ "host bridge window %pR (ignored)\n", entry->res);
+ resource_list_destroy_entry(entry);
+ }
+ x86_pci_root_bus_resources(busnum, &ci->resources);
+
+ return 0;
}
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .pci_ops = &pci_root_ops,
+ .init_info = pci_acpi_root_init_info,
+ .release_info = pci_acpi_root_release_info,
+ .prepare_resources = pci_acpi_root_prepare_resources,
+};
+
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- struct acpi_device *device = root->device;
- struct pci_root_info *info;
int domain = root->segment;
int busnum = root->secondary.start;
- struct resource_entry *res_entry;
- LIST_HEAD(crs_res);
- LIST_HEAD(resources);
struct pci_bus *bus;
- struct pci_controller *sd;
- int node;
if (pci_ignore_seg)
domain = 0;
@@ -379,72 +295,22 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
return NULL;
}
- node = acpi_get_node(device->handle);
- if (node == NUMA_NO_NODE) {
- node = x86_pci_root_bus_node(busnum);
- if (node != 0 && node != NUMA_NO_NODE)
- dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
- node);
- }
-
- if (node != NUMA_NO_NODE && !node_online(node))
- node = NUMA_NO_NODE;
-
- info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
- if (!info) {
- printk(KERN_WARNING "pci_bus %04x:%02x: "
- "ignored (out of memory)\n", domain, busnum);
- return NULL;
- }
-
- sd = &info->sd;
- sd->segment = domain;
- sd->node = node;
- sd->companion = device;
-
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus has been scanned already, replace
* its bus->sysdata.
*/
- memcpy(bus->sysdata, sd, sizeof(*sd));
- kfree(info);
+ struct pci_controller sd = {
+ .segment = domain,
+ .node = pci_acpi_root_get_node(root),
+ .companion = root->device
+ };
+ memcpy(bus->sysdata, &sd, sizeof(sd));
} else {
- /* insert busn res at first */
- pci_add_resource(&resources, &root->secondary);
-
- /*
- * _CRS with no apertures is normal, so only fall back to
- * defaults or native bridge info if we're ignoring _CRS.
- */
- probe_pci_root_info(info, device, busnum, domain, &crs_res);
- if (pci_use_crs) {
- add_resources(info, &resources, &crs_res);
- } else {
- resource_list_for_each_entry(res_entry, &crs_res)
- dev_printk(KERN_DEBUG, &device->dev,
- "host bridge window %pR (ignored)\n",
- res_entry->res);
- resource_list_free(&crs_res);
- x86_pci_root_bus_resources(busnum, &resources);
- }
-
- if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
- (u8)root->secondary.end, root->mcfg_addr))
- bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
- sd, &resources);
-
- if (bus) {
- pci_scan_child_bus(bus);
- pci_set_host_bridge_release(
- to_pci_host_bridge(bus->bridge),
- release_pci_root_info, info);
- } else {
- resource_list_free(&resources);
- teardown_mcfg_map(info);
- kfree(info);
- }
+ struct pci_root_info *info;
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops,
+ sizeof(*info) - sizeof(info->common));
}
/* After the PCI-E bus has been walked and all devices discovered,
@@ -456,9 +322,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
pcie_bus_configure_settings(child);
}
- if (bus && node != NUMA_NO_NODE)
- dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
-
return bus;
}
--
1.7.10.4
next prev parent reply other threads:[~2015-04-07 4:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-07 4:31 [RFC 0/7] Consolidate common ACPI PCI host bridge code into ACPI core Jiang Liu
2015-04-07 4:31 ` [RFC 1/7] ACPI/PCI: Enhance ACPI core to support sparse IO space Jiang Liu
2015-04-07 4:31 ` [RFC 2/7] ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge Jiang Liu
2015-04-07 4:31 ` Jiang Liu
2015-04-07 4:31 ` [RFC 3/7] ia64/PCI: Use common struct resource_entry to replace struct iospace_resource Jiang Liu
2015-04-07 4:31 ` Jiang Liu
2015-04-07 4:31 ` [RFC 4/7] x86/PCI: Rename struct pci_sysdata as struct pci_controller Jiang Liu
2015-04-07 4:31 ` [RFC 5/7] PCI/ACPI: Consolidate common PCI host bridge code into ACPI core Jiang Liu
2015-04-07 4:31 ` Jiang Liu [this message]
2015-04-07 4:31 ` [RFC 7/7] ia64/PCI/ACPI: Use common interface to support PCI host bridge Jiang Liu
2015-04-07 4:31 ` Jiang Liu
2015-04-07 11:48 ` [RFC 0/7] Consolidate common ACPI PCI host bridge code into ACPI core Rafael J. Wysocki
2015-04-07 13:35 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428381072-27486-7-git-send-email-jiang.liu@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=hpa@zytor.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lv.zheng@intel.com \
--cc=mingo@redhat.com \
--cc=rjw@rjwysocki.net \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.