From: Johan Hovold <johan@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 14/23] gpio: sysfs: clean up interrupt-interface implementation
Date: Tue, 21 Apr 2015 17:42:22 +0200 [thread overview]
Message-ID: <1429630951-27082-15-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1429630951-27082-1-git-send-email-johan@kernel.org>
Store the value sysfs entry in the gpiod data rather than in a global
table accessed through an index stored in the overloaded gpio-descriptor
flag field.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/gpio/gpiolib-sysfs.c | 54 +++++++++++++++-----------------------------
drivers/gpio/gpiolib.h | 3 ---
2 files changed, 18 insertions(+), 39 deletions(-)
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index bc4f192c0aa3..8041c1728231 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -12,11 +12,9 @@
struct gpiod_data {
struct gpio_desc *desc;
+ struct kernfs_node *value_kn;
};
-static DEFINE_IDR(dirent_idr);
-
-
/* lock protects against unexport_gpio() being called while
* sysfs files are active.
*/
@@ -127,9 +125,10 @@ static DEVICE_ATTR_RW(value);
static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
{
- struct kernfs_node *value_sd = priv;
+ struct gpiod_data *data = priv;
+
+ sysfs_notify_dirent(data->value_kn);
- sysfs_notify_dirent(value_sd);
return IRQ_HANDLED;
}
@@ -137,9 +136,8 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
{
struct gpiod_data *data = dev_get_drvdata(dev);
struct gpio_desc *desc = data->desc;
- struct kernfs_node *value_sd;
unsigned long irq_flags;
- int ret, irq, id;
+ int ret, irq;
if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags)
return 0;
@@ -148,16 +146,14 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
if (irq < 0)
return -EIO;
- id = desc->flags >> ID_SHIFT;
- value_sd = idr_find(&dirent_idr, id);
- if (value_sd)
- free_irq(irq, value_sd);
+ if (data->value_kn)
+ free_irq(irq, data);
desc->flags &= ~GPIO_TRIGGER_MASK;
if (!gpio_flags) {
ret = 0;
- goto free_id;
+ goto free_kn;
}
irq_flags = IRQF_SHARED;
@@ -168,41 +164,27 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
- if (!value_sd) {
- value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
- if (!value_sd) {
+ if (!data->value_kn) {
+ data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value");
+ if (!data->value_kn) {
ret = -ENODEV;
goto err_out;
}
-
- ret = idr_alloc(&dirent_idr, value_sd, 1, 0, GFP_KERNEL);
- if (ret < 0)
- goto free_sd;
- id = ret;
-
- desc->flags &= GPIO_FLAGS_MASK;
- desc->flags |= (unsigned long)id << ID_SHIFT;
-
- if (desc->flags >> ID_SHIFT != id) {
- ret = -ERANGE;
- goto free_id;
- }
}
ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags,
- "gpiolib", value_sd);
+ "gpiolib", data);
if (ret < 0)
- goto free_id;
+ goto free_kn;
desc->flags |= gpio_flags;
return 0;
-free_id:
- idr_remove(&dirent_idr, id);
- desc->flags &= GPIO_FLAGS_MASK;
-free_sd:
- if (value_sd)
- sysfs_put(value_sd);
+free_kn:
+ if (data->value_kn) {
+ sysfs_put(data->value_kn);
+ data->value_kn = NULL;
+ }
err_out:
return ret;
}
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 69458a022c90..4deb71d2bd01 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -90,9 +90,6 @@ struct gpio_desc {
#define FLAG_SYSFS_DIR 10 /* show sysfs direction attribute */
#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
-#define ID_SHIFT 16 /* add new flags before this one */
-
-#define GPIO_FLAGS_MASK ((1 << ID_SHIFT) - 1)
#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
const char *label;
--
2.0.5
next prev parent reply other threads:[~2015-04-21 15:42 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 15:42 [PATCH 00/23] gpio: sysfs: fixes and clean ups Johan Hovold
2015-04-21 15:42 ` [PATCH 01/23] gpio: sysfs: fix memory leaks and device hotplug Johan Hovold
2015-04-29 21:44 ` Linus Walleij
2015-04-30 8:26 ` Johan Hovold
2015-04-21 15:42 ` [PATCH 02/23] gpio: clean up gpiochip_remove Johan Hovold
2015-04-21 15:42 ` [PATCH 03/23] gpio: sysfs: drop redundant lock-as-irq Johan Hovold
2015-04-29 21:48 ` Linus Walleij
2015-04-30 9:07 ` Johan Hovold
2015-04-21 15:42 ` [PATCH 04/23] gpio: sysfs: preparatory clean ups Johan Hovold
2015-04-21 15:42 ` [PATCH 05/23] gpio: sysfs: reduce gpiochip-export locking scope Johan Hovold
2015-04-21 15:42 ` [PATCH 06/23] gpio: sysfs: clean up chip class-device handling Johan Hovold
2015-04-27 3:54 ` Alexandre Courbot
2015-04-27 8:47 ` Johan Hovold
2015-04-21 15:42 ` [PATCH 07/23] gpio: sysfs: rename gpiochip registration functions Johan Hovold
2015-04-27 3:54 ` Alexandre Courbot
2015-04-27 8:27 ` Johan Hovold
2015-04-27 8:50 ` Alexandre Courbot
2015-04-27 9:05 ` Johan Hovold
2015-04-28 3:27 ` Alexandre Courbot
2015-04-28 11:12 ` Johan Hovold
2015-04-21 15:42 ` [PATCH 08/23] gpio: remove gpiod_sysfs_set_active_low Johan Hovold
2015-04-27 3:54 ` Alexandre Courbot
2015-04-27 8:16 ` Johan Hovold
2015-04-27 8:34 ` Alexandre Courbot
2015-04-21 15:42 ` [PATCH 09/23] gpio: sysfs: use DEVICE_ATTR macros Johan Hovold
2015-04-21 15:42 ` [PATCH 10/23] gpio: sysfs: release irq after class-device deregistration Johan Hovold
2015-04-21 15:42 ` [PATCH 11/23] gpio: sysfs: remove redundant export tests Johan Hovold
2015-04-21 15:42 ` [PATCH 12/23] gpio: sysfs: add gpiod class-device data Johan Hovold
2015-04-21 15:42 ` [PATCH 13/23] gpio: sysfs: remove redundant gpio-descriptor parameters Johan Hovold
2015-04-21 15:42 ` Johan Hovold [this message]
2015-04-21 15:42 ` [PATCH 15/23] gpio: sysfs: only call irq helper if needed Johan Hovold
2015-04-21 15:42 ` [PATCH 16/23] gpio: sysfs: split irq allocation and deallocation Johan Hovold
2015-04-21 15:42 ` [PATCH 17/23] gpio: sysfs: clean up edge_store Johan Hovold
2015-04-21 15:42 ` [PATCH 18/23] gpio: sysfs: clean up gpiod_export_link locking Johan Hovold
2015-04-21 15:42 ` [PATCH 19/23] gpio: sysfs: use per-gpio locking Johan Hovold
2015-04-21 15:42 ` [PATCH 20/23] gpio: sysfs: fix race between gpiod export and unexport Johan Hovold
2015-04-21 15:42 ` [PATCH 21/23] gpio: sysfs: rename active-low helper Johan Hovold
2015-04-21 15:42 ` [PATCH 22/23] gpio: sysfs: remove FLAG_SYSFS_DIR Johan Hovold
2015-04-21 15:42 ` [PATCH 23/23] gpio: sysfs: move irq trigger flags to class-device data Johan Hovold
2015-04-27 3:58 ` [PATCH 00/23] gpio: sysfs: fixes and clean ups Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429630951-27082-15-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.