All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, Alexander Aring <alex.aring@gmail.com>
Subject: [PATCH wpan-next 6/6] at86rf230: add slp_tr support to start tx
Date: Tue, 28 Apr 2015 23:22:34 +0200	[thread overview]
Message-ID: <1430256154-1813-7-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1430256154-1813-1-git-send-email-alex.aring@gmail.com>

This patch adds support for one of the slp_tr gpio use cases which
indicates the TX_START command without doing some spi bus traffic.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 drivers/net/ieee802154/at86rf230.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 6c3cf79..de2636c 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -85,6 +85,7 @@ struct at86rf230_local {
 	struct ieee802154_hw *hw;
 	struct at86rf2xx_chip_data *data;
 	struct regmap *regmap;
+	int slp_tr;
 
 	struct completion state_complete;
 	struct at86rf230_state_change state;
@@ -338,6 +339,14 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
 	return regmap_update_bits(lp->regmap, addr, mask, data << shift);
 }
 
+static inline void
+at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
+{
+	gpio_set_value(lp->slp_tr, 1);
+	udelay(1);
+	gpio_set_value(lp->slp_tr, 0);
+}
+
 static bool
 at86rf230_reg_writeable(struct device *dev, unsigned int reg)
 {
@@ -939,13 +948,18 @@ at86rf230_write_frame_complete(void *context)
 	u8 *buf = ctx->buf;
 	int rc;
 
-	buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
-	buf[1] = STATE_BUSY_TX;
 	ctx->trx.len = 2;
-	ctx->msg.complete = NULL;
-	rc = spi_async(lp->spi, &ctx->msg);
-	if (rc)
-		at86rf230_async_error(lp, ctx, rc);
+
+	if (gpio_is_valid(lp->slp_tr)) {
+		at86rf230_slp_tr_rising_edge(lp);
+	} else {
+		buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
+		buf[1] = STATE_BUSY_TX;
+		ctx->msg.complete = NULL;
+		rc = spi_async(lp->spi, &ctx->msg);
+		if (rc)
+			at86rf230_async_error(lp, ctx, rc);
+	}
 }
 
 static void
@@ -1679,6 +1693,7 @@ static int at86rf230_probe(struct spi_device *spi)
 	lp = hw->priv;
 	lp->hw = hw;
 	lp->spi = spi;
+	lp->slp_tr = slp_tr;
 	hw->parent = &spi->dev;
 	hw->vif_data_size = sizeof(*lp);
 	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
-- 
2.3.6


      parent reply	other threads:[~2015-04-28 21:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28 21:22 [PATCH wpan-next 0/6] at86rf230: cleanups and transmit improvements Alexander Aring
2015-04-28 21:22 ` [PATCH wpan-next 1/6] at86rf230: remove tabs after define Alexander Aring
2015-04-28 21:22 ` [PATCH wpan-next 2/6] at86rf230: move cal_timeout to state change Alexander Aring
2015-04-28 21:22 ` [PATCH wpan-next 3/6] at86rf230: add TX_ARET_ON for calibration timeout Alexander Aring
2015-04-28 21:22 ` [PATCH wpan-next 4/6] at86rf230: remove unnecessary tx state change Alexander Aring
2015-04-28 21:22 ` [PATCH wpan-next 5/6] at86rf230: change state change if from trx_off Alexander Aring
2015-04-29  4:05   ` Varka Bhadram
2015-04-28 21:22 ` Alexander Aring [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430256154-1813-7-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.