All of lore.kernel.org
 help / color / mirror / Atom feed
From: han.lu@intel.com
To: daniel.vetter@intel.com, tiwai@suse.de, jani.nikula@intel.com,
	libin.yang@intel.com, mengdong.lin@intel.com,
	intel-gfx@lists.freedesktop.org
Cc: "Lu, Han" <han.lu@intel.com>
Subject: [PATCH-V3 1/2] drm/i915/audio: add codec wakeup override enabled/disable callback
Date: Wed, 29 Apr 2015 17:49:25 +0800	[thread overview]
Message-ID: <1430300966-19331-1-git-send-email-han.lu@intel.com> (raw)

From: "Lu, Han" <han.lu@intel.com>

Add support for enabling codec wakeup override signal to allow
re-enumeration of the controller on SKL after resume from low power state.

v3 by Jani: Simplify to only support toggling the appropriate chicken bit.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 36805b6..435c372 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6881,6 +6881,9 @@ enum skl_disp_power_wells {
 #define   AUDIO_CP_READY(trans)		((1 << 1) << ((trans) * 4))
 #define   AUDIO_ELD_VALID(trans)	((1 << 0) << ((trans) * 4))
 
+#define HSW_AUD_CHICKENBIT			0x65f10
+#define   SKL_AUD_CODEC_WAKE_SIGNAL		(1 << 15)
+
 /* HSW Power Wells */
 #define HSW_PWR_WELL_BIOS			0x45400 /* CTL1 */
 #define HSW_PWR_WELL_DRIVER			0x45404 /* CTL2 */
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index f72e93a..ceb2328 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -474,6 +474,32 @@ static void i915_audio_component_put_power(struct device *dev)
 	intel_display_power_put(dev_to_i915(dev), POWER_DOMAIN_AUDIO);
 }
 
+static void i915_audio_component_codec_wake_override(struct device *dev,
+						     bool enable)
+{
+	struct drm_i915_private *dev_priv = dev_to_i915(dev);
+	u32 tmp;
+
+	if (!IS_SKYLAKE(dev_priv))
+		return;
+
+	/*
+	 * Enable/disable generating the codec wake signal, overriding the
+	 * internal logic to generate the codec wake to controller.
+	 */
+	tmp = I915_READ(HSW_AUD_CHICKENBIT);
+	tmp &= ~SKL_AUD_CODEC_WAKE_SIGNAL;
+	I915_WRITE(HSW_AUD_CHICKENBIT, tmp);
+	usleep_range(1000, 1500);
+
+	if (enable) {
+		tmp = I915_READ(HSW_AUD_CHICKENBIT);
+		tmp |= SKL_AUD_CODEC_WAKE_SIGNAL;
+		I915_WRITE(HSW_AUD_CHICKENBIT, tmp);
+		usleep_range(1000, 1500);
+	}
+}
+
 /* Get CDCLK in kHz  */
 static int i915_audio_component_get_cdclk_freq(struct device *dev)
 {
@@ -495,6 +521,7 @@ static const struct i915_audio_component_ops i915_audio_component_ops = {
 	.owner		= THIS_MODULE,
 	.get_power	= i915_audio_component_get_power,
 	.put_power	= i915_audio_component_put_power,
+	.codec_wake_override = i915_audio_component_codec_wake_override,
 	.get_cdclk_freq	= i915_audio_component_get_cdclk_freq,
 };
 
diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
index 3e2f22e..c9a8b64 100644
--- a/include/drm/i915_component.h
+++ b/include/drm/i915_component.h
@@ -31,6 +31,7 @@ struct i915_audio_component {
 		struct module *owner;
 		void (*get_power)(struct device *);
 		void (*put_power)(struct device *);
+		void (*codec_wake_override)(struct device *, bool enable);
 		int (*get_cdclk_freq)(struct device *);
 	} *ops;
 };
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2015-04-29  9:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-29  9:49 han.lu [this message]
2015-04-29  9:49 ` [PATCH-V3 2/2] ALSA:hda - reset display codec when power on han.lu
2015-04-30 18:29   ` shuang.he
2015-04-30 14:21 ` [PATCH-V3 1/2] drm/i915/audio: add codec wakeup override enabled/disable callback Takashi Iwai
2015-05-04  0:32   ` Lu, Han
2015-05-04  7:49     ` Jani Nikula
2015-05-04  7:51       ` Yang, Libin
2015-05-04 12:28       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430300966-19331-1-git-send-email-han.lu@intel.com \
    --to=han.lu@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=libin.yang@intel.com \
    --cc=mengdong.lin@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.