From: <gregkh@linuxfoundation.org>
To: markos.chandras@imgtec.com, ralf@linux-mips.org, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] MIPS: unaligned: Surround load/store macros in do {} while" failed to apply to 3.19-stable tree
Date: Sat, 02 May 2015 14:18:39 +0200 [thread overview]
Message-ID: <143056911973148@kroah.com> (raw)
The patch below does not apply to the 3.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 3563c32d6532ece53c9dd8905a8e41983ef9952f Mon Sep 17 00:00:00 2001
From: Markos Chandras <markos.chandras@imgtec.com>
Date: Mon, 9 Mar 2015 14:54:51 +0000
Subject: [PATCH] MIPS: unaligned: Surround load/store macros in do {} while
statements
It's best to surround such complex macros with do {} while statements
so they can appear as independent logical blocks when used within other
control blocks.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 7a5707eea898..ab475903175f 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -110,6 +110,7 @@ extern void show_registers(struct pt_regs *regs);
#ifdef __BIG_ENDIAN
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "0(%2)")"\n" \
"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
@@ -127,10 +128,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -146,10 +149,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -178,10 +184,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "0(%2)")"\n" \
@@ -201,10 +210,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -222,9 +233,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
@@ -240,10 +253,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -272,9 +288,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -319,11 +337,14 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "1(%2)")"\n" \
@@ -342,10 +363,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "(%2)")"\n" \
"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
@@ -361,9 +384,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
@@ -379,10 +404,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -409,9 +437,11 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -451,12 +481,15 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#else /* __BIG_ENDIAN */
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "1(%2)")"\n" \
"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
@@ -474,10 +507,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -493,10 +528,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -525,11 +563,14 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "1(%2)")"\n" \
@@ -549,10 +590,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -570,9 +613,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
@@ -588,10 +633,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -620,9 +668,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -667,10 +717,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "0(%2)")"\n" \
@@ -689,9 +741,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "3(%2)")"\n" \
"2:\t"type##_swr("%1", "(%2)")"\n\t"\
@@ -707,9 +762,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
@@ -725,10 +782,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -755,9 +815,11 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -797,7 +859,9 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#endif
reply other threads:[~2015-05-02 12:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=143056911973148@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=markos.chandras@imgtec.com \
--cc=ralf@linux-mips.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.