From: <gregkh@linuxfoundation.org>
To: ulrik.debie-os@e2big.org, dmitry.torokhov@gmail.com,
gmoutso@yahoo.co.uk, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Input: elantech - fix absolute mode setting on some ASUS laptops" has been added to the 3.10-stable tree
Date: Sat, 02 May 2015 16:20:56 +0200 [thread overview]
Message-ID: <143057645671109@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Input: elantech - fix absolute mode setting on some ASUS laptops
to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
input-elantech-fix-absolute-mode-setting-on-some-asus-laptops.patch
and it can be found in the queue-3.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From bd884149aca61de269fd9bad83fe2a4232ffab21 Mon Sep 17 00:00:00 2001
From: Ulrik De Bie <ulrik.debie-os@e2big.org>
Date: Mon, 6 Apr 2015 15:35:38 -0700
Subject: Input: elantech - fix absolute mode setting on some ASUS laptops
From: Ulrik De Bie <ulrik.debie-os@e2big.org>
commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.
In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).
Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c
Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++
drivers/input/mouse/elantech.h | 1 +
2 files changed, 23 insertions(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -784,6 +784,21 @@ static psmouse_ret_t elantech_process_by
}
/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
+/*
* Put the touchpad into absolute mode
*/
static int elantech_set_absolute_mode(struct psmouse *psmouse)
@@ -985,6 +1000,8 @@ static int elantech_get_resolution_v4(st
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
@@ -1452,6 +1469,11 @@ int elantech_init(struct psmouse *psmous
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -138,6 +138,7 @@ struct elantech_data {
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+ void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
Patches currently in stable-queue which might be from ulrik.debie-os@e2big.org are
queue-3.10/input-elantech-fix-absolute-mode-setting-on-some-asus-laptops.patch
reply other threads:[~2015-05-02 14:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=143057645671109@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gmoutso@yahoo.co.uk \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulrik.debie-os@e2big.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.