From: <gregkh@linuxfoundation.org>
To: akinobu.mita@gmail.com, James.Bottomley@HansenPartnership.com,
gregkh@linuxfoundation.org, hch@lst.de,
martin.petersen@oracle.com, nab@linux-iscsi.org,
sagig@mellanox.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "target/file: Fix SG table for prot_buf initialization" has been added to the 3.19-stable tree
Date: Sat, 02 May 2015 18:55:52 +0200 [thread overview]
Message-ID: <143058575261126@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
target/file: Fix SG table for prot_buf initialization
to the 3.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
target-file-fix-sg-table-for-prot_buf-initialization.patch
and it can be found in the queue-3.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From c836777830428372074d5129ac513e1472c99791 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Mon, 13 Apr 2015 23:21:57 +0900
Subject: target/file: Fix SG table for prot_buf initialization
From: Akinobu Mita <akinobu.mita@gmail.com>
commit c836777830428372074d5129ac513e1472c99791 upstream.
In fd_do_prot_rw(), it allocates prot_buf which is used to copy from
se_cmd->t_prot_sg by sbc_dif_copy_prot(). The SG table for prot_buf
is also initialized by allocating 'se_cmd->t_prot_nents' entries of
scatterlist and setting the data length of each entry to PAGE_SIZE
at most.
However if se_cmd->t_prot_sg contains a clustered entry (i.e.
sg->length > PAGE_SIZE), the SG table for prot_buf can't be
initialized correctly and sbc_dif_copy_prot() can't copy to prot_buf.
(This actually happened with TCM loopback fabric module)
As prot_buf is allocated by kzalloc() and it's physically contiguous,
we only need a single scatterlist entry.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_file.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -264,11 +264,10 @@ static int fd_do_prot_rw(struct se_cmd *
struct se_device *se_dev = cmd->se_dev;
struct fd_dev *dev = FD_DEV(se_dev);
struct file *prot_fd = dev->fd_prot_file;
- struct scatterlist *sg;
loff_t pos = (cmd->t_task_lba * se_dev->prot_length);
unsigned char *buf;
- u32 prot_size, len, size;
- int rc, ret = 1, i;
+ u32 prot_size;
+ int rc, ret = 1;
prot_size = (cmd->data_length / se_dev->dev_attrib.block_size) *
se_dev->prot_length;
@@ -281,24 +280,16 @@ static int fd_do_prot_rw(struct se_cmd *
}
buf = fd_prot->prot_buf;
- fd_prot->prot_sg_nents = cmd->t_prot_nents;
- fd_prot->prot_sg = kzalloc(sizeof(struct scatterlist) *
- fd_prot->prot_sg_nents, GFP_KERNEL);
+ fd_prot->prot_sg_nents = 1;
+ fd_prot->prot_sg = kzalloc(sizeof(struct scatterlist),
+ GFP_KERNEL);
if (!fd_prot->prot_sg) {
pr_err("Unable to allocate fd_prot->prot_sg\n");
kfree(fd_prot->prot_buf);
return -ENOMEM;
}
sg_init_table(fd_prot->prot_sg, fd_prot->prot_sg_nents);
- size = prot_size;
-
- for_each_sg(fd_prot->prot_sg, sg, fd_prot->prot_sg_nents, i) {
-
- len = min_t(u32, PAGE_SIZE, size);
- sg_set_buf(sg, buf, len);
- size -= len;
- buf += len;
- }
+ sg_set_buf(fd_prot->prot_sg, buf, prot_size);
}
if (is_write) {
Patches currently in stable-queue which might be from akinobu.mita@gmail.com are
queue-3.19/target-file-fix-bug-when-config_debug_sg-y-and-dif-protection-enabled.patch
queue-3.19/target-file-fix-unmap-with-dif-protection-support.patch
queue-3.19/target-file-fix-sg-table-for-prot_buf-initialization.patch
reply other threads:[~2015-05-02 16:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=143058575261126@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=akinobu.mita@gmail.com \
--cc=hch@lst.de \
--cc=martin.petersen@oracle.com \
--cc=nab@linux-iscsi.org \
--cc=sagig@mellanox.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.