diff for duplicates of <1430881593.5148.0.camel@intel.com> diff --git a/a/1.txt b/N1/1.txt index 28a5ab2..b9752f9 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -11,9 +11,3 @@ I think that may make some user confused. Thanks, Ying Huang - - - -_______________________________________________ -LKP mailing list -LKP(a)linux.intel.com diff --git a/a/2.hdr b/N1/2.hdr index 6e2b581..d0ae231 100644 --- a/a/2.hdr +++ b/N1/2.hdr @@ -1,4 +1,3 @@ -Content-Type: text/plain -MIME-Version: 1.0 -Content-Transfer-Encoding: base64 +Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="config-3.9.0-rc3-00755-gc544193" +Content-Transfer-Encoding: 7bit diff --git a/a/3.hdr b/N1/3.hdr index e4adcbc..18d6893 100644 --- a/a/3.hdr +++ b/N1/3.hdr @@ -1,4 +1,4 @@ -Content-Type: text/plain +Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 -Content-Transfer-Encoding: base64 -Content-Disposition: attachment; filename="dmesg.ksh" +Content-Disposition: inline +Content-Transfer-Encoding: 7bit diff --git a/a/3.txt b/N1/3.txt index 6c4e725..c1c88a7 100644 --- a/a/3.txt +++ b/N1/3.txt @@ -1,768 +1,3 @@ -early console in setup code -Probing EDD (edd=off to disable)... ok -[ 0.000000] Initializing cgroup subsys cpu -[ 0.000000] Linux version 3.9.0-rc3-00755-gc544193 (kbuild@lkp-nex05) (gcc version 4.9.2 (Debian 4.9.2-10) ) #34 SMP Sun May 3 12:17:20 CST 2015 -[ 0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drbd.minor -[ 0.000000] KERNEL supported cpus: -[ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. -[ 0.000000] CPU: Your system may be unstable. -[ 0.000000] e820: BIOS-provided physical RAM map: -[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable -[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved -[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved -[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable -[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved -[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved -[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved -[ 0.000000] NX (Execute Disable) protection: active -[ 0.000000] SMBIOS 2.8 present. -[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 -[ 0.000000] Hypervisor detected: KVM -[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved -[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable -[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x400000000 -[ 0.000000] MTRR default type: write-back -[ 0.000000] MTRR fixed ranges enabled: -[ 0.000000] 00000-9FFFF write-back -[ 0.000000] A0000-BFFFF uncachable -[ 0.000000] C0000-FFFFF write-protect -[ 0.000000] MTRR variable ranges enabled: -[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable -[ 0.000000] 1 disabled -[ 0.000000] 2 disabled -[ 0.000000] 3 disabled -[ 0.000000] 4 disabled -[ 0.000000] 5 disabled -[ 0.000000] 6 disabled -[ 0.000000] 7 disabled -[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 -[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] -[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] -[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] -[ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] -[ 0.000000] mpc: f0ec0-f0fa4 -[ 0.000000] Scanning 1 areas for low memory corruption -[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 -[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] -[ 0.000000] [mem 0x00000000-0x000fffff] page 4k -[ 0.000000] BRK [0x02abd000, 0x02abdfff] PGTABLE -[ 0.000000] BRK [0x02abe000, 0x02abefff] PGTABLE -[ 0.000000] BRK [0x02abf000, 0x02abffff] PGTABLE -[ 0.000000] init_memory_mapping: [mem 0x14e00000-0x14ffffff] -[ 0.000000] [mem 0x14e00000-0x14ffffff] page 2M -[ 0.000000] init_memory_mapping: [mem 0x14000000-0x14dfffff] -[ 0.000000] [mem 0x14000000-0x14dfffff] page 2M -[ 0.000000] init_memory_mapping: [mem 0x00100000-0x13ffffff] -[ 0.000000] [mem 0x00100000-0x001fffff] page 4k -[ 0.000000] [mem 0x00200000-0x13ffffff] page 2M -[ 0.000000] init_memory_mapping: [mem 0x15000000-0x167dffff] -[ 0.000000] [mem 0x15000000-0x165fffff] page 2M -[ 0.000000] [mem 0x16600000-0x167dffff] page 4k -[ 0.000000] BRK [0x02ac0000, 0x02ac0fff] PGTABLE -[ 0.000000] RAMDISK: [mem 0x1504a000-0x167d7fff] -[ 0.000000] ACPI: RSDP 00000000000f0c90 00014 (v00 BOCHS ) -[ 0.000000] ACPI: RSDT 00000000167e18bd 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) -[ 0.000000] ACPI: FACP 00000000167e0b37 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) -[ 0.000000] ACPI: DSDT 00000000167e0040 00AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) -[ 0.000000] ACPI: FACS 00000000167e0000 00040 -[ 0.000000] ACPI: SSDT 00000000167e0bab 00C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) -[ 0.000000] ACPI: APIC 00000000167e1805 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) -[ 0.000000] ACPI: HPET 00000000167e1885 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) -[ 0.000000] ACPI: Local APIC address 0xfee00000 -[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) -[ 0.000000] No NUMA configuration found -[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000167dffff] -[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x167dffff] -[ 0.000000] NODE_DATA [mem 0x1502d000-0x15049fff] -[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 -[ 0.000000] kvm-clock: cpu 0, msr 0:14fed001, boot clock -[ 0.000000] Zone ranges: -[ 0.000000] DMA32 [mem 0x00001000-0xffffffff] -[ 0.000000] Normal empty -[ 0.000000] Movable zone start for each node -[ 0.000000] Early memory node ranges -[ 0.000000] node 0: [mem 0x00001000-0x0009efff] -[ 0.000000] node 0: [mem 0x00100000-0x167dffff] -[ 0.000000] On node 0 totalpages: 92030 -[ 0.000000] DMA32 zone: 1440 pages used for memmap -[ 0.000000] DMA32 zone: 21 pages reserved -[ 0.000000] DMA32 zone: 92030 pages, LIFO batch:31 -[ 0.000000] ACPI: PM-Timer IO Port: 0x608 -[ 0.000000] ACPI: Local APIC address 0xfee00000 -[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) -[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) -[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) -[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) -[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) -[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 -[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 -[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) -[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 -[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) -[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 -[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) -[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a -[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) -[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b -[ 0.000000] ACPI: IRQ0 used by override. -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 -[ 0.000000] ACPI: IRQ2 used by override. -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 -[ 0.000000] ACPI: IRQ5 used by override. -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 -[ 0.000000] ACPI: IRQ9 used by override. -[ 0.000000] ACPI: IRQ10 used by override. -[ 0.000000] ACPI: IRQ11 used by override. -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e -[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f -[ 0.000000] Using ACPI (MADT) for SMP configuration information -[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 -[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs -[ 0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000) -[ 0.000000] nr_irqs_gsi: 40 -[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices -[ 0.000000] Booting paravirtualized kernel on KVM -[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 -[ 0.000000] PERCPU: Embedded 472 pages/cpu @ffff880014a00000 s1910528 r0 d22784 u2097152 -[ 0.000000] pcpu-alloc: s1910528 r0 d22784 u2097152 alloc=1*2097152 -[ 0.000000] pcpu-alloc: [0] 0 [0] 1 -[ 0.000000] kvm-clock: cpu 0, msr 0:14fed001, primary cpu clock -[ 0.000000] KVM setup async PF for cpu 0 -[ 0.000000] kvm-stealtime: cpu 0, msr 14a0cb40 -[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 90569 -[ 0.000000] Policy zone: DMA32 -[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drb -[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) -[ 0.000000] __ex_table already sorted, skipping sort -[ 0.000000] Memory: 305836k/368512k available (6219k kernel code, 392k absent, 62284k reserved, 7251k data, 2824k init) -[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 -[ 0.000000] Hierarchical RCU implementation. -[ 0.000000] NR_IRQS:262400 nr_irqs:512 16 -[ 0.000000] console [ttyS0] enabled -[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar -[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 -[ 0.000000] ... MAX_LOCK_DEPTH: 48 -[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 -[ 0.000000] ... CLASSHASH_SIZE: 4096 -[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 -[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 -[ 0.000000] ... CHAINHASH_SIZE: 16384 -[ 0.000000] memory used by lock dependency info: 6367 kB -[ 0.000000] per task-struct memory footprint: 2688 bytes -[ 0.000000] ODEBUG: 0 of 0 active objects replaced -[ 0.000000] hpet clockevent registered -[ 0.000000] tsc: Detected 2693.508 MHz processor -[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized -[ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508) -[ 0.003006] pid_max: default: 4096 minimum: 301 -[ 0.003552] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) -[ 0.004182] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) -[ 0.005051] Mount-cache hash table entries: 256 -[ 0.006277] Initializing cgroup subsys freezer -[ 0.006706] Initializing cgroup subsys perf_event -[ 0.007091] numa_add_cpu cpu 0 node 0: mask now 0 -[ 0.007530] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 -[ 0.007530] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 -[ 0.007530] tlb_flushall_shift: -1 -[ 0.009082] Freeing SMP alternatives: 12k freed -[ 0.010232] ACPI: Core revision 20130117 -[ 0.012351] ACPI: All ACPI Tables successfully acquired -[ 0.013120] Getting VERSION: 1050014 -[ 0.013469] Getting VERSION: 1050014 -[ 0.013806] Getting ID: 0 -[ 0.014020] Getting ID: ff000000 -[ 0.014340] Getting LVT0: 8700 -[ 0.014629] Getting LVT1: 8400 -[ 0.015048] enabled ExtINT on CPU#0 -[ 0.016129] ENABLING IO-APIC IRQs -[ 0.016450] init IO_APIC IRQs -[ 0.016727] apic 0 pin 0 not connected -[ 0.017017] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) -[ 0.017762] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) -[ 0.018023] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) -[ 0.019022] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) -[ 0.020028] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) -[ 0.020759] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) -[ 0.021022] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) -[ 0.022021] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) -[ 0.023022] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) -[ 0.024021] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) -[ 0.024793] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) -[ 0.025022] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) -[ 0.026021] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) -[ 0.027021] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) -[ 0.028021] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) -[ 0.028775] apic 0 pin 16 not connected -[ 0.029003] apic 0 pin 17 not connected -[ 0.029364] apic 0 pin 18 not connected -[ 0.029723] apic 0 pin 19 not connected -[ 0.030003] apic 0 pin 20 not connected -[ 0.030371] apic 0 pin 21 not connected -[ 0.031003] apic 0 pin 22 not connected -[ 0.031372] apic 0 pin 23 not connected -[ 0.031872] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 -[ 0.032003] smpboot: CPU0: GenuineIntel QEMU Virtual CPU version 2.1.2 (fam: 06, model: 06, stepping: 03) -[ 0.033837] Using local APIC timer interrupts. -[ 0.033837] calibrating APIC timer ... -[ 0.035000] ... lapic delta = 6249791 -[ 0.035000] ... PM-Timer delta = 357909 -[ 0.035000] ... PM-Timer result ok -[ 0.035000] ..... delta 6249791 -[ 0.035000] ..... mult: 268426479 -[ 0.035000] ..... calibration result: 999966 -[ 0.035000] ..... CPU clock speed is 2693.0162 MHz. -[ 0.035000] ..... host bus clock speed is 999.0966 MHz. -[ 0.035071] Performance Events: -[ 0.036104] SMP alternatives: lockdep: fixing up alternatives -[ 0.037015] smpboot: Booting Node 0, Processors #1 OK -[ 0.003000] kvm-clock: cpu 1, msr 0:14fed041, secondary cpu clock -[ 0.003000] masked ExtINT on CPU#1 -[ 0.003000] numa_add_cpu cpu 1 node 0: mask now 0-1 -[ 0.049962] Brought up 2 CPUs -[ 0.049926] KVM setup async PF for cpu 1 -[ 0.049926] kvm-stealtime: cpu 1, msr 14c0cb40 -[ 0.050007] ---------------- -[ 0.051002] | NMI testsuite: -[ 0.051269] -------------------- -[ 0.051558] remote IPI: ok | -[ 0.055121] local IPI: ok | -[ 0.061011] -------------------- -[ 0.061326] Good, all 2 testcases passed! | -[ 0.061719] --------------------------------- -[ 0.062004] smpboot: Total of 2 processors activated (10774.03 BogoMIPS) -[ 0.063228] devtmpfs: initialized -[ 0.067311] NET: Registered protocol family 16 -[ 0.068733] ACPI: bus type PCI registered -[ 0.069097] PCI: Using configuration type 1 for base access -[ 0.074533] ACPI: Added _OSI(Module Device) -[ 0.075005] ACPI: Added _OSI(Processor Device) -[ 0.075411] ACPI: Added _OSI(3.0 _SCP Extensions) -[ 0.076004] ACPI: Added _OSI(Processor Aggregator Device) -[ 0.078744] ACPI: EC: Look up EC in DSDT -[ 0.082536] ACPI: Interpreter enabled -[ 0.082881] ACPI: (supports S0 S5) -[ 0.083003] ACPI: Using IOAPIC for interrupt routing -[ 0.083477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug -[ 0.090780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) -[ 0.091009] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) -[ 0.092223] PCI host bridge to bus 0000:00 -[ 0.092605] pci_bus 0000:00: root bus resource [bus 00-ff] -[ 0.093004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] -[ 0.093555] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] -[ 0.094003] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] -[ 0.094551] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] -[ 0.095004] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] -[ 0.095544] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] -[ 0.096004] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff] -[ 0.097058] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 -[ 0.098091] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 -[ 0.099096] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 -[ 0.101822] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] -[ 0.103539] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 -[ 0.104347] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI -[ 0.105012] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB -[ 0.105821] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 -[ 0.107402] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] -[ 0.108855] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] -[ 0.113418] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] -[ 0.114204] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 -[ 0.115380] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff] -[ 0.117004] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] -[ 0.121005] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] -[ 0.121763] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 -[ 0.122412] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f] -[ 0.126169] ACPI _OSC control for PCIe not granted, disabling ASPM -[ 0.127753] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) -[ 0.128327] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) -[ 0.129202] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) -[ 0.129919] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) -[ 0.130254] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) -[ 0.131508] ACPI: Enabled 16 GPEs in block 00 to 0F -[ 0.132011] acpi root: \_SB_.PCI0 notify handler is installed -[ 0.132649] Found 1 acpi root devices -[ 0.133195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none -[ 0.134006] vgaarb: loaded -[ 0.134265] vgaarb: bridge control possible 0000:00:02.0 -[ 0.134774] Error: Driver '88PM80X' is already registered, aborting... -[ 0.135332] pps_core: LinuxPPS API ver. 1 registered -[ 0.136003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> -[ 0.137013] PTP clock support registered -[ 0.137392] EDAC MC: Ver: 3.0.0 -[ 0.137821] EDAC DEBUG: edac_mc_sysfs_init: device mc created -[ 0.138080] PCI: Using ACPI for IRQ routing -[ 0.138452] PCI: pci_cache_line_size set to 64 bytes -[ 0.139108] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] -[ 0.140004] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff] -[ 0.140847] NET: Registered protocol family 23 -[ 0.141044] Bluetooth: Core ver 2.16 -[ 0.141393] NET: Registered protocol family 31 -[ 0.142002] Bluetooth: HCI device and connection manager initialized -[ 0.142583] Bluetooth: HCI socket layer initialized -[ 0.143007] Bluetooth: L2CAP socket layer initialized -[ 0.143491] Bluetooth: SCO socket layer initialized -[ 0.144004] NET: Registered protocol family 8 -[ 0.144401] NET: Registered protocol family 20 -[ 0.145246] cfg80211: Calling CRDA to update world regulatory domain -[ 0.146273] Switching to clocksource kvm-clock -[ 0.146910] pnp: PnP ACPI init -[ 0.146910] ACPI: bus type PNP registered -[ 0.146935] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) -[ 0.147728] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) -[ 0.148363] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) -[ 0.149135] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) -[ 0.149757] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) -[ 0.150535] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) -[ 0.151178] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) -[ 0.151903] pnp 00:03: [dma 2] -[ 0.152228] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) -[ 0.152870] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) -[ 0.153637] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) -[ 0.154287] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) -[ 0.155066] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) -[ 0.155992] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) -[ 0.156803] pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active) -[ 0.157412] pnp: PnP ACPI: found 8 devices -[ 0.157798] ACPI: bus type PNP unregistered -[ 0.163859] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] -[ 0.164387] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] -[ 0.164893] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] -[ 0.165401] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] -[ 0.165903] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] -[ 0.166412] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] -[ 0.166974] pci_bus 0000:00: resource 10 [mem 0x16800000-0xfebfffff] -[ 0.167604] NET: Registered protocol family 2 -[ 0.168277] TCP established hash table entries: 4096 (order: 4, 65536 bytes) -[ 0.168981] TCP bind hash table entries: 4096 (order: 6, 327680 bytes) -[ 0.169845] TCP: Hash tables configured (established 4096 bind 4096) -[ 0.170453] TCP: reno registered -[ 0.170767] UDP hash table entries: 256 (order: 3, 49152 bytes) -[ 0.171346] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) -[ 0.172073] NET: Registered protocol family 1 -[ 0.172710] RPC: Registered named UNIX socket transport module. -[ 0.173260] RPC: Registered udp transport module. -[ 0.173690] RPC: Registered tcp transport module. -[ 0.174127] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.174710] pci 0000:00:00.0: Limiting direct PCI/PCI transfers -[ 0.175263] pci 0000:00:01.0: PIIX3: Enabling Passive Release -[ 0.175803] pci 0000:00:01.0: Activating ISA DMA hang workarounds -[ 0.176394] pci 0000:00:02.0: Boot video device -[ 0.176830] PCI: CLS 0 bytes, default 64 -[ 0.177387] Unpacking initramfs... -[ 1.065747] Freeing initrd memory: 24120k freed -[ 1.073486] Scanning for low memory corruption every 60 seconds -[ 1.074355] cryptomgr_test (23) used greatest stack depth: 6544 bytes left -[ 1.076073] AVX or AES-NI instructions are not detected. -[ 1.076565] AVX instructions are not detected. -[ 1.076973] AVX instructions are not detected. -[ 1.079188] AVX instructions are not detected. -[ 1.079605] PCLMULQDQ-NI instructions are not detected. -[ 1.080365] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=60 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 -[ 1.084872] HugeTLB registered 2 MB page size, pre-allocated 0 pages -[ 1.088385] VFS: Disk quotas dquot_6.5.2 -[ 1.088861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) -[ 1.091052] NFS: Registering the id_resolver key type -[ 1.091561] Key type id_resolver registered -[ 1.091947] Key type id_legacy registered -[ 1.093875] fuse init (API version 7.21) -[ 1.094520] 9p: Installing v9fs 9p2000 file system support -[ 1.095575] msgmni has been set to 644 -[ 1.102033] NET: Registered protocol family 38 -[ 1.102788] Key type asymmetric registered -[ 1.103498] Asymmetric key parser 'x509' registered -[ 1.105709] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8 -[ 1.106533] crc32: self tests passed, processed 225944 bytes in 681887 nsec -[ 1.108350] crc32c: CRC_LE_BITS = 8 -[ 1.108938] crc32c: self tests passed, processed 225944 bytes in 319271 nsec -[ 1.110373] ipmi message handler version 39.2 -[ 1.111174] IPMI System Interface driver. -[ 1.111933] ipmi_si: Adding default-specified kcs state machine -[ 1.112955] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 -[ 1.114594] ipmi_si: Interface detection failed -[ 1.119070] ipmi_si: Adding default-specified smic state machine -[ 1.120138] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 -[ 1.121811] ipmi_si: Interface detection failed -[ 1.127059] ipmi_si: Adding default-specified bt state machine -[ 1.128080] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 -[ 1.129659] ipmi_si: Interface detection failed -[ 1.135240] ipmi_si: Unable to find any System Interface(s) -[ 1.136159] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. -[ 1.137720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 -[ 1.138942] ACPI: Power Button [PWRF] -[ 1.182063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled -[ 1.210231] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A -[ 1.212442] lp: driver loaded but no devices found -[ 1.213344] Non-volatile memory driver v1.3 -[ 1.214174] ppdev: user-space parallel port driver -[ 1.214859] telclk_interrupt = 0xf non-mcpbl0010 hw. -[ 1.215584] [drm] Initialized drm 1.1.0 20060810 -[ 1.217098] parport_pc 00:04: reported by Plug and Play ACPI -[ 1.218056] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] -[ 1.301525] lp0: using parport0 (interrupt-driven). -[ 1.302464] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti -[ 1.303225] c2port c2port0: C2 port uc added -[ 1.303620] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) -[ 1.304684] mtdoops: mtd device (mtddev=name/number) must be supplied -[ 1.305309] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue -[ 1.306033] Generic platform RAM MTD, (c) 2004 Simtec Electronics -[ 1.307658] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.308521] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.309379] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.310234] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.311090] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.311926] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 -[ 1.312782] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 -[ 1.313885] flash size: 128 MiB -[ 1.314191] page size: 512 bytes -[ 1.314490] OOB area size: 16 bytes -[ 1.314810] sector size: 16 KiB -[ 1.315107] pages number: 262144 -[ 1.315408] pages per sector: 32 -[ 1.315705] bus width: 8 -[ 1.315937] bits in sector size: 14 -[ 1.316271] bits in page size: 9 -[ 1.316566] bits in OOB size: 4 -[ 1.316863] flash size with OOB: 135168 KiB -[ 1.317260] page address bytes: 4 -[ 1.317560] sector address bytes: 3 -[ 1.317880] options: 0x42 -[ 1.318653] Scanning device for bad blocks -[ 1.367027] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": -[ 1.367618] 0x000000000000-0x000008000000 : "NAND simulator partition 0" -[ 1.475409] parport_pc 00:04: master is unqueued, this is deprecated -[ 1.476564] parport0: AVR Butterfly -[ 1.477120] parport0: cannot grant exclusive access for device spi-lm70llp -[ 1.478173] spi-lm70llp: spi_lm70llp probe fail, status -12 -[ 1.479138] HSI/SSI char device loaded -[ 1.480432] libphy: Fixed MDIO Bus: probed -[ 1.481173] spi_ks8995: Micrel KS8995 Ethernet switch SPI driver version 0.1.1 -[ 1.482281] arcnet loaded. -[ 1.482712] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. -[ 1.483864] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) -[ 1.484942] E-mail me if you actually test this driver, please! -[ 1.485883] arc%d: No autoprobe for IO mapped cards; you must specify the base address! -[ 1.487198] arcnet: RIM I (entirely mem-mapped) support -[ 1.487978] E-mail me if you actually test the RIM I driver, please! -[ 1.488937] Given: node 00h, shmem 0h, irq 0 -[ 1.489580] No autoprobe for RIM I; you must specify the shmem and irq! -[ 1.490648] vcan: Virtual CAN interface driver -[ 1.491332] CAN device driver interface -[ 1.491966] sja1000 CAN netdevice driver -[ 1.492557] sja1000_isa: insufficient parameters supplied -[ 1.493465] cc770: CAN netdevice driver -[ 1.494079] cc770_isa: insufficient parameters supplied -[ 1.495031] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI -[ 1.496076] e1000: Copyright (c) 1999-2006 Intel Corporation. -[ 1.542037] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 -[ 1.542577] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) -[ 1.543717] e1000 0000:00:03.0: setting latency timer to 64 -[ 1.851266] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 -[ 1.851947] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection -[ 1.852645] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k -[ 1.853200] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. -[ 1.853758] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k -[ 1.854389] igb: Copyright (c) 2007-2013 Intel Corporation. -[ 1.854915] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.11.33-k -[ 1.855629] ixgbe: Copyright (c) 1999-2013 Intel Corporation. -[ 1.856328] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 -[ 1.857868] serio: i8042 KBD port at 0x60,0x64 irq 1 -[ 1.858356] serio: i8042 AUX port at 0x60,0x64 irq 12 -[ 1.858878] parport0: cannot grant exclusive access for device parkbd -[ 1.860449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 -[ 1.861658] i2c /dev entries driver -[ 1.862048] i2c-parport: adapter type unspecified -[ 1.862465] i2c-parport-light: adapter type unspecified -[ 1.864113] pps pps0: new PPS source ktimer -[ 1.864909] pps pps0: ktimer PPS source registered -[ 1.865821] pps_parport: parallel port PPS client -[ 1.866503] parport0: cannot grant exclusive access for device pps_parport -[ 1.867171] pps_parport: couldn't register with parport0 -[ 1.867655] Driver for 1-wire Dallas network protocol. -[ 1.868182] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko -[ 1.868771] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko -[ 1.870233] applesmc: supported laptop not found! -[ 1.870665] applesmc: driver init failed (ret=-19)! -[ 1.871518] pc87360: PC8736x not detected, module not inserted -[ 1.872296] Bluetooth: Virtual HCI driver ver 1.3 -[ 1.872886] cpuidle: using governor ladder -[ 1.873279] cpuidle: using governor menu -[ 1.873874] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) -[ 1.874603] hidraw: raw HID events driver (C) Jiri Kosina -[ 1.875160] hdaps: supported laptop not found! -[ 1.875559] hdaps: driver init failed (ret=-19)! -[ 1.876106] pktgen: Packet Generator for packet performance testing. Version: 2.74 -[ 1.877149] NET: Registered protocol family 26 -[ 1.877604] IPv4 over IPv4 tunneling driver -[ 1.878169] gre: GRE over IPv4 demultiplexor driver -[ 1.878619] ip_gre: GRE over IPv4 tunneling driver -[ 1.879407] TCP: bic registered -[ 1.879710] TCP: westwood registered -[ 1.880048] TCP: highspeed registered -[ 1.880380] TCP: hybla registered -[ 1.880685] TCP: htcp registered -[ 1.880977] TCP: vegas registered -[ 1.881290] TCP: veno registered -[ 1.881589] TCP: scalable registered -[ 1.881916] NET: Registered protocol family 17 -[ 1.882450] NET: Registered protocol family 4 -[ 1.882883] NET: Registered protocol family 5 -[ 1.883320] NET: Registered protocol family 9 -[ 1.883720] X.25 for Linux Version 0.2 -[ 1.884087] can: controller area network core (rev 20120528 abi 9) -[ 1.884680] NET: Registered protocol family 29 -[ 1.885143] can: raw protocol (rev 20120528) -[ 1.885540] can: broadcast manager protocol (rev 20120528 t) -[ 1.886069] can: netlink gateway (rev 20130117) max_hops=1 -[ 1.886699] NET: Registered protocol family 33 -[ 1.887119] Key type rxrpc registered -[ 1.887447] Key type rxrpc_s registered -[ 1.888054] cryptomgr_probe (113) used greatest stack depth: 5856 bytes left -[ 1.888083] RxRPC: Registered security type 2 'rxkad' -[ 1.888125] lec:lane_module_init: lec.c: initialized -[ 1.888132] l2tp_core: L2TP core driver, V2.0 -[ 1.888133] l2tp_netlink: L2TP netlink interface -[ 1.888180] l2tp_debugfs: L2TP debugfs support -[ 1.888201] NET: Registered protocol family 35 -[ 1.888245] 8021q: 802.1Q VLAN Support v1.8 -[ 1.888832] DCCP: Activated CCID 2 (TCP-like) -[ 1.889418] sctp: Hash tables configured (established 1638 bind 1638) -[ 1.889599] tipc: Activated (version 2.0.0) -[ 1.889882] NET: Registered protocol family 30 -[ 1.889883] tipc: Started in single node mode -[ 1.889896] 9pnet: Installing 9P2000 support -[ 1.889943] NET: Registered protocol family 37 -[ 1.889971] NET: Registered protocol family 36 -[ 1.890002] Key type dns_resolver registered -[ 1.890003] openvswitch: Open vSwitch switching datapath -[ 1.890577] -[ 1.890577] printing PIC contents -[ 1.890591] ... PIC IMR: ffff -[ 1.890597] ... PIC IRR: 1013 -[ 1.890607] ... PIC ISR: 0000 -[ 1.890613] ... PIC ELCR: 0c00 -[ 1.890618] printing local APIC contents on CPU#0/0: -[ 1.890625] ... APIC ID: 00000000 (0) -[ 1.890629] ... APIC VERSION: 01050014 -[ 1.890633] ... APIC TASKPRI: 00000000 (00) -[ 1.890637] ... APIC PROCPRI: 00000000 -[ 1.890641] ... APIC LDR: 01000000 -[ 1.890644] ... APIC DFR: ffffffff -[ 1.890648] ... APIC SPIV: 000001ff -[ 1.890649] ... APIC ISR field: -[ 1.890677] 0000000000000000000000000000000000000000000000000000000000000000 -[ 1.890677] ... APIC TMR field: -[ 1.890704] 000000000e200000000000000000000000000000000000000000000000000000 -[ 1.890705] ... APIC IRR field: -[ 1.890732] 0000000000000000000000000000000000000000000000000000000000000000 -[ 1.890738] ... APIC ESR: 00000000 -[ 1.890744] ... APIC ICR: 000008fd -[ 1.890745] ... APIC ICR2: 02000000 -[ 1.890749] ... APIC LVTT: 000000ef -[ 1.890752] ... APIC LVTPC: 00010000 -[ 1.890756] ... APIC LVT0: 00010700 -[ 1.890760] ... APIC LVT1: 00000400 -[ 1.890763] ... APIC LVTERR: 000000fe -[ 1.890767] ... APIC TMICT: 0000ef80 -[ 1.890771] ... APIC TMCCT: 0000391c -[ 1.890774] ... APIC TDCR: 00000003 -[ 1.890775] -[ 1.890776] number of MP IRQ sources: 15. -[ 1.890777] number of IO-APIC #0 registers: 24. -[ 1.890777] testing the IO APIC....................... -[ 1.890797] IO APIC #0...... -[ 1.890798] .... register #00: 00000000 -[ 1.890799] ....... : physical APIC id: 00 -[ 1.890800] ....... : Delivery Type: 0 -[ 1.890800] ....... : LTS : 0 -[ 1.890801] .... register #01: 00170011 -[ 1.890802] ....... : max redirection entries: 17 -[ 1.890802] ....... : PRQ implemented: 0 -[ 1.890803] ....... : IO APIC version: 11 -[ 1.890804] .... register #02: 00000000 -[ 1.890805] ....... : arbitration: 00 -[ 1.890805] .... IRQ redirection table: -[ 1.890820] 1 0 0 0 0 0 0 00 -[ 1.890834] 0 0 0 0 0 1 1 31 -[ 1.890848] 0 0 0 0 0 1 1 30 -[ 1.890861] 0 0 0 0 0 1 1 33 -[ 1.890875] 1 0 0 0 0 1 1 34 -[ 1.890889] 1 1 0 0 0 1 1 35 -[ 1.890902] 0 0 0 0 0 1 1 36 -[ 1.890915] 0 0 0 0 0 1 1 37 -[ 1.890928] 0 0 0 0 0 1 1 38 -[ 1.890942] 0 1 0 0 0 1 1 39 -[ 1.890955] 1 1 0 0 0 1 1 3A -[ 1.890969] 1 1 0 0 0 1 1 3B -[ 1.890982] 0 0 0 0 0 1 1 3C -[ 1.890996] 0 0 0 0 0 1 1 3D -[ 1.891029] 0 0 0 0 0 1 1 3E -[ 1.891043] 0 0 0 0 0 1 1 3F -[ 1.891057] 1 0 0 0 0 0 0 00 -[ 1.891071] 1 0 0 0 0 0 0 00 -[ 1.891084] 1 0 0 0 0 0 0 00 -[ 1.891098] 1 0 0 0 0 0 0 00 -[ 1.891112] 1 0 0 0 0 0 0 00 -[ 1.891125] 1 0 0 0 0 0 0 00 -[ 1.891138] 1 0 0 0 0 0 0 00 -[ 1.891152] 1 0 0 0 0 0 0 00 -[ 1.891152] IRQ to pin mappings: -[ 1.891155] IRQ0 -> 0:2 -[ 1.891156] IRQ1 -> 0:1 -[ 1.891158] IRQ3 -> 0:3 -[ 1.891159] IRQ4 -> 0:4 -[ 1.891161] IRQ5 -> 0:5 -[ 1.891162] IRQ6 -> 0:6 -[ 1.891165] IRQ7 -> 0:7 -[ 1.891167] IRQ8 -> 0:8 -[ 1.891169] IRQ9 -> 0:9 -[ 1.891170] IRQ10 -> 0:10 -[ 1.891172] IRQ11 -> 0:11 -[ 1.891173] IRQ12 -> 0:12 -[ 1.891175] IRQ13 -> 0:13 -[ 1.891184] IRQ14 -> 0:14 -[ 1.891185] IRQ15 -> 0:15 -[ 1.891186] .................................... done. -[ 1.891432] registered taskstats version 1 -[ 1.891433] kAFS: Red Hat AFS client v0.1 registering. -[ 1.928863] Key type encrypted registered -[ 1.929887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found -[ 1.930474] EDD information not available. -[ 1.934906] 8021q: adding VLAN 0 to HW filter on device eth0 -[ 1.935578] IP-Config: Failed to open gretap0 -[ 1.946059] Sending DHCP requests . -[ 2.297875] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 -[ 3.936905] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX -., OK -[ 4.760077] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 -[ 4.761125] IP-Config: Complete: -[ 4.761427] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 -[ 4.762287] host=vm-vp-quantal-x86_64-2, domain=, nis-domain=(none) -[ 4.762882] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= -[ 4.763432] nameserver0=10.0.2.3 -[ 4.770395] Freeing unused kernel memory: 2824k freed -[ 4.771680] Write protecting the kernel read-only data: 12288k -[ 4.779402] Freeing unused kernel memory: 1968k freed -[ 4.783989] Freeing unused kernel memory: 1212k freed -[ 4.798890] hostname (124) used greatest stack depth: 5712 bytes left -[ 4.872775] init: Failed to create pty - disabling logging for job -[ 4.873850] init: Temporary process spawn error: No space left on device -[ 4.955413] 00-header (177) used greatest stack depth: 5592 bytes left -[ 4.962511] udevd[193]: starting version 175 -udevd[205]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory -udevd[207]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory -udevd[218]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00': No such file or directory -udevd[221]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory -udevd[226]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80': No such file or directory -udevd[217]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory -udevd[232]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001013d000000B8sv00001AF4sd00001100bc03sc00i00': No such file or directory -udevd[208]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0019v0000p0001e0000-e0,1,k74,ramlsfw': No such file or directory -udevd[224]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory -udevd[236]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory -udevd[237]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory -udevd[239]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:Fixed MDIO bus': No such file or directory -udevd[240]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory -udevd[241]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory -udevd[242]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory -udevd[235]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory -udevd[238]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:regulatory': No such file or directory -udevd[243]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory -udevd[246]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory -udevd[244]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory -udevd[245]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0002p0006e0000-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw': No such file or directory -udevd[247]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory -udevd[275]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory -udevd[276]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory -udevd[277]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory -udevd[278]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory -udevd[279]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory -udevd[280]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory -udevd[282]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv x86cpu:vendor:00FF:family:0006:model:0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,0020,0022,0023,0024,0025,0026,0027,0028,0029,002B,002D,002F,0030,0034,0037,0038,003D,0074,0080,008D,0095,0097,009F,00C0 -': No such file or directory -udevd[284]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv spi:mtd_dataflash': No such file or directory -udevd[283]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv x86cpu:vendor:00FF:family:0006:model:0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,0020,0022,0023,0024,0025,0026,0027,0028,0029,002B,002D,002F,0030,0034,0037,0038,003D,0074,0080,008D,0095,0097,009F,00C0 -': No such file or directory -udevd[285]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv dmi:bvnSeaBIOS:bvr1.7.5-20140531_083030-gandalf:bd04/01/2014:svnQEMU:pnStandardPC(i440FX+PIIX,1996):pvrpc-i440fx-2.1:cvnQEMU:ct1:cvrpc-i440fx-2.1:': No such file or directory -start: Job is already running: rc -PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin - -==> /tmp/lkp/stdout <== - -==> /tmp/lkp/stderr <== -==> /tmp/lkp/stdout <== - -==> /tmp/lkp/stderr <== -LKP: HOSTNAME localhost.localdomain, MAC 52:54:00:12:34:56, kernel 3.9.0-rc3-00755-gc544193 34, serial console /dev/ttyS0 - -==> /tmp/lkp/stdout <== -Kernel tests: Boot OK! - -==> /tmp/lkp/stdout <== -Kernel tests: Boot OK! - -==> /tmp/lkp/stderr <== -hostname: -==> /tmp/lkp/stderr <== -hostname: the specified hostname is invalidthe specified hostname is invalid - - -==> /tmp/lkp/stdout <== -/lkp/lkp/src/bin/run-lkp - -==> /tmp/lkp/stdout <== -/lkp/lkp/src/bin/run-lkp -RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 -RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 -job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml -job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml - -==> /tmp/lkp/stderr <== -grep: -==> /tmp/lkp/stderr <== -grep: /etc/os-release/etc/os-release: No such file or directory: No such file or directory - -/lkp/lkp/src/lib/bootstrap.sh: line 215: mount.nfs: command not found -/lkp/lkp/src/lib/bootstrap.sh: line 215: mount.nfs: command not found -[ 14.907216] BUG: unable to handle kernel paging request at ffffffff776a64b0 -[ 14.908009] IP: [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 -[ 14.908009] PGD 1c08067 PUD 0 -[ 14.908009] Oops: 0000 [#1] SMP -[ 14.908009] CPU 0 -[ 14.908009] Pid: 409, comm: trinity-main Not tainted 3.9.0-rc3-00755-gc544193 #34 QEMU Standard PC (i440FX + PIIX, 1996) -[ 14.908009] RIP: 0010:[<ffffffff810e132d>] [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 -[ 14.908009] RSP: 0018:ffff88000d083de8 EFLAGS: 00010283 -[ 14.908009] RAX: 0000000000000002 RBX: 0000000000000000 RCX: ffff88000d241c07 -[ 14.908009] RDX: 0000000000000002 RSI: 0000000000000002 RDI: ffffffff776a64b0 -[ 14.908009] RBP: ffff88000d083e10 R08: 0000000000000001 R09: 0000000000000275 -[ 14.908009] R10: 0000000000000000 R11: 0000000000000002 R12: ffffffffff4dade7 -[ 14.908009] R13: ffff880015483800 R14: 0000000000000002 R15: fffffffffffffff4 -[ 14.908009] FS: 00007f1463805700(0000) GS:ffff880014a00000(0000) knlGS:0000000000000000 -[ 14.908009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 -[ 14.908009] CR2: ffffffff776a64b0 CR3: 00000000154df000 CR4: 00000000000006b0 -[ 14.908009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 -[ 14.908009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 -[ 14.908009] Process trinity-main (pid: 409, threadinfo ffff88000d082000, task ffff88000d241420) -[ 14.908009] Stack: -[ 14.908009] ffffffff810d9abd ffffffff81c5ba40 ffff880015483800 0000000000000000 -[ 14.908009] ffff88000d241420 ffff88000d083e40 ffffffff810dd81d ffffffff81c5ba40 -[ 14.908009] ffff880015483800 ffff88000d083ef0 0000000000000000 ffff88000d083e98 -[ 14.908009] Call Trace: -[ 14.908009] [<ffffffff810d9abd>] ? perf_swevent_init+0xe2/0x103 -[ 14.908009] [<ffffffff810dd81d>] perf_init_event+0xaa/0xf6 -[ 14.908009] [<ffffffff810ddab8>] perf_event_alloc+0x24f/0x351 -[ 14.908009] [<ffffffff8160fbea>] ? _raw_spin_unlock+0x22/0x34 -[ 14.908009] [<ffffffff810de154>] sys_perf_event_open+0x3a1/0x86b -[ 14.908009] [<ffffffff81611029>] system_call_fastpath+0x16/0x1b -[ 14.908009] Code: 75 02 31 f6 48 89 df e8 1b ff ff ff e8 7b ff ff ff 5b 41 5c 41 5d 5d c3 55 48 83 ef 18 31 d2 31 f6 48 89 e5 e8 75 ff ff ff 5d c3 <8b> 17 85 d2 74 11 8d 4a 01 89 d0 f0 0f b1 0f 39 d0 74 3b 89 c2 -[ 14.908009] RIP [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 -[ 14.908009] RSP <ffff88000d083de8> -[ 14.908009] CR2: ffffffff776a64b0 -[ 14.908009] ---[ end trace 481a2e63628caac9 ]--- -[ 14.908009] Kernel panic - not syncing: Fatal exception - -Elapsed time: 20 -qemu-system-x86_64 -enable-kvm -kernel /kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drbd.minor_count=8' -initrd /fs/sdf1/initrd-vm-vp-quantal-x86_64-2 -m 360 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-2 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-x86_64-2 -daemonize -display none -monitor null +_______________________________________________ +LKP mailing list +LKP@linux.intel.com diff --git a/N1/4.hdr b/N1/4.hdr new file mode 100644 index 0000000..2219b05 --- /dev/null +++ b/N1/4.hdr @@ -0,0 +1,3 @@ +Content-Disposition: attachment; filename="dmesg" +Content-Transfer-Encoding: base64 +Content-Type: text/plain; name="dmesg"; charset="UTF-8" diff --git a/N1/4.txt b/N1/4.txt new file mode 100644 index 0000000..6c4e725 --- /dev/null +++ b/N1/4.txt @@ -0,0 +1,768 @@ +early console in setup code +Probing EDD (edd=off to disable)... ok +[ 0.000000] Initializing cgroup subsys cpu +[ 0.000000] Linux version 3.9.0-rc3-00755-gc544193 (kbuild@lkp-nex05) (gcc version 4.9.2 (Debian 4.9.2-10) ) #34 SMP Sun May 3 12:17:20 CST 2015 +[ 0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drbd.minor +[ 0.000000] KERNEL supported cpus: +[ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. +[ 0.000000] CPU: Your system may be unstable. +[ 0.000000] e820: BIOS-provided physical RAM map: +[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable +[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved +[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved +[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable +[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved +[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved +[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved +[ 0.000000] NX (Execute Disable) protection: active +[ 0.000000] SMBIOS 2.8 present. +[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 +[ 0.000000] Hypervisor detected: KVM +[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved +[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable +[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x400000000 +[ 0.000000] MTRR default type: write-back +[ 0.000000] MTRR fixed ranges enabled: +[ 0.000000] 00000-9FFFF write-back +[ 0.000000] A0000-BFFFF uncachable +[ 0.000000] C0000-FFFFF write-protect +[ 0.000000] MTRR variable ranges enabled: +[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable +[ 0.000000] 1 disabled +[ 0.000000] 2 disabled +[ 0.000000] 3 disabled +[ 0.000000] 4 disabled +[ 0.000000] 5 disabled +[ 0.000000] 6 disabled +[ 0.000000] 7 disabled +[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 +[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] +[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] +[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] +[ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] +[ 0.000000] mpc: f0ec0-f0fa4 +[ 0.000000] Scanning 1 areas for low memory corruption +[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 +[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] +[ 0.000000] [mem 0x00000000-0x000fffff] page 4k +[ 0.000000] BRK [0x02abd000, 0x02abdfff] PGTABLE +[ 0.000000] BRK [0x02abe000, 0x02abefff] PGTABLE +[ 0.000000] BRK [0x02abf000, 0x02abffff] PGTABLE +[ 0.000000] init_memory_mapping: [mem 0x14e00000-0x14ffffff] +[ 0.000000] [mem 0x14e00000-0x14ffffff] page 2M +[ 0.000000] init_memory_mapping: [mem 0x14000000-0x14dfffff] +[ 0.000000] [mem 0x14000000-0x14dfffff] page 2M +[ 0.000000] init_memory_mapping: [mem 0x00100000-0x13ffffff] +[ 0.000000] [mem 0x00100000-0x001fffff] page 4k +[ 0.000000] [mem 0x00200000-0x13ffffff] page 2M +[ 0.000000] init_memory_mapping: [mem 0x15000000-0x167dffff] +[ 0.000000] [mem 0x15000000-0x165fffff] page 2M +[ 0.000000] [mem 0x16600000-0x167dffff] page 4k +[ 0.000000] BRK [0x02ac0000, 0x02ac0fff] PGTABLE +[ 0.000000] RAMDISK: [mem 0x1504a000-0x167d7fff] +[ 0.000000] ACPI: RSDP 00000000000f0c90 00014 (v00 BOCHS ) +[ 0.000000] ACPI: RSDT 00000000167e18bd 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) +[ 0.000000] ACPI: FACP 00000000167e0b37 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) +[ 0.000000] ACPI: DSDT 00000000167e0040 00AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) +[ 0.000000] ACPI: FACS 00000000167e0000 00040 +[ 0.000000] ACPI: SSDT 00000000167e0bab 00C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) +[ 0.000000] ACPI: APIC 00000000167e1805 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) +[ 0.000000] ACPI: HPET 00000000167e1885 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) +[ 0.000000] ACPI: Local APIC address 0xfee00000 +[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) +[ 0.000000] No NUMA configuration found +[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000167dffff] +[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x167dffff] +[ 0.000000] NODE_DATA [mem 0x1502d000-0x15049fff] +[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 +[ 0.000000] kvm-clock: cpu 0, msr 0:14fed001, boot clock +[ 0.000000] Zone ranges: +[ 0.000000] DMA32 [mem 0x00001000-0xffffffff] +[ 0.000000] Normal empty +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x00001000-0x0009efff] +[ 0.000000] node 0: [mem 0x00100000-0x167dffff] +[ 0.000000] On node 0 totalpages: 92030 +[ 0.000000] DMA32 zone: 1440 pages used for memmap +[ 0.000000] DMA32 zone: 21 pages reserved +[ 0.000000] DMA32 zone: 92030 pages, LIFO batch:31 +[ 0.000000] ACPI: PM-Timer IO Port: 0x608 +[ 0.000000] ACPI: Local APIC address 0xfee00000 +[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) +[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) +[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) +[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) +[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) +[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 +[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 +[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) +[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 +[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) +[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 +[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) +[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a +[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) +[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b +[ 0.000000] ACPI: IRQ0 used by override. +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 +[ 0.000000] ACPI: IRQ2 used by override. +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 +[ 0.000000] ACPI: IRQ5 used by override. +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 +[ 0.000000] ACPI: IRQ9 used by override. +[ 0.000000] ACPI: IRQ10 used by override. +[ 0.000000] ACPI: IRQ11 used by override. +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e +[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f +[ 0.000000] Using ACPI (MADT) for SMP configuration information +[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 +[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs +[ 0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000) +[ 0.000000] nr_irqs_gsi: 40 +[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices +[ 0.000000] Booting paravirtualized kernel on KVM +[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 +[ 0.000000] PERCPU: Embedded 472 pages/cpu @ffff880014a00000 s1910528 r0 d22784 u2097152 +[ 0.000000] pcpu-alloc: s1910528 r0 d22784 u2097152 alloc=1*2097152 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 +[ 0.000000] kvm-clock: cpu 0, msr 0:14fed001, primary cpu clock +[ 0.000000] KVM setup async PF for cpu 0 +[ 0.000000] kvm-stealtime: cpu 0, msr 14a0cb40 +[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 90569 +[ 0.000000] Policy zone: DMA32 +[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drb +[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) +[ 0.000000] __ex_table already sorted, skipping sort +[ 0.000000] Memory: 305836k/368512k available (6219k kernel code, 392k absent, 62284k reserved, 7251k data, 2824k init) +[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 +[ 0.000000] Hierarchical RCU implementation. +[ 0.000000] NR_IRQS:262400 nr_irqs:512 16 +[ 0.000000] console [ttyS0] enabled +[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar +[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 +[ 0.000000] ... MAX_LOCK_DEPTH: 48 +[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 +[ 0.000000] ... CLASSHASH_SIZE: 4096 +[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 +[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 +[ 0.000000] ... CHAINHASH_SIZE: 16384 +[ 0.000000] memory used by lock dependency info: 6367 kB +[ 0.000000] per task-struct memory footprint: 2688 bytes +[ 0.000000] ODEBUG: 0 of 0 active objects replaced +[ 0.000000] hpet clockevent registered +[ 0.000000] tsc: Detected 2693.508 MHz processor +[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized +[ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508) +[ 0.003006] pid_max: default: 4096 minimum: 301 +[ 0.003552] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) +[ 0.004182] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) +[ 0.005051] Mount-cache hash table entries: 256 +[ 0.006277] Initializing cgroup subsys freezer +[ 0.006706] Initializing cgroup subsys perf_event +[ 0.007091] numa_add_cpu cpu 0 node 0: mask now 0 +[ 0.007530] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 +[ 0.007530] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 +[ 0.007530] tlb_flushall_shift: -1 +[ 0.009082] Freeing SMP alternatives: 12k freed +[ 0.010232] ACPI: Core revision 20130117 +[ 0.012351] ACPI: All ACPI Tables successfully acquired +[ 0.013120] Getting VERSION: 1050014 +[ 0.013469] Getting VERSION: 1050014 +[ 0.013806] Getting ID: 0 +[ 0.014020] Getting ID: ff000000 +[ 0.014340] Getting LVT0: 8700 +[ 0.014629] Getting LVT1: 8400 +[ 0.015048] enabled ExtINT on CPU#0 +[ 0.016129] ENABLING IO-APIC IRQs +[ 0.016450] init IO_APIC IRQs +[ 0.016727] apic 0 pin 0 not connected +[ 0.017017] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) +[ 0.017762] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) +[ 0.018023] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) +[ 0.019022] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) +[ 0.020028] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) +[ 0.020759] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) +[ 0.021022] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) +[ 0.022021] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) +[ 0.023022] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) +[ 0.024021] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) +[ 0.024793] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) +[ 0.025022] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) +[ 0.026021] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) +[ 0.027021] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) +[ 0.028021] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) +[ 0.028775] apic 0 pin 16 not connected +[ 0.029003] apic 0 pin 17 not connected +[ 0.029364] apic 0 pin 18 not connected +[ 0.029723] apic 0 pin 19 not connected +[ 0.030003] apic 0 pin 20 not connected +[ 0.030371] apic 0 pin 21 not connected +[ 0.031003] apic 0 pin 22 not connected +[ 0.031372] apic 0 pin 23 not connected +[ 0.031872] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 +[ 0.032003] smpboot: CPU0: GenuineIntel QEMU Virtual CPU version 2.1.2 (fam: 06, model: 06, stepping: 03) +[ 0.033837] Using local APIC timer interrupts. +[ 0.033837] calibrating APIC timer ... +[ 0.035000] ... lapic delta = 6249791 +[ 0.035000] ... PM-Timer delta = 357909 +[ 0.035000] ... PM-Timer result ok +[ 0.035000] ..... delta 6249791 +[ 0.035000] ..... mult: 268426479 +[ 0.035000] ..... calibration result: 999966 +[ 0.035000] ..... CPU clock speed is 2693.0162 MHz. +[ 0.035000] ..... host bus clock speed is 999.0966 MHz. +[ 0.035071] Performance Events: +[ 0.036104] SMP alternatives: lockdep: fixing up alternatives +[ 0.037015] smpboot: Booting Node 0, Processors #1 OK +[ 0.003000] kvm-clock: cpu 1, msr 0:14fed041, secondary cpu clock +[ 0.003000] masked ExtINT on CPU#1 +[ 0.003000] numa_add_cpu cpu 1 node 0: mask now 0-1 +[ 0.049962] Brought up 2 CPUs +[ 0.049926] KVM setup async PF for cpu 1 +[ 0.049926] kvm-stealtime: cpu 1, msr 14c0cb40 +[ 0.050007] ---------------- +[ 0.051002] | NMI testsuite: +[ 0.051269] -------------------- +[ 0.051558] remote IPI: ok | +[ 0.055121] local IPI: ok | +[ 0.061011] -------------------- +[ 0.061326] Good, all 2 testcases passed! | +[ 0.061719] --------------------------------- +[ 0.062004] smpboot: Total of 2 processors activated (10774.03 BogoMIPS) +[ 0.063228] devtmpfs: initialized +[ 0.067311] NET: Registered protocol family 16 +[ 0.068733] ACPI: bus type PCI registered +[ 0.069097] PCI: Using configuration type 1 for base access +[ 0.074533] ACPI: Added _OSI(Module Device) +[ 0.075005] ACPI: Added _OSI(Processor Device) +[ 0.075411] ACPI: Added _OSI(3.0 _SCP Extensions) +[ 0.076004] ACPI: Added _OSI(Processor Aggregator Device) +[ 0.078744] ACPI: EC: Look up EC in DSDT +[ 0.082536] ACPI: Interpreter enabled +[ 0.082881] ACPI: (supports S0 S5) +[ 0.083003] ACPI: Using IOAPIC for interrupt routing +[ 0.083477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug +[ 0.090780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) +[ 0.091009] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) +[ 0.092223] PCI host bridge to bus 0000:00 +[ 0.092605] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.093004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] +[ 0.093555] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] +[ 0.094003] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] +[ 0.094551] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] +[ 0.095004] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] +[ 0.095544] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] +[ 0.096004] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff] +[ 0.097058] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 +[ 0.098091] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 +[ 0.099096] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 +[ 0.101822] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] +[ 0.103539] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 +[ 0.104347] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI +[ 0.105012] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB +[ 0.105821] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 +[ 0.107402] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] +[ 0.108855] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] +[ 0.113418] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] +[ 0.114204] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 +[ 0.115380] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff] +[ 0.117004] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] +[ 0.121005] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] +[ 0.121763] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 +[ 0.122412] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f] +[ 0.126169] ACPI _OSC control for PCIe not granted, disabling ASPM +[ 0.127753] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) +[ 0.128327] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) +[ 0.129202] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) +[ 0.129919] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) +[ 0.130254] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) +[ 0.131508] ACPI: Enabled 16 GPEs in block 00 to 0F +[ 0.132011] acpi root: \_SB_.PCI0 notify handler is installed +[ 0.132649] Found 1 acpi root devices +[ 0.133195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none +[ 0.134006] vgaarb: loaded +[ 0.134265] vgaarb: bridge control possible 0000:00:02.0 +[ 0.134774] Error: Driver '88PM80X' is already registered, aborting... +[ 0.135332] pps_core: LinuxPPS API ver. 1 registered +[ 0.136003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +[ 0.137013] PTP clock support registered +[ 0.137392] EDAC MC: Ver: 3.0.0 +[ 0.137821] EDAC DEBUG: edac_mc_sysfs_init: device mc created +[ 0.138080] PCI: Using ACPI for IRQ routing +[ 0.138452] PCI: pci_cache_line_size set to 64 bytes +[ 0.139108] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] +[ 0.140004] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff] +[ 0.140847] NET: Registered protocol family 23 +[ 0.141044] Bluetooth: Core ver 2.16 +[ 0.141393] NET: Registered protocol family 31 +[ 0.142002] Bluetooth: HCI device and connection manager initialized +[ 0.142583] Bluetooth: HCI socket layer initialized +[ 0.143007] Bluetooth: L2CAP socket layer initialized +[ 0.143491] Bluetooth: SCO socket layer initialized +[ 0.144004] NET: Registered protocol family 8 +[ 0.144401] NET: Registered protocol family 20 +[ 0.145246] cfg80211: Calling CRDA to update world regulatory domain +[ 0.146273] Switching to clocksource kvm-clock +[ 0.146910] pnp: PnP ACPI init +[ 0.146910] ACPI: bus type PNP registered +[ 0.146935] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) +[ 0.147728] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) +[ 0.148363] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) +[ 0.149135] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) +[ 0.149757] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) +[ 0.150535] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) +[ 0.151178] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) +[ 0.151903] pnp 00:03: [dma 2] +[ 0.152228] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) +[ 0.152870] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) +[ 0.153637] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) +[ 0.154287] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) +[ 0.155066] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) +[ 0.155992] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) +[ 0.156803] pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active) +[ 0.157412] pnp: PnP ACPI: found 8 devices +[ 0.157798] ACPI: bus type PNP unregistered +[ 0.163859] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] +[ 0.164387] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] +[ 0.164893] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] +[ 0.165401] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] +[ 0.165903] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] +[ 0.166412] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] +[ 0.166974] pci_bus 0000:00: resource 10 [mem 0x16800000-0xfebfffff] +[ 0.167604] NET: Registered protocol family 2 +[ 0.168277] TCP established hash table entries: 4096 (order: 4, 65536 bytes) +[ 0.168981] TCP bind hash table entries: 4096 (order: 6, 327680 bytes) +[ 0.169845] TCP: Hash tables configured (established 4096 bind 4096) +[ 0.170453] TCP: reno registered +[ 0.170767] UDP hash table entries: 256 (order: 3, 49152 bytes) +[ 0.171346] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) +[ 0.172073] NET: Registered protocol family 1 +[ 0.172710] RPC: Registered named UNIX socket transport module. +[ 0.173260] RPC: Registered udp transport module. +[ 0.173690] RPC: Registered tcp transport module. +[ 0.174127] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.174710] pci 0000:00:00.0: Limiting direct PCI/PCI transfers +[ 0.175263] pci 0000:00:01.0: PIIX3: Enabling Passive Release +[ 0.175803] pci 0000:00:01.0: Activating ISA DMA hang workarounds +[ 0.176394] pci 0000:00:02.0: Boot video device +[ 0.176830] PCI: CLS 0 bytes, default 64 +[ 0.177387] Unpacking initramfs... +[ 1.065747] Freeing initrd memory: 24120k freed +[ 1.073486] Scanning for low memory corruption every 60 seconds +[ 1.074355] cryptomgr_test (23) used greatest stack depth: 6544 bytes left +[ 1.076073] AVX or AES-NI instructions are not detected. +[ 1.076565] AVX instructions are not detected. +[ 1.076973] AVX instructions are not detected. +[ 1.079188] AVX instructions are not detected. +[ 1.079605] PCLMULQDQ-NI instructions are not detected. +[ 1.080365] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=60 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 +[ 1.084872] HugeTLB registered 2 MB page size, pre-allocated 0 pages +[ 1.088385] VFS: Disk quotas dquot_6.5.2 +[ 1.088861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 1.091052] NFS: Registering the id_resolver key type +[ 1.091561] Key type id_resolver registered +[ 1.091947] Key type id_legacy registered +[ 1.093875] fuse init (API version 7.21) +[ 1.094520] 9p: Installing v9fs 9p2000 file system support +[ 1.095575] msgmni has been set to 644 +[ 1.102033] NET: Registered protocol family 38 +[ 1.102788] Key type asymmetric registered +[ 1.103498] Asymmetric key parser 'x509' registered +[ 1.105709] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8 +[ 1.106533] crc32: self tests passed, processed 225944 bytes in 681887 nsec +[ 1.108350] crc32c: CRC_LE_BITS = 8 +[ 1.108938] crc32c: self tests passed, processed 225944 bytes in 319271 nsec +[ 1.110373] ipmi message handler version 39.2 +[ 1.111174] IPMI System Interface driver. +[ 1.111933] ipmi_si: Adding default-specified kcs state machine +[ 1.112955] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 +[ 1.114594] ipmi_si: Interface detection failed +[ 1.119070] ipmi_si: Adding default-specified smic state machine +[ 1.120138] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 +[ 1.121811] ipmi_si: Interface detection failed +[ 1.127059] ipmi_si: Adding default-specified bt state machine +[ 1.128080] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 +[ 1.129659] ipmi_si: Interface detection failed +[ 1.135240] ipmi_si: Unable to find any System Interface(s) +[ 1.136159] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. +[ 1.137720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 +[ 1.138942] ACPI: Power Button [PWRF] +[ 1.182063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled +[ 1.210231] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A +[ 1.212442] lp: driver loaded but no devices found +[ 1.213344] Non-volatile memory driver v1.3 +[ 1.214174] ppdev: user-space parallel port driver +[ 1.214859] telclk_interrupt = 0xf non-mcpbl0010 hw. +[ 1.215584] [drm] Initialized drm 1.1.0 20060810 +[ 1.217098] parport_pc 00:04: reported by Plug and Play ACPI +[ 1.218056] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] +[ 1.301525] lp0: using parport0 (interrupt-driven). +[ 1.302464] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti +[ 1.303225] c2port c2port0: C2 port uc added +[ 1.303620] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) +[ 1.304684] mtdoops: mtd device (mtddev=name/number) must be supplied +[ 1.305309] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue +[ 1.306033] Generic platform RAM MTD, (c) 2004 Simtec Electronics +[ 1.307658] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.308521] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.309379] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.310234] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.311090] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.311926] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 +[ 1.312782] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 +[ 1.313885] flash size: 128 MiB +[ 1.314191] page size: 512 bytes +[ 1.314490] OOB area size: 16 bytes +[ 1.314810] sector size: 16 KiB +[ 1.315107] pages number: 262144 +[ 1.315408] pages per sector: 32 +[ 1.315705] bus width: 8 +[ 1.315937] bits in sector size: 14 +[ 1.316271] bits in page size: 9 +[ 1.316566] bits in OOB size: 4 +[ 1.316863] flash size with OOB: 135168 KiB +[ 1.317260] page address bytes: 4 +[ 1.317560] sector address bytes: 3 +[ 1.317880] options: 0x42 +[ 1.318653] Scanning device for bad blocks +[ 1.367027] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": +[ 1.367618] 0x000000000000-0x000008000000 : "NAND simulator partition 0" +[ 1.475409] parport_pc 00:04: master is unqueued, this is deprecated +[ 1.476564] parport0: AVR Butterfly +[ 1.477120] parport0: cannot grant exclusive access for device spi-lm70llp +[ 1.478173] spi-lm70llp: spi_lm70llp probe fail, status -12 +[ 1.479138] HSI/SSI char device loaded +[ 1.480432] libphy: Fixed MDIO Bus: probed +[ 1.481173] spi_ks8995: Micrel KS8995 Ethernet switch SPI driver version 0.1.1 +[ 1.482281] arcnet loaded. +[ 1.482712] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. +[ 1.483864] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) +[ 1.484942] E-mail me if you actually test this driver, please! +[ 1.485883] arc%d: No autoprobe for IO mapped cards; you must specify the base address! +[ 1.487198] arcnet: RIM I (entirely mem-mapped) support +[ 1.487978] E-mail me if you actually test the RIM I driver, please! +[ 1.488937] Given: node 00h, shmem 0h, irq 0 +[ 1.489580] No autoprobe for RIM I; you must specify the shmem and irq! +[ 1.490648] vcan: Virtual CAN interface driver +[ 1.491332] CAN device driver interface +[ 1.491966] sja1000 CAN netdevice driver +[ 1.492557] sja1000_isa: insufficient parameters supplied +[ 1.493465] cc770: CAN netdevice driver +[ 1.494079] cc770_isa: insufficient parameters supplied +[ 1.495031] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI +[ 1.496076] e1000: Copyright (c) 1999-2006 Intel Corporation. +[ 1.542037] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 +[ 1.542577] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) +[ 1.543717] e1000 0000:00:03.0: setting latency timer to 64 +[ 1.851266] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 +[ 1.851947] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection +[ 1.852645] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k +[ 1.853200] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. +[ 1.853758] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k +[ 1.854389] igb: Copyright (c) 2007-2013 Intel Corporation. +[ 1.854915] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.11.33-k +[ 1.855629] ixgbe: Copyright (c) 1999-2013 Intel Corporation. +[ 1.856328] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 +[ 1.857868] serio: i8042 KBD port at 0x60,0x64 irq 1 +[ 1.858356] serio: i8042 AUX port at 0x60,0x64 irq 12 +[ 1.858878] parport0: cannot grant exclusive access for device parkbd +[ 1.860449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 +[ 1.861658] i2c /dev entries driver +[ 1.862048] i2c-parport: adapter type unspecified +[ 1.862465] i2c-parport-light: adapter type unspecified +[ 1.864113] pps pps0: new PPS source ktimer +[ 1.864909] pps pps0: ktimer PPS source registered +[ 1.865821] pps_parport: parallel port PPS client +[ 1.866503] parport0: cannot grant exclusive access for device pps_parport +[ 1.867171] pps_parport: couldn't register with parport0 +[ 1.867655] Driver for 1-wire Dallas network protocol. +[ 1.868182] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko +[ 1.868771] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko +[ 1.870233] applesmc: supported laptop not found! +[ 1.870665] applesmc: driver init failed (ret=-19)! +[ 1.871518] pc87360: PC8736x not detected, module not inserted +[ 1.872296] Bluetooth: Virtual HCI driver ver 1.3 +[ 1.872886] cpuidle: using governor ladder +[ 1.873279] cpuidle: using governor menu +[ 1.873874] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) +[ 1.874603] hidraw: raw HID events driver (C) Jiri Kosina +[ 1.875160] hdaps: supported laptop not found! +[ 1.875559] hdaps: driver init failed (ret=-19)! +[ 1.876106] pktgen: Packet Generator for packet performance testing. Version: 2.74 +[ 1.877149] NET: Registered protocol family 26 +[ 1.877604] IPv4 over IPv4 tunneling driver +[ 1.878169] gre: GRE over IPv4 demultiplexor driver +[ 1.878619] ip_gre: GRE over IPv4 tunneling driver +[ 1.879407] TCP: bic registered +[ 1.879710] TCP: westwood registered +[ 1.880048] TCP: highspeed registered +[ 1.880380] TCP: hybla registered +[ 1.880685] TCP: htcp registered +[ 1.880977] TCP: vegas registered +[ 1.881290] TCP: veno registered +[ 1.881589] TCP: scalable registered +[ 1.881916] NET: Registered protocol family 17 +[ 1.882450] NET: Registered protocol family 4 +[ 1.882883] NET: Registered protocol family 5 +[ 1.883320] NET: Registered protocol family 9 +[ 1.883720] X.25 for Linux Version 0.2 +[ 1.884087] can: controller area network core (rev 20120528 abi 9) +[ 1.884680] NET: Registered protocol family 29 +[ 1.885143] can: raw protocol (rev 20120528) +[ 1.885540] can: broadcast manager protocol (rev 20120528 t) +[ 1.886069] can: netlink gateway (rev 20130117) max_hops=1 +[ 1.886699] NET: Registered protocol family 33 +[ 1.887119] Key type rxrpc registered +[ 1.887447] Key type rxrpc_s registered +[ 1.888054] cryptomgr_probe (113) used greatest stack depth: 5856 bytes left +[ 1.888083] RxRPC: Registered security type 2 'rxkad' +[ 1.888125] lec:lane_module_init: lec.c: initialized +[ 1.888132] l2tp_core: L2TP core driver, V2.0 +[ 1.888133] l2tp_netlink: L2TP netlink interface +[ 1.888180] l2tp_debugfs: L2TP debugfs support +[ 1.888201] NET: Registered protocol family 35 +[ 1.888245] 8021q: 802.1Q VLAN Support v1.8 +[ 1.888832] DCCP: Activated CCID 2 (TCP-like) +[ 1.889418] sctp: Hash tables configured (established 1638 bind 1638) +[ 1.889599] tipc: Activated (version 2.0.0) +[ 1.889882] NET: Registered protocol family 30 +[ 1.889883] tipc: Started in single node mode +[ 1.889896] 9pnet: Installing 9P2000 support +[ 1.889943] NET: Registered protocol family 37 +[ 1.889971] NET: Registered protocol family 36 +[ 1.890002] Key type dns_resolver registered +[ 1.890003] openvswitch: Open vSwitch switching datapath +[ 1.890577] +[ 1.890577] printing PIC contents +[ 1.890591] ... PIC IMR: ffff +[ 1.890597] ... PIC IRR: 1013 +[ 1.890607] ... PIC ISR: 0000 +[ 1.890613] ... PIC ELCR: 0c00 +[ 1.890618] printing local APIC contents on CPU#0/0: +[ 1.890625] ... APIC ID: 00000000 (0) +[ 1.890629] ... APIC VERSION: 01050014 +[ 1.890633] ... APIC TASKPRI: 00000000 (00) +[ 1.890637] ... APIC PROCPRI: 00000000 +[ 1.890641] ... APIC LDR: 01000000 +[ 1.890644] ... APIC DFR: ffffffff +[ 1.890648] ... APIC SPIV: 000001ff +[ 1.890649] ... APIC ISR field: +[ 1.890677] 0000000000000000000000000000000000000000000000000000000000000000 +[ 1.890677] ... APIC TMR field: +[ 1.890704] 000000000e200000000000000000000000000000000000000000000000000000 +[ 1.890705] ... APIC IRR field: +[ 1.890732] 0000000000000000000000000000000000000000000000000000000000000000 +[ 1.890738] ... APIC ESR: 00000000 +[ 1.890744] ... APIC ICR: 000008fd +[ 1.890745] ... APIC ICR2: 02000000 +[ 1.890749] ... APIC LVTT: 000000ef +[ 1.890752] ... APIC LVTPC: 00010000 +[ 1.890756] ... APIC LVT0: 00010700 +[ 1.890760] ... APIC LVT1: 00000400 +[ 1.890763] ... APIC LVTERR: 000000fe +[ 1.890767] ... APIC TMICT: 0000ef80 +[ 1.890771] ... APIC TMCCT: 0000391c +[ 1.890774] ... APIC TDCR: 00000003 +[ 1.890775] +[ 1.890776] number of MP IRQ sources: 15. +[ 1.890777] number of IO-APIC #0 registers: 24. +[ 1.890777] testing the IO APIC....................... +[ 1.890797] IO APIC #0...... +[ 1.890798] .... register #00: 00000000 +[ 1.890799] ....... : physical APIC id: 00 +[ 1.890800] ....... : Delivery Type: 0 +[ 1.890800] ....... : LTS : 0 +[ 1.890801] .... register #01: 00170011 +[ 1.890802] ....... : max redirection entries: 17 +[ 1.890802] ....... : PRQ implemented: 0 +[ 1.890803] ....... : IO APIC version: 11 +[ 1.890804] .... register #02: 00000000 +[ 1.890805] ....... : arbitration: 00 +[ 1.890805] .... IRQ redirection table: +[ 1.890820] 1 0 0 0 0 0 0 00 +[ 1.890834] 0 0 0 0 0 1 1 31 +[ 1.890848] 0 0 0 0 0 1 1 30 +[ 1.890861] 0 0 0 0 0 1 1 33 +[ 1.890875] 1 0 0 0 0 1 1 34 +[ 1.890889] 1 1 0 0 0 1 1 35 +[ 1.890902] 0 0 0 0 0 1 1 36 +[ 1.890915] 0 0 0 0 0 1 1 37 +[ 1.890928] 0 0 0 0 0 1 1 38 +[ 1.890942] 0 1 0 0 0 1 1 39 +[ 1.890955] 1 1 0 0 0 1 1 3A +[ 1.890969] 1 1 0 0 0 1 1 3B +[ 1.890982] 0 0 0 0 0 1 1 3C +[ 1.890996] 0 0 0 0 0 1 1 3D +[ 1.891029] 0 0 0 0 0 1 1 3E +[ 1.891043] 0 0 0 0 0 1 1 3F +[ 1.891057] 1 0 0 0 0 0 0 00 +[ 1.891071] 1 0 0 0 0 0 0 00 +[ 1.891084] 1 0 0 0 0 0 0 00 +[ 1.891098] 1 0 0 0 0 0 0 00 +[ 1.891112] 1 0 0 0 0 0 0 00 +[ 1.891125] 1 0 0 0 0 0 0 00 +[ 1.891138] 1 0 0 0 0 0 0 00 +[ 1.891152] 1 0 0 0 0 0 0 00 +[ 1.891152] IRQ to pin mappings: +[ 1.891155] IRQ0 -> 0:2 +[ 1.891156] IRQ1 -> 0:1 +[ 1.891158] IRQ3 -> 0:3 +[ 1.891159] IRQ4 -> 0:4 +[ 1.891161] IRQ5 -> 0:5 +[ 1.891162] IRQ6 -> 0:6 +[ 1.891165] IRQ7 -> 0:7 +[ 1.891167] IRQ8 -> 0:8 +[ 1.891169] IRQ9 -> 0:9 +[ 1.891170] IRQ10 -> 0:10 +[ 1.891172] IRQ11 -> 0:11 +[ 1.891173] IRQ12 -> 0:12 +[ 1.891175] IRQ13 -> 0:13 +[ 1.891184] IRQ14 -> 0:14 +[ 1.891185] IRQ15 -> 0:15 +[ 1.891186] .................................... done. +[ 1.891432] registered taskstats version 1 +[ 1.891433] kAFS: Red Hat AFS client v0.1 registering. +[ 1.928863] Key type encrypted registered +[ 1.929887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found +[ 1.930474] EDD information not available. +[ 1.934906] 8021q: adding VLAN 0 to HW filter on device eth0 +[ 1.935578] IP-Config: Failed to open gretap0 +[ 1.946059] Sending DHCP requests . +[ 2.297875] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 +[ 3.936905] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX +., OK +[ 4.760077] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 +[ 4.761125] IP-Config: Complete: +[ 4.761427] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 +[ 4.762287] host=vm-vp-quantal-x86_64-2, domain=, nis-domain=(none) +[ 4.762882] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= +[ 4.763432] nameserver0=10.0.2.3 +[ 4.770395] Freeing unused kernel memory: 2824k freed +[ 4.771680] Write protecting the kernel read-only data: 12288k +[ 4.779402] Freeing unused kernel memory: 1968k freed +[ 4.783989] Freeing unused kernel memory: 1212k freed +[ 4.798890] hostname (124) used greatest stack depth: 5712 bytes left +[ 4.872775] init: Failed to create pty - disabling logging for job +[ 4.873850] init: Temporary process spawn error: No space left on device +[ 4.955413] 00-header (177) used greatest stack depth: 5592 bytes left +[ 4.962511] udevd[193]: starting version 175 +udevd[205]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory +udevd[207]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory +udevd[218]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00': No such file or directory +udevd[221]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory +udevd[226]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80': No such file or directory +udevd[217]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory +udevd[232]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001013d000000B8sv00001AF4sd00001100bc03sc00i00': No such file or directory +udevd[208]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0019v0000p0001e0000-e0,1,k74,ramlsfw': No such file or directory +udevd[224]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory +udevd[236]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory +udevd[237]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory +udevd[239]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:Fixed MDIO bus': No such file or directory +udevd[240]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory +udevd[241]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory +udevd[242]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory +udevd[235]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory +udevd[238]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:regulatory': No such file or directory +udevd[243]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory +udevd[246]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory +udevd[244]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory +udevd[245]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0002p0006e0000-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw': No such file or directory +udevd[247]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory +udevd[275]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory +udevd[276]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory +udevd[277]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory +udevd[278]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory +udevd[279]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory +udevd[280]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory +udevd[282]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv x86cpu:vendor:00FF:family:0006:model:0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,0020,0022,0023,0024,0025,0026,0027,0028,0029,002B,002D,002F,0030,0034,0037,0038,003D,0074,0080,008D,0095,0097,009F,00C0 +': No such file or directory +udevd[284]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv spi:mtd_dataflash': No such file or directory +udevd[283]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv x86cpu:vendor:00FF:family:0006:model:0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,0020,0022,0023,0024,0025,0026,0027,0028,0029,002B,002D,002F,0030,0034,0037,0038,003D,0074,0080,008D,0095,0097,009F,00C0 +': No such file or directory +udevd[285]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv dmi:bvnSeaBIOS:bvr1.7.5-20140531_083030-gandalf:bd04/01/2014:svnQEMU:pnStandardPC(i440FX+PIIX,1996):pvrpc-i440fx-2.1:cvnQEMU:ct1:cvrpc-i440fx-2.1:': No such file or directory +start: Job is already running: rc +PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin + +==> /tmp/lkp/stdout <== + +==> /tmp/lkp/stderr <== +==> /tmp/lkp/stdout <== + +==> /tmp/lkp/stderr <== +LKP: HOSTNAME localhost.localdomain, MAC 52:54:00:12:34:56, kernel 3.9.0-rc3-00755-gc544193 34, serial console /dev/ttyS0 + +==> /tmp/lkp/stdout <== +Kernel tests: Boot OK! + +==> /tmp/lkp/stdout <== +Kernel tests: Boot OK! + +==> /tmp/lkp/stderr <== +hostname: +==> /tmp/lkp/stderr <== +hostname: the specified hostname is invalidthe specified hostname is invalid + + +==> /tmp/lkp/stdout <== +/lkp/lkp/src/bin/run-lkp + +==> /tmp/lkp/stdout <== +/lkp/lkp/src/bin/run-lkp +RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 +RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 +job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml +job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml + +==> /tmp/lkp/stderr <== +grep: +==> /tmp/lkp/stderr <== +grep: /etc/os-release/etc/os-release: No such file or directory: No such file or directory + +/lkp/lkp/src/lib/bootstrap.sh: line 215: mount.nfs: command not found +/lkp/lkp/src/lib/bootstrap.sh: line 215: mount.nfs: command not found +[ 14.907216] BUG: unable to handle kernel paging request at ffffffff776a64b0 +[ 14.908009] IP: [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 +[ 14.908009] PGD 1c08067 PUD 0 +[ 14.908009] Oops: 0000 [#1] SMP +[ 14.908009] CPU 0 +[ 14.908009] Pid: 409, comm: trinity-main Not tainted 3.9.0-rc3-00755-gc544193 #34 QEMU Standard PC (i440FX + PIIX, 1996) +[ 14.908009] RIP: 0010:[<ffffffff810e132d>] [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 +[ 14.908009] RSP: 0018:ffff88000d083de8 EFLAGS: 00010283 +[ 14.908009] RAX: 0000000000000002 RBX: 0000000000000000 RCX: ffff88000d241c07 +[ 14.908009] RDX: 0000000000000002 RSI: 0000000000000002 RDI: ffffffff776a64b0 +[ 14.908009] RBP: ffff88000d083e10 R08: 0000000000000001 R09: 0000000000000275 +[ 14.908009] R10: 0000000000000000 R11: 0000000000000002 R12: ffffffffff4dade7 +[ 14.908009] R13: ffff880015483800 R14: 0000000000000002 R15: fffffffffffffff4 +[ 14.908009] FS: 00007f1463805700(0000) GS:ffff880014a00000(0000) knlGS:0000000000000000 +[ 14.908009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 +[ 14.908009] CR2: ffffffff776a64b0 CR3: 00000000154df000 CR4: 00000000000006b0 +[ 14.908009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 +[ 14.908009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 +[ 14.908009] Process trinity-main (pid: 409, threadinfo ffff88000d082000, task ffff88000d241420) +[ 14.908009] Stack: +[ 14.908009] ffffffff810d9abd ffffffff81c5ba40 ffff880015483800 0000000000000000 +[ 14.908009] ffff88000d241420 ffff88000d083e40 ffffffff810dd81d ffffffff81c5ba40 +[ 14.908009] ffff880015483800 ffff88000d083ef0 0000000000000000 ffff88000d083e98 +[ 14.908009] Call Trace: +[ 14.908009] [<ffffffff810d9abd>] ? perf_swevent_init+0xe2/0x103 +[ 14.908009] [<ffffffff810dd81d>] perf_init_event+0xaa/0xf6 +[ 14.908009] [<ffffffff810ddab8>] perf_event_alloc+0x24f/0x351 +[ 14.908009] [<ffffffff8160fbea>] ? _raw_spin_unlock+0x22/0x34 +[ 14.908009] [<ffffffff810de154>] sys_perf_event_open+0x3a1/0x86b +[ 14.908009] [<ffffffff81611029>] system_call_fastpath+0x16/0x1b +[ 14.908009] Code: 75 02 31 f6 48 89 df e8 1b ff ff ff e8 7b ff ff ff 5b 41 5c 41 5d 5d c3 55 48 83 ef 18 31 d2 31 f6 48 89 e5 e8 75 ff ff ff 5d c3 <8b> 17 85 d2 74 11 8d 4a 01 89 d0 f0 0f b1 0f 39 d0 74 3b 89 c2 +[ 14.908009] RIP [<ffffffff810e132d>] jump_label_update_timeout+0x13/0x13 +[ 14.908009] RSP <ffff88000d083de8> +[ 14.908009] CR2: ffffffff776a64b0 +[ 14.908009] ---[ end trace 481a2e63628caac9 ]--- +[ 14.908009] Kernel panic - not syncing: Fatal exception + +Elapsed time: 20 +qemu-system-x86_64 -enable-kvm -kernel /kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drbd.minor_count=8' -initrd /fs/sdf1/initrd-vm-vp-quantal-x86_64-2 -m 360 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-2 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-x86_64-2 -daemonize -display none -monitor null diff --git a/a/content_digest b/N1/content_digest index a2a398b..8853ea6 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,7 +1,10 @@ "From\0Huang Ying <ying.huang@intel.com>\0" - "Subject\0[GRE] c5441932145: IP-Config: Failed to open gretap0\0" + "Subject\0[LKP] [GRE] c5441932145: IP-Config: Failed to open gretap0\0" "Date\0Wed, 06 May 2015 11:06:33 +0800\0" - "To\0lkp@lists.01.org\0" + "To\0Pravin B Shelar <pshelar@nicira.com>\0" + "Cc\0LKML <linux-kernel@vger.kernel.org>" + David S. Miller <davem@davemloft.net> + " LKP ML <lkp@01.org>\0" "\01:1\0" "b\0" "FYI, we noticed the below changes on\n" @@ -16,13 +19,7 @@ "I think that may make some user confused.\n" "\n" "Thanks,\n" - "Ying Huang\n" - "\n" - "\n" - "\n" - "_______________________________________________\n" - "LKP mailing list\n" - LKP(a)linux.intel.com + Ying Huang "\01:2\0" "fn\0config-3.9.0-rc3-00755-gc544193\0" "b\0" @@ -2736,7 +2733,12 @@ "CONFIG_MPILIB=y\n" CONFIG_OID_REGISTRY=y "\01:3\0" - "fn\0dmesg.ksh\0" + "b\0" + "_______________________________________________\n" + "LKP mailing list\n" + LKP@linux.intel.com + "\01:4\0" + "fn\0dmesg\0" "b\0" "early console in setup code\n" "Probing EDD (edd=off to disable)... ok\n" @@ -3507,4 +3509,4 @@ "Elapsed time: 20\n" qemu-system-x86_64 -enable-kvm -kernel /kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-2/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-nexs0-04161539-c54419321455631079c7d6e60bc732dd0c5914c5-1-20150503-36367-707aua.yaml ARCH=x86_64 kconfig=x86_64-randconfig-nexs0-04161539 branch=linus/master commit=c54419321455631079c7d6e60bc732dd0c5914c5 BOOT_IMAGE=/kernel/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/vmlinuz-3.9.0-rc3-00755-gc544193 RESULT_ROOT=/result/vm-vp-quantal-x86_64/boot/1/quantal-core-x86_64.cgz/x86_64-randconfig-nexs0-04161539/c54419321455631079c7d6e60bc732dd0c5914c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-2::dhcp drbd.minor_count=8' -initrd /fs/sdf1/initrd-vm-vp-quantal-x86_64-2 -m 360 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-2 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-x86_64-2 -daemonize -display none -monitor null -99a889eca6c1959d90150f2e6484c85603957daa7940ce1adec22308d05be338 +de7dd6f83dfe14fde44ece543979065a89cdee58813b3ac495f2b45d186990a3
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.