[PATCH v3 3/3] usb: xhci: remove stop device and ring doorbell in hub control and bus suspend

[Lu Baolu <baolu.lu@linux.intel.com>]

There is no need to call xhci_stop_device() and xhci_ring_device() in
hub control and bus suspend functions since all device suspend and
resume have been notified through device_suspend/device_resume interfaces.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/usb/host/xhci-hub.c | 47 ---------------------------------------------
 1 file changed, 47 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a83e82e..f12e1b7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -704,7 +704,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u32 temp, status;
 	int retval = 0;
 	__le32 __iomem **port_array;
-	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
 	u16 wake_mask = 0;
@@ -818,17 +817,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					wIndex + 1);
-			if (!slot_id) {
-				xhci_warn(xhci, "slot_id is zero\n");
-				goto error;
-			}
-			/* unlock to execute stop endpoint commands */
-			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_stop_device(xhci, slot_id, 1);
-			spin_lock_irqsave(&xhci->lock, flags);
-
 			xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
@@ -876,19 +864,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
-			if (link_state == USB_SS_PORT_LS_U3) {
-				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-						wIndex + 1);
-				if (slot_id) {
-					/* unlock to execute stop endpoint
-					 * commands */
-					spin_unlock_irqrestore(&xhci->lock,
-								flags);
-					xhci_stop_device(xhci, slot_id, 1);
-					spin_lock_irqsave(&xhci->lock, flags);
-				}
-			}
-
 			xhci_set_link_state(xhci, port_array, wIndex,
 						link_state);
 
@@ -994,14 +969,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 							XDEV_U0);
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
-
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					wIndex + 1);
-			if (!slot_id) {
-				xhci_dbg(xhci, "slot_id is zero\n");
-				goto error;
-			}
-			xhci_ring_device(xhci, slot_id);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			bus_state->port_c_suspend &= ~(1 << wIndex);
@@ -1133,20 +1100,12 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	while (port_index--) {
 		/* suspend the port if the port is not suspended */
 		u32 t1, t2;
-		int slot_id;
 
 		t1 = readl(port_array[port_index]);
 		t2 = xhci_port_state_to_neutral(t1);
 
 		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
 			xhci_dbg(xhci, "port %d not suspended\n", port_index);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					port_index + 1);
-			if (slot_id) {
-				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_stop_device(xhci, slot_id, 1);
-				spin_lock_irqsave(&xhci->lock, flags);
-			}
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
@@ -1207,7 +1166,6 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		/* Check whether need resume ports. If needed
 		   resume port and disable remote wakeup */
 		u32 temp;
-		int slot_id;
 
 		temp = readl(port_array[port_index]);
 		if (DEV_SUPERSPEED(temp))
@@ -1240,11 +1198,6 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 			/* Clear PLC */
 			xhci_test_and_clear_bit(xhci, port_array, port_index,
 						PORT_PLC);
-
-			slot_id = xhci_find_slot_id_by_port(hcd,
-					xhci, port_index + 1);
-			if (slot_id)
-				xhci_ring_device(xhci, slot_id);
 		} else
 			writel(temp, port_array[port_index]);
 	}
-- 
2.1.0