From: Anand Moon <linux.amoon@gmail.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Tomasz Figa <tomasz.figa@gmail.com>,
Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Anand Moon <linux.amoon@gmail.com>
Subject: [PATCH] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.
Date: Fri, 8 May 2015 03:18:55 +0930 [thread overview]
Message-ID: <1431020935-5025-1-git-send-email-linux.amoon@gmail.com> (raw)
Addition of CLK_RECALC_NEW_RATES flag to support Exynos5 cpu clk so that
correct divider values are re-calculated after both pre/post
clock notifiers had run for for mout_apll clock and mout_kpll clock.
Depend on https://lkml.org/lkml/2015/4/3/388
Tested on OdroidXU3 Board.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
drivers/clk/samsung/clk-exynos5420.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 462aaee..6c7458c 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -618,10 +618,10 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
MUX_F(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
MUX_F(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: linux.amoon@gmail.com (Anand Moon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.
Date: Fri, 8 May 2015 03:18:55 +0930 [thread overview]
Message-ID: <1431020935-5025-1-git-send-email-linux.amoon@gmail.com> (raw)
Addition of CLK_RECALC_NEW_RATES flag to support Exynos5 cpu clk so that
correct divider values are re-calculated after both pre/post
clock notifiers had run for for mout_apll clock and mout_kpll clock.
Depend on https://lkml.org/lkml/2015/4/3/388
Tested on OdroidXU3 Board.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
drivers/clk/samsung/clk-exynos5420.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 462aaee..6c7458c 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -618,10 +618,10 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
MUX_F(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
MUX_F(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
--
1.9.1
next reply other threads:[~2015-05-07 17:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 17:48 Anand Moon [this message]
2015-05-07 17:48 ` [PATCH] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock Anand Moon
2015-05-08 0:14 ` Krzysztof Kozlowski
2015-05-08 0:14 ` Krzysztof Kozlowski
2015-05-08 4:01 ` Anand Moon
2015-05-08 4:01 ` Anand Moon
2015-05-08 4:05 ` Krzysztof Kozlowski
2015-05-08 4:05 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431020935-5025-1-git-send-email-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=b.zolnierkie@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@codeaurora.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.