From: <gregkh@linuxfoundation.org>
To: alexander.deucher@amd.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "drm/radeon/audio: don't enable packets until the end" has been added to the 4.0-stable tree
Date: Sun, 10 May 2015 14:32:14 +0200 [thread overview]
Message-ID: <1431261134143151@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
drm/radeon/audio: don't enable packets until the end
to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-radeon-audio-don-t-enable-packets-until-the-end.patch
and it can be found in the queue-4.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 362ff251390f3d1f8fe94666f4fc4e5876381114 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 31 Mar 2015 11:43:12 -0400
Subject: drm/radeon/audio: don't enable packets until the end
From: Alex Deucher <alexander.deucher@amd.com>
commit 362ff251390f3d1f8fe94666f4fc4e5876381114 upstream.
Don't enable the audio and avi infoframes and audio stream
until all the state is set up.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/evergreen_hdmi.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -222,10 +222,6 @@ void evergreen_set_avi_packet(struct rad
WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset,
HDMI_AVI_INFO_LINE(2), /* anything other than 0 */
~HDMI_AVI_INFO_LINE_MASK);
-
- WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset,
- HDMI_AVI_INFO_SEND | /* enable AVI info frames */
- HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */
}
void dce4_hdmi_audio_set_dto(struct radeon_device *rdev,
@@ -370,9 +366,13 @@ void dce4_set_audio_packet(struct drm_en
WREG32(AFMT_AUDIO_PACKET_CONTROL2 + offset,
AFMT_AUDIO_CHANNEL_ENABLE(0xff));
+ WREG32(HDMI_AUDIO_PACKET_CONTROL + offset,
+ HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
+ HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
+
/* allow 60958 channel status and send audio packets fields to be updated */
- WREG32(AFMT_AUDIO_PACKET_CONTROL + offset,
- AFMT_AUDIO_SAMPLE_SEND | AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE);
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + offset,
+ AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE);
}
@@ -398,17 +398,16 @@ void evergreen_hdmi_enable(struct drm_en
return;
if (enable) {
- WREG32(HDMI_INFOFRAME_CONTROL1 + dig->afmt->offset,
- HDMI_AUDIO_INFO_LINE(2)); /* anything other than 0 */
-
- WREG32(HDMI_AUDIO_PACKET_CONTROL + dig->afmt->offset,
- HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
- HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
-
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
+ HDMI_AVI_INFO_SEND | /* enable AVI info frames */
+ HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */
HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ AFMT_AUDIO_SAMPLE_SEND);
} else {
+ WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ ~AFMT_AUDIO_SAMPLE_SEND);
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, 0);
}
@@ -434,6 +433,9 @@ void evergreen_dp_enable(struct drm_enco
struct radeon_connector_atom_dig *dig_connector;
uint32_t val;
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ AFMT_AUDIO_SAMPLE_SEND);
+
WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset,
EVERGREEN_DP_SEC_TIMESTAMP_MODE(1));
@@ -457,6 +459,8 @@ void evergreen_dp_enable(struct drm_enco
EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */
} else {
WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0);
+ WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ ~AFMT_AUDIO_SAMPLE_SEND);
}
dig->afmt->enabled = enable;
Patches currently in stable-queue which might be from alexander.deucher@amd.com are
queue-4.0/drm-radeon-fix-lockup-when-bos-aren-t-part-of-the-vm-on-release.patch
queue-4.0/drm-radeon-reset-bos-address-after-clearing-it.patch
queue-4.0/drm-radeon-adjust-pll-when-audio-is-not-enabled.patch
queue-4.0/drm-radeon-add-si-dpm-quirk-for-sapphire-r9-270-dual-x-2g-gddr5.patch
queue-4.0/drm-radeon-only-enable-audio-streams-if-the-monitor-supports-it.patch
queue-4.0/drm-radeon-only-mark-audio-as-connected-if-the-monitor-supports-it-v3.patch
queue-4.0/drm-radeon-drop-dce6_dp_enable.patch
queue-4.0/drm-radeon-audio-don-t-enable-packets-until-the-end.patch
queue-4.0/drm-radeon-check-new-address-before-removing-old-one.patch
queue-4.0/drm-radeon-fix-ordering-of-avi-packet-setup.patch
queue-4.0/drm-radeon-use-drm_calloc_ab-for-cs-relocs.patch
reply other threads:[~2015-05-10 20:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431261134143151@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.deucher@amd.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.