All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v3 1/7] clk: shmobile: sh73a0 common clock framework implementation
Date: Wed, 05 Nov 2014 16:02:51 +0000	[thread overview]
Message-ID: <1431489.bPNEprh65q@avalon> (raw)
In-Reply-To: <1414515736-24905-2-git-send-email-ulrich.hecht+renesas@gmail.com>

Hi Ulrich,

Thank you for the patch.

On Tuesday 28 October 2014 18:02:10 Ulrich Hecht wrote:
> Driver for the SH73A0's clocks that are too specific to be supported by a
> generic driver.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> Acked-by: Mike Turquette <mturquette@linaro.org>
> ---
>  .../bindings/clock/renesas,sh73a0-cpg-clocks.txt   |  31 ++++
>  drivers/clk/shmobile/Makefile                      |   1 +
>  drivers/clk/shmobile/clk-sh73a0.c                  | 202 ++++++++++++++++++
>  3 files changed, 234 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> create mode 100644 drivers/clk/shmobile/clk-sh73a0.c
> 
> diff --git
> a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt new
> file mode 100644
> index 0000000..6b8dece
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> @@ -0,0 +1,31 @@
> +These bindings should be considered EXPERIMENTAL for now.
> +
> +* Renesas SH73A0 Clock Pulse Generator (CPG)
> +
> +The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
> +and several fixed ratio dividers.
> +
> +Required Properties:
> +
> +  - compatible: Must be "renesas,sh73a0-cpg-clocks"
> +
> +  - reg: Base address and length of the memory resource used by the CPG
> +
> +  - clocks: Reference to the parent clocks

Could you please list the parent clocks here ?

> +  - #clock-cells: Must be 1
> +  - clock-output-names: The names of the clocks. Supported clocks are
> "main", +    "pll0", "pll1", "pll2", "pll3", "z", "dsi0phy", "dsi1phy", and
> "twd"

This doesn't match the definitions in the CPG bits, not the values added to 
arch/arm/boot/dts/sh73a0.dtsi in patch 3/7. I think the documentation just 
need to be updated to reflect the implementation.

> +
> +
> +Example
> +-------
> +
> +        cpg_clocks: cpg_clocks@e6150000 {
> +                compatible = "renesas,sh73a0-cpg-clocks";
> +                reg = <0 0xe6150000 0 0x10000>;
> +                clocks = <&extal1_clk>, <&extal2_clk>;
> +                #clock-cells = <1>;
> +                clock-output-names = "main", "pll0", "pll1", "pll2",
> +                                     "pll3", "z", "dsi0phy", "dsi1phy",
> +                                     "twd";
> +        };
> diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
> index 960bf22..f83980f 100644
> --- a/drivers/clk/shmobile/Makefile
> +++ b/drivers/clk/shmobile/Makefile
> @@ -5,5 +5,6 @@ obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
>  obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
>  obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
>  obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
> +obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o
>  obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
>  obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
> diff --git a/drivers/clk/shmobile/clk-sh73a0.c
> b/drivers/clk/shmobile/clk-sh73a0.c new file mode 100644
> index 0000000..9d45e9d
> --- /dev/null
> +++ b/drivers/clk/shmobile/clk-sh73a0.c
> @@ -0,0 +1,202 @@
> +/*
> + * sh73a0 Core CPG Clocks
> + *
> + * Copyright (C) 2014  Ulrich Hecht
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/shmobile.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/spinlock.h>
> +
> +struct sh73a0_cpg {
> +	struct clk_onecell_data data;
> +	spinlock_t lock;
> +	void __iomem *reg;
> +};
> +
> +#define CPG_FRQCRA	0x00
> +#define CPG_FRQCRB	0x04
> +#define CPG_SD0CKCR	0x74
> +#define CPG_SD1CKCR	0x78
> +#define CPG_SD2CKCR	0x7c
> +#define CPG_PLLECR	0xd0
> +#define CPG_PLL0CR	0xd8
> +#define CPG_PLL1CR	0x28
> +#define CPG_PLL2CR	0x2c
> +#define CPG_PLL3CR	0xdc
> +#define CPG_CKSCR	0xc0
> +#define CPG_DSI0PHYCR	0x6c
> +#define CPG_DSI1PHYCR	0x70
> +
> +#define CLK_ENABLE_ON_INIT BIT(0)
> +
> +struct div4_clk {
> +	const char *name;
> +	const char *parent;
> +	unsigned int reg;
> +	unsigned int shift;
> +	unsigned int mask;
> +	int flags;
> +};
> +
> +static struct div4_clk div4_clks[] = {
> +	{ "zg", "pll0", CPG_FRQCRA, 16, 0x0d7f, CLK_ENABLE_ON_INIT },
> +	{ "m3", "pll1", CPG_FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT },
> +	{ "b",  "pll1", CPG_FRQCRA,  8, 0x0dff, CLK_ENABLE_ON_INIT },
> +	{ "m1", "pll1", CPG_FRQCRA,  4, 0x1dff, 0 },
> +	{ "m2", "pll1", CPG_FRQCRA,  0, 0x1dff, 0 },
> +	{ "z",  "pll0", CPG_FRQCRB, 24, 0x097f, 0 },
> +	{ "zx", "pll1", CPG_FRQCRB, 12, 0x0dff, 0 },
> +	{ "hp", "pll1", CPG_FRQCRB,  4, 0x0dff, 0 },
> +	{ NULL, 0, 0, 0, 0 },
> +};
> +
> +static const struct clk_div_table div4_div_table[] = {
> +	{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
> +	{ 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 },
> +	{ 12, 7 }, { 0, 0 }
> +};
> +
> +static struct clk * __init
> +sh73a0_cpg_register_clock(struct device_node *np, struct sh73a0_cpg *cpg,
> +			     const char *name)
> +{
> +	const struct clk_div_table *table = NULL;
> +	const char *parent_name;
> +	unsigned int shift, reg;
> +	unsigned int mult = 1;
> +	unsigned int div = 1;
> +
> +	if (!strcmp(name, "main")) {
> +		/* extal1, extal1_div2, extal2, extal2_div2 */
> +		parent_name = of_clk_get_parent_name(np,
> +			(clk_readl(cpg->reg + CPG_CKSCR) >> 28) & 3);
> +	} else if (!strncmp(name, "pll", 3)) {
> +		void __iomem *enable_reg = cpg->reg;
> +		u32 enable_bit = name[3] - '0';
> +
> +		parent_name = "main";
> +		switch (enable_bit) {
> +		case 0:
> +			enable_reg += CPG_PLL0CR;
> +			break;
> +		case 1:
> +			enable_reg += CPG_PLL1CR;
> +			break;
> +		case 2:
> +			enable_reg += CPG_PLL2CR;
> +			break;
> +		case 3:
> +			enable_reg += CPG_PLL3CR;
> +			break;
> +		default:
> +			return ERR_PTR(-EINVAL);
> +		}
> +		if (clk_readl(cpg->reg + CPG_PLLECR) & BIT(enable_bit)) {
> +			mult = ((clk_readl(enable_reg) >> 24) & 0x3f) + 1;
> +			/* handle CFG bit for PLL1 and PLL2 */
> +			if (enable_bit = 1 || enable_bit = 2)
> +				if (clk_readl(enable_reg) & BIT(20))
> +					mult *= 2;
> +		}
> +	} else if (!strcmp(name, "dsi0phy") || !strcmp(name, "dsi1phy")) {
> +		u32 phy_no = name[3] - '0';
> +		void __iomem *dsi_reg = cpg->reg +
> +			(phy_no ? CPG_DSI1PHYCR : CPG_DSI0PHYCR);
> +
> +		parent_name = phy_no ? "dsi1pck" : "dsi0pck";
> +		div = __raw_readl(dsi_reg);
> +		if (!(div & 0xb8000))
> +			div = 1;
> +		else
> +			div = (div & 0x3f) + 1;
> +	} else {
> +		struct div4_clk *c;
> +
> +		for (c = div4_clks; c->name; c++) {
> +			if (!strcmp(name, c->name)) {
> +				parent_name = c->parent;
> +				table = div4_div_table;
> +				reg = c->reg;
> +				shift = c->shift;
> +				break;
> +			}
> +		}
> +		if (!c->name)
> +			return ERR_PTR(-EINVAL);
> +	}
> +
> +	if (!table) {
> +		return clk_register_fixed_factor(NULL, name, parent_name, 0,
> +						 mult, div);
> +	} else {
> +		return clk_register_divider_table(NULL, name, parent_name, 0,
> +						  cpg->reg + reg, shift, 4, 0,
> +						  table, &cpg->lock);
> +	}
> +}
> +
> +static void __init sh73a0_cpg_clocks_init(struct device_node *np)
> +{
> +	struct sh73a0_cpg *cpg;
> +	struct clk **clks;
> +	unsigned int i;
> +	int num_clks;
> +
> +	num_clks = of_property_count_strings(np, "clock-output-names");
> +	if (num_clks < 0) {
> +		pr_err("%s: failed to count clocks\n", __func__);
> +		return;
> +	}
> +
> +	cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
> +	clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
> +	if (cpg = NULL || clks = NULL) {
> +		/* We're leaking memory on purpose, there's no point in cleaning
> +		 * up as the system won't boot anyway.
> +		 */
> +		return;
> +	}
> +
> +	spin_lock_init(&cpg->lock);
> +
> +	cpg->data.clks = clks;
> +	cpg->data.clk_num = num_clks;
> +
> +	cpg->reg = of_iomap(np, 0);
> +	if (WARN_ON(cpg->reg = NULL))
> +		return;
> +
> +	/* Set SDHI clocks to a known state */
> +	clk_writel(0x108, cpg->reg + CPG_SD0CKCR);
> +	clk_writel(0x108, cpg->reg + CPG_SD1CKCR);
> +	clk_writel(0x108, cpg->reg + CPG_SD2CKCR);
> +
> +	for (i = 0; i < num_clks; ++i) {
> +		const char *name;
> +		struct clk *clk;
> +
> +		of_property_read_string_index(np, "clock-output-names", i,
> +					      &name);
> +
> +		clk = sh73a0_cpg_register_clock(np, cpg, name);
> +		if (IS_ERR(clk))
> +			pr_err("%s: failed to register %s %s clock (%ld)\n",
> +			       __func__, np->name, name, PTR_ERR(clk));
> +		else
> +			cpg->data.clks[i] = clk;
> +	}
> +
> +	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
> +}
> +CLK_OF_DECLARE(sh73a0_cpg_clks, "renesas,sh73a0-cpg-clocks",
> +	       sh73a0_cpg_clocks_init);

-- 
Regards,

Laurent Pinchart


  reply	other threads:[~2014-11-05 16:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-28 17:02 [PATCH v3 1/7] clk: shmobile: sh73a0 common clock framework implementation Ulrich Hecht
2014-11-05 16:02 ` Laurent Pinchart [this message]
2014-11-06  1:36 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431489.bPNEprh65q@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.