From: <gregkh@linuxfoundation.org>
To: lv.zheng@intel.com, dirk.behme@gmail.com,
george_davis@mentor.com, gregkh@linuxfoundation.org,
rafael.j.wysocki@intel.com, robert.moore@intel.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ACPICA: Utilities: Cleanup to convert physical address printing formats." has been added to the 4.0-stable tree
Date: Fri, 15 May 2015 13:47:36 -0700 [thread overview]
Message-ID: <1431722856200117@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ACPICA: Utilities: Cleanup to convert physical address printing formats.
to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
acpica-utilities-cleanup-to-convert-physical-address-printing-formats.patch
and it can be found in the queue-4.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 Mon Sep 17 00:00:00 2001
From: Lv Zheng <lv.zheng@intel.com>
Date: Mon, 13 Apr 2015 11:48:46 +0800
Subject: ACPICA: Utilities: Cleanup to convert physical address printing formats.
From: Lv Zheng <lv.zheng@intel.com>
commit cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 upstream.
ACPICA commit 7f06739db43a85083a70371c14141008f20b2198
For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.
This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.
Link: https://github.com/acpica/acpica/commit/7f06739d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/acpica/exfldio.c | 10 ++++------
drivers/acpi/acpica/hwvalid.c | 16 ++++++++--------
drivers/acpi/acpica/nsdump.c | 7 +++----
drivers/acpi/acpica/tbinstal.c | 15 +++++++++------
drivers/acpi/acpica/utaddress.c | 34 +++++++++++++++-------------------
5 files changed, 39 insertions(+), 43 deletions(-)
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -263,17 +263,15 @@ acpi_ex_access_region(union acpi_operand
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_BFIELD,
- " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %p\n",
+ " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %8.8X%8.8X\n",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id,
obj_desc->common_field.access_byte_width,
obj_desc->common_field.base_byte_offset,
- field_datum_byte_offset, ACPI_CAST_PTR(void,
- (rgn_desc->
- region.
- address +
- region_offset))));
+ field_datum_byte_offset,
+ ACPI_FORMAT_UINT64(rgn_desc->region.address +
+ region_offset)));
/* Invoke the appropriate address_space/op_region handler */
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -142,17 +142,17 @@ acpi_hw_validate_io_request(acpi_io_addr
byte_width = ACPI_DIV_8(bit_width);
last_address = address + byte_width - 1;
- ACPI_DEBUG_PRINT((ACPI_DB_IO, "Address %p LastAddress %p Length %X",
- ACPI_CAST_PTR(void, address), ACPI_CAST_PTR(void,
- last_address),
- byte_width));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(last_address), byte_width));
/* Maximum 16-bit address in I/O space */
if (last_address > ACPI_UINT16_MAX) {
ACPI_ERROR((AE_INFO,
- "Illegal I/O port address/length above 64K: %p/0x%X",
- ACPI_CAST_PTR(void, address), byte_width));
+ "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
+ ACPI_FORMAT_UINT64(address), byte_width));
return_ACPI_STATUS(AE_LIMIT);
}
@@ -181,8 +181,8 @@ acpi_hw_validate_io_request(acpi_io_addr
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
+ "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_FORMAT_UINT64(address),
byte_width, port_info->name,
port_info->start,
port_info->end));
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -271,12 +271,11 @@ acpi_ns_dump_one_object(acpi_handle obj_
switch (type) {
case ACPI_TYPE_PROCESSOR:
- acpi_os_printf("ID %02X Len %02X Addr %p\n",
+ acpi_os_printf("ID %02X Len %02X Addr %8.8X%8.8X\n",
obj_desc->processor.proc_id,
obj_desc->processor.length,
- ACPI_CAST_PTR(void,
- obj_desc->processor.
- address));
+ ACPI_FORMAT_UINT64(obj_desc->processor.
+ address));
break;
case ACPI_TYPE_DEVICE:
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -187,8 +187,9 @@ acpi_tb_install_fixed_table(acpi_physica
status = acpi_tb_acquire_temp_table(&new_table_desc, address,
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
- ACPI_PHYSADDR_TO_PTR(address)));
+ ACPI_ERROR((AE_INFO,
+ "Could not acquire table length at %8.8X%8.8X",
+ ACPI_FORMAT_UINT64(address)));
return_ACPI_STATUS(status);
}
@@ -246,8 +247,9 @@ acpi_tb_install_standard_table(acpi_phys
status = acpi_tb_acquire_temp_table(&new_table_desc, address, flags);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
- ACPI_PHYSADDR_TO_PTR(address)));
+ ACPI_ERROR((AE_INFO,
+ "Could not acquire table length at %8.8X%8.8X",
+ ACPI_FORMAT_UINT64(address)));
return_ACPI_STATUS(status);
}
@@ -258,9 +260,10 @@ acpi_tb_install_standard_table(acpi_phys
if (!reload &&
acpi_gbl_disable_ssdt_table_install &&
ACPI_COMPARE_NAME(&new_table_desc.signature, ACPI_SIG_SSDT)) {
- ACPI_INFO((AE_INFO, "Ignoring installation of %4.4s at %p",
+ ACPI_INFO((AE_INFO,
+ "Ignoring installation of %4.4s at %8.8X%8.8X",
new_table_desc.signature.ascii,
- ACPI_PHYSADDR_TO_PTR(address)));
+ ACPI_FORMAT_UINT64(address)));
goto release_and_exit;
}
--- a/drivers/acpi/acpica/utaddress.c
+++ b/drivers/acpi/acpica/utaddress.c
@@ -107,10 +107,10 @@ acpi_ut_add_address_range(acpi_adr_space
acpi_gbl_address_range_list[space_id] = range_info;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "\nAdded [%4.4s] address range: 0x%p-0x%p\n",
+ "\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->region_node),
- ACPI_CAST_PTR(void, address),
- ACPI_CAST_PTR(void, range_info->end_address)));
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(range_info->end_address)));
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(AE_OK);
@@ -160,15 +160,13 @@ acpi_ut_remove_address_range(acpi_adr_sp
}
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "\nRemoved [%4.4s] address range: 0x%p-0x%p\n",
+ "\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->
region_node),
- ACPI_CAST_PTR(void,
- range_info->
- start_address),
- ACPI_CAST_PTR(void,
- range_info->
- end_address)));
+ ACPI_FORMAT_UINT64(range_info->
+ start_address),
+ ACPI_FORMAT_UINT64(range_info->
+ end_address)));
ACPI_FREE(range_info);
return_VOID;
@@ -245,16 +243,14 @@ acpi_ut_check_address_range(acpi_adr_spa
region_node);
ACPI_WARNING((AE_INFO,
- "%s range 0x%p-0x%p conflicts with OpRegion 0x%p-0x%p (%s)",
+ "%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)",
acpi_ut_get_region_name(space_id),
- ACPI_CAST_PTR(void, address),
- ACPI_CAST_PTR(void, end_address),
- ACPI_CAST_PTR(void,
- range_info->
- start_address),
- ACPI_CAST_PTR(void,
- range_info->
- end_address),
+ ACPI_FORMAT_UINT64(address),
+ ACPI_FORMAT_UINT64(end_address),
+ ACPI_FORMAT_UINT64(range_info->
+ start_address),
+ ACPI_FORMAT_UINT64(range_info->
+ end_address),
pathname));
ACPI_FREE(pathname);
}
Patches currently in stable-queue which might be from lv.zheng@intel.com are
queue-4.0/acpica-utilities-cleanup-to-enforce-acpi_physaddr_to_ptr-acpi_ptr_to_physaddr.patch
queue-4.0/acpica-utilities-cleanup-to-convert-physical-address-printing-formats.patch
queue-4.0/acpica-tables-change-acpi_find_root_pointer-to-use-acpi_physical_address.patch
queue-4.0/acpica-utilities-cleanup-to-remove-useless-acpi_printf-format_xxx-helpers.patch
reply other threads:[~2015-05-15 20:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431722856200117@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dirk.behme@gmail.com \
--cc=george_davis@mentor.com \
--cc=lv.zheng@intel.com \
--cc=rafael.j.wysocki@intel.com \
--cc=robert.moore@intel.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.