From: Mathieu Olivari <mathieu@codeaurora.org>
To: peppe.cavallaro@st.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Mathieu Olivari <mathieu@codeaurora.org>
Subject: [PATCH] net: stmmac: create one debugfs dir per net-device
Date: Fri, 22 May 2015 19:03:29 -0700 [thread overview]
Message-ID: <1432346609-2961-1-git-send-email-mathieu@codeaurora.org> (raw)
stmmac DebugFS entries are currently global to the driver. As a result,
having more than one stmmac device in the system creates the following
error:
* ERROR stmmaceth, debugfs create directory failed
* stmmac_hw_setup: failed debugFS registration
This also results in being able to access the debugfs information for
the first registered device only.
This patch changes the debugfs structure to have one sub-directory per
net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up
under /sys/kernel/debug/stmmaceth/ethN/.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 76 ++++++++++++++++-------
2 files changed, 59 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9cbcae2..1f3b33a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -125,6 +125,12 @@ struct stmmac_priv {
int use_riwt;
int irq_wake;
spinlock_t ptp_lock;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbgfs_dir;
+ struct dentry *dbgfs_rings_status;
+ struct dentry *dbgfs_dma_cap;
+#endif
};
int stmmac_mdio_unregister(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c46178c..a515673 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -119,7 +119,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
#ifdef CONFIG_DEBUG_FS
static int stmmac_init_fs(struct net_device *dev);
-static void stmmac_exit_fs(void);
+static void stmmac_exit_fs(struct net_device *dev);
#endif
#define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
@@ -1922,7 +1922,7 @@ static int stmmac_release(struct net_device *dev)
netif_carrier_off(dev);
#ifdef CONFIG_DEBUG_FS
- stmmac_exit_fs();
+ stmmac_exit_fs(dev);
#endif
stmmac_release_ptp(priv);
@@ -2514,8 +2514,6 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
#ifdef CONFIG_DEBUG_FS
static struct dentry *stmmac_fs_dir;
-static struct dentry *stmmac_rings_status;
-static struct dentry *stmmac_dma_cap;
static void sysfs_display_ring(void *head, int size, int extend_desc,
struct seq_file *seq)
@@ -2654,36 +2652,39 @@ static const struct file_operations stmmac_dma_cap_fops = {
static int stmmac_init_fs(struct net_device *dev)
{
- /* Create debugfs entries */
- stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Create per netdev entries */
+ priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
- if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
- pr_err("ERROR %s, debugfs create directory failed\n",
- STMMAC_RESOURCE_NAME);
+ if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) {
+ pr_err("ERROR %s/%s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME, dev->name);
return -ENOMEM;
}
/* Entry to report DMA RX/TX rings */
- stmmac_rings_status = debugfs_create_file("descriptors_status",
- S_IRUGO, stmmac_fs_dir, dev,
- &stmmac_rings_status_fops);
+ priv->dbgfs_rings_status =
+ debugfs_create_file("descriptors_status", S_IRUGO,
+ priv->dbgfs_dir, dev,
+ &stmmac_rings_status_fops);
- if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) {
+ if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) {
pr_info("ERROR creating stmmac ring debugfs file\n");
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
/* Entry to report the DMA HW features */
- stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir,
- dev, &stmmac_dma_cap_fops);
+ priv->dbgfs_dma_cap = debugfs_create_file("dma_cap", S_IRUGO,
+ priv->dbgfs_dir,
+ dev, &stmmac_dma_cap_fops);
- if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) {
+ if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) {
pr_info("ERROR creating stmmac MMC debugfs file\n");
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
@@ -2691,11 +2692,11 @@ static int stmmac_init_fs(struct net_device *dev)
return 0;
}
-static void stmmac_exit_fs(void)
+static void stmmac_exit_fs(struct net_device *dev)
{
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_dma_cap);
- debugfs_remove(stmmac_fs_dir);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ debugfs_remove_recursive(priv->dbgfs_dir);
}
#endif /* CONFIG_DEBUG_FS */
@@ -3163,6 +3164,35 @@ err:
__setup("stmmaceth=", stmmac_cmdline_opt);
#endif /* MODULE */
+static int __init stmmac_init(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ /* Create debugfs main directory if it doesn't exist yet */
+ if (!stmmac_fs_dir) {
+ stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+
+ if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
+ pr_err("ERROR %s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME);
+
+ return -ENOMEM;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(stmmac_fs_dir);
+#endif
+}
+
+module_init(stmmac_init)
+module_exit(stmmac_exit)
+
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
--
2.1.4
next reply other threads:[~2015-05-23 2:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-23 2:03 Mathieu Olivari [this message]
2015-05-25 21:38 ` [PATCH] net: stmmac: create one debugfs dir per net-device David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432346609-2961-1-git-send-email-mathieu@codeaurora.org \
--to=mathieu@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.