Re: [PATCH 1/9] input: goodix: fix alignment issues

[Bastien Nocera <hadess@hadess.net>]

On Thu, 2015-05-28 at 15:47 +0300, Irina Tirdea wrote:
> Fix alignment to match open parenthesis detected by
> running checkpatch.pl --strict.
> 
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>

Looks innocuous enough.

Acked-by: Bastien Nocera <hadess@hadess.net>

> ---
>  drivers/input/touchscreen/goodix.c | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/goodix.c 
> b/drivers/input/touchscreen/goodix.c
> index 0d93b1e..c2e785c 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -69,7 +69,7 @@ static const unsigned long goodix_irq_flags[] = {
>   * @len: length of the buffer to write
>   */
>  static int goodix_i2c_read(struct i2c_client *client,
> -                             u16 reg, u8 *buf, int len)
> +                        u16 reg, u8 *buf, int len)
>  {
>       struct i2c_msg msgs[2];
>       u16 wbuf = cpu_to_be16(reg);
> @@ -78,7 +78,7 @@ static int goodix_i2c_read(struct i2c_client 
> *client,
>       msgs[0].flags = 0;
>       msgs[0].addr  = client->addr;
>       msgs[0].len   = 2;
> -     msgs[0].buf   = (u8 *) &wbuf;
> +     msgs[0].buf   = (u8 *)&wbuf;
>  
>       msgs[1].flags = I2C_M_RD;
>       msgs[1].addr  = client->addr;
> @@ -112,7 +112,7 @@ static int goodix_ts_read_input_report(struct 
> goodix_ts_data *ts, u8 *data)
>               data += 1 + GOODIX_CONTACT_SIZE;
>               error = goodix_i2c_read(ts->client,
>                                       GOODIX_READ_COOR_ADDR +
> -                                             1 + 
> GOODIX_CONTACT_SIZE,
> +                                     1 + GOODIX_CONTACT_SIZE,
>                                       data,
>                                       GOODIX_CONTACT_SIZE * 
> (touch_num - 1));
>               if (error)
> @@ -157,7 +157,8 @@ static void goodix_process_events(struct 
> goodix_ts_data *ts)
>  
>       for (i = 0; i < touch_num; i++)
>               goodix_ts_report_touch(ts,
> -                             &point_data[1 + GOODIX_CONTACT_SIZE 
> * i]);
> +                                    &point_data[1 +
> +                                    GOODIX_CONTACT_SIZE * i]);
>  
>       input_mt_sync_frame(ts->input_dev);
>       input_sync(ts->input_dev);
> @@ -199,8 +200,8 @@ static void goodix_read_config(struct 
> goodix_ts_data *ts)
>       int error;
>  
>       error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
> -                           config,
> -                        GOODIX_CONFIG_MAX_LENGTH);
> +                             config,
> +                             GOODIX_CONFIG_MAX_LENGTH);
>       if (error) {
>               dev_warn(&ts->client->dev,
>                        "Error reading config (%d), using 
> defaults\n",
> @@ -297,9 +298,9 @@ static int goodix_request_input_dev(struct 
> goodix_ts_data *ts)
>                                 BIT_MASK(EV_ABS);
>  
>       input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
> -                             ts->abs_x_max, 0, 0);
> +                          ts->abs_x_max, 0, 0);
>       input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
> -                             ts->abs_y_max, 0, 0);
> +                          ts->abs_y_max, 0, 0);
>       input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 
> 255, 0, 0);
>       input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 
> 255, 0, 0);
>