From: Tiejun Chen <tiejun.chen@intel.com>
To: mst@redhat.com, pbonzini@redhat.com, rth@twiddle.net,
ehabkost@redhat.com
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] [v8][RESEND][PATCH 03/10] piix: create host bridge to passthrough
Date: Fri, 5 Jun 2015 16:44:54 +0800 [thread overview]
Message-ID: <1433493901-9332-4-git-send-email-tiejun.chen@intel.com> (raw)
In-Reply-To: <1433493901-9332-1-git-send-email-tiejun.chen@intel.com>
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
---
hw/pci-host/piix.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
include/hw/i386/pc.h | 2 ++
2 files changed, 84 insertions(+)
diff --git a/hw/pci-host/piix.c b/hw/pci-host/piix.c
index c812eaa..0906ba5 100644
--- a/hw/pci-host/piix.c
+++ b/hw/pci-host/piix.c
@@ -728,6 +728,87 @@ static const TypeInfo i440fx_info = {
.class_init = i440fx_class_init,
};
+/* IGD Passthrough Host Bridge. */
+typedef struct {
+ uint8_t offset;
+ uint8_t len;
+} IGDHostInfo;
+
+/* Here we just expose minimal host bridge offset subset. */
+static const IGDHostInfo igd_host_bridge_infos[] = {
+ {0x08, 2}, /* revision id */
+ {0x2c, 2}, /* sybsystem vendor id */
+ {0x2e, 2}, /* sybsystem id */
+ {0x50, 2}, /* SNB: processor graphics control register */
+ {0x52, 2}, /* processor graphics control register */
+ {0xa4, 4}, /* SNB: graphics base of stolen memory */
+ {0xa8, 4}, /* SNB: base of GTT stolen memory */
+};
+
+static int host_pci_config_read(int pos, int len, uint32_t val)
+{
+ char path[PATH_MAX];
+ int config_fd;
+ ssize_t size = sizeof(path);
+ /* Access real host bridge. */
+ int rc = snprintf(path, size, "/sys/bus/pci/devices/%04x:%02x:%02x.%d/%s",
+ 0, 0, 0, 0, "config");
+
+ if (rc >= size || rc < 0) {
+ return -ENODEV;
+ }
+
+ config_fd = open(path, O_RDWR);
+ if (config_fd < 0) {
+ return -ENODEV;
+ }
+
+ do {
+ rc = pread(config_fd, (uint8_t *)&val, len, pos);
+ } while (rc < 0 && (errno == EINTR || errno == EAGAIN));
+ if (rc != len) {
+ return -errno;
+ }
+
+ return 0;
+}
+
+static int igd_pt_i440fx_initfn(struct PCIDevice *pci_dev)
+{
+ uint32_t val = 0;
+ int rc, i, num;
+ int pos, len;
+
+ num = ARRAY_SIZE(igd_host_bridge_infos);
+ for (i = 0; i < num; i++) {
+ pos = igd_host_bridge_infos[i].offset;
+ len = igd_host_bridge_infos[i].len;
+ rc = host_pci_config_read(pos, len, val);
+ if (rc) {
+ return -ENODEV;
+ }
+ pci_default_write_config(pci_dev, pos, val, len);
+ }
+
+ return 0;
+}
+
+static void igd_passthrough_i440fx_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->init = igd_pt_i440fx_initfn;
+ dc->desc = "IGD Passthrough Host bridge";
+}
+
+static const TypeInfo igd_passthrough_i440fx_info = {
+ .name = TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE,
+ .parent = TYPE_I440FX_PCI_DEVICE,
+ .instance_size = sizeof(PCII440FXState),
+ .class_init = igd_passthrough_i440fx_class_init,
+};
+
static const char *i440fx_pcihost_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
@@ -769,6 +850,7 @@ static const TypeInfo i440fx_pcihost_info = {
static void i440fx_register_types(void)
{
type_register_static(&i440fx_info);
+ type_register_static(&igd_passthrough_i440fx_info);
type_register_static(&piix3_info);
type_register_static(&piix3_xen_info);
type_register_static(&i440fx_pcihost_info);
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index bb808c9..83962aa 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -232,6 +232,8 @@ typedef struct PCII440FXState PCII440FXState;
#define TYPE_I440FX_PCI_HOST_BRIDGE "i440FX-pcihost"
#define TYPE_I440FX_PCI_DEVICE "i440FX"
+#define TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE "igd-passthrough-i440FX"
+
PCIBus *i440fx_init(const char *host_type, const char *pci_type,
PCII440FXState **pi440fx_state, int *piix_devfn,
ISABus **isa_bus, qemu_irq *pic,
--
1.9.1
next prev parent reply other threads:[~2015-06-05 8:48 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-05 8:44 [Qemu-devel] [v8][RESEND][PATCH 00/10] xen: add Intel IGD passthrough Tiejun Chen
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 01/10] i440fx: make types configurable at run-time Tiejun Chen
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 02/10] pc_init1: pass parameters just with types Tiejun Chen
2015-06-05 8:44 ` Tiejun Chen [this message]
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 04/10] hw/pci-assign: split pci-assign.c Tiejun Chen
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 05/10] xen, gfx passthrough: basic graphics passthrough support Tiejun Chen
2015-07-01 15:45 ` Stefano Stabellini
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 06/10] xen, gfx passthrough: retrieve VGA BIOS to work Tiejun Chen
2015-07-01 15:51 ` Stefano Stabellini
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 07/10] igd gfx passthrough: create a isa bridge Tiejun Chen
2015-06-05 8:44 ` [Qemu-devel] [v8][RESEND][PATCH 08/10] xen, gfx passthrough: register " Tiejun Chen
2015-07-01 15:55 ` Stefano Stabellini
2015-07-03 1:51 ` Chen, Tiejun
2015-06-05 8:45 ` [Qemu-devel] [v8][RESEND][PATCH 09/10] xen, gfx passthrough: register host bridge specific to passthrough Tiejun Chen
2015-07-01 15:58 ` Stefano Stabellini
2015-07-03 3:11 ` Chen, Tiejun
2015-06-05 8:45 ` [Qemu-devel] [v8][RESEND][PATCH 10/10] xen, gfx passthrough: add opregion mapping Tiejun Chen
2015-07-01 16:01 ` Stefano Stabellini
2015-07-01 1:39 ` [Qemu-devel] [v8][RESEND][PATCH 00/10] xen: add Intel IGD passthrough Chen, Tiejun
2015-07-01 16:03 ` Stefano Stabellini
2015-07-03 3:17 ` Chen, Tiejun
2015-07-02 6:22 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433493901-9332-4-git-send-email-tiejun.chen@intel.com \
--to=tiejun.chen@intel.com \
--cc=ehabkost@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.