[PATCH 4/4] x86/asm/entry/32: Clean up entry_32.S

[Ingo Molnar <mingo@kernel.org>]

Make the 32-bit syscall entry code a bit more readable:

 - use consistent assembly coding style similar to entry_64.S

 - remove old comments that are not true anymore

 - eliminate whitespace noise

 - use consistent vertical spacing

 - fix various comments

No code changed:

  # arch/x86/entry/entry_32.o:

   text    data     bss     dec     hex filename
   6025       0       0    6025    1789 entry_32.o.before
   6025       0       0    6025    1789 entry_32.o.after

md5:
   f3fa16b2b0dca804f052deb6b30ba6cb  entry_32.o.before.asm
   f3fa16b2b0dca804f052deb6b30ba6cb  entry_32.o.after.asm

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/entry/entry_32.S | 1141 ++++++++++++++++++++++++++++++++---------------------------------
 1 file changed, 570 insertions(+), 571 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index d59461032625..edd7aadfacfa 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1,23 +1,12 @@
 /*
+ *  Copyright (C) 1991,1992  Linus Torvalds
  *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
+ * entry_32.S contains the system-call and low-level fault and trap handling routines.
  *
  * Stack layout in 'syscall_exit':
- * 	ptrace needs to have all regs on the stack.
- *	if the order here is changed, it needs to be
- *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace needs to have all registers on the stack.
+ *	If the order here is changed, it needs to be
+ *	updated in fork.c:copy_process(), signal.c:do_signal(),
  *	ptrace.c and ptrace.h
  *
  *	 0(%esp) - %ebx
@@ -37,8 +26,6 @@
  *	38(%esp) - %eflags
  *	3C(%esp) - %oldesp
  *	40(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
  */
 
 #include <linux/linkage.h>
@@ -61,11 +48,11 @@
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
 #define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE	   0x40000000
+#define __AUDIT_ARCH_LE		0x40000000
 
 #ifndef CONFIG_AUDITSYSCALL
-#define sysenter_audit	syscall_trace_entry
-#define sysexit_audit	syscall_exit_work
+# define sysenter_audit		syscall_trace_entry
+# define sysexit_audit		syscall_exit_work
 #endif
 
 	.section .entry.text, "ax"
@@ -84,16 +71,16 @@
  */
 
 #ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+# define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
 #else
-#define preempt_stop(clobbers)
-#define resume_kernel		restore_all
+# define preempt_stop(clobbers)
+# define resume_kernel		restore_all
 #endif
 
 .macro TRACE_IRQS_IRET
 #ifdef CONFIG_TRACE_IRQFLAGS
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)     # interrupts off?
-	jz 1f
+	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)     # interrupts off?
+	jz	1f
 	TRACE_IRQS_ON
 1:
 #endif
@@ -112,10 +99,10 @@
 
  /* unfortunately push/pop can't be no-op */
 .macro PUSH_GS
-	pushl $0
+	pushl	$0
 .endm
 .macro POP_GS pop=0
-	addl $(4 + \pop), %esp
+	addl	$(4 + \pop), %esp
 .endm
 .macro POP_GS_EX
 .endm
@@ -135,119 +122,119 @@
 #else	/* CONFIG_X86_32_LAZY_GS */
 
 .macro PUSH_GS
-	pushl %gs
+	pushl	%gs
 .endm
 
 .macro POP_GS pop=0
-98:	popl %gs
+98:	popl	%gs
   .if \pop <> 0
 	add $\pop, %esp
   .endif
 .endm
 .macro POP_GS_EX
 .pushsection .fixup, "ax"
-99:	movl $0, (%esp)
-	jmp 98b
+99:	movl	$0, (%esp)
+	jmp	98b
 .popsection
-	_ASM_EXTABLE(98b,99b)
+	_ASM_EXTABLE(98b, 99b)
 .endm
 
 .macro PTGS_TO_GS
-98:	mov PT_GS(%esp), %gs
+98:	mov	PT_GS(%esp), %gs
 .endm
 .macro PTGS_TO_GS_EX
 .pushsection .fixup, "ax"
-99:	movl $0, PT_GS(%esp)
-	jmp 98b
+99:	movl	$0, PT_GS(%esp)
+	jmp	98b
 .popsection
-	_ASM_EXTABLE(98b,99b)
+	_ASM_EXTABLE(98b, 99b)
 .endm
 
 .macro GS_TO_REG reg
-	movl %gs, \reg
+	movl	%gs, \reg
 .endm
 .macro REG_TO_PTGS reg
-	movl \reg, PT_GS(%esp)
+	movl	\reg, PT_GS(%esp)
 .endm
 .macro SET_KERNEL_GS reg
-	movl $(__KERNEL_STACK_CANARY), \reg
-	movl \reg, %gs
+	movl	$(__KERNEL_STACK_CANARY), \reg
+	movl	\reg, %gs
 .endm
 
-#endif	/* CONFIG_X86_32_LAZY_GS */
+#endif /* CONFIG_X86_32_LAZY_GS */
 
 .macro SAVE_ALL
 	cld
 	PUSH_GS
-	pushl %fs
-	pushl %es
-	pushl %ds
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
-	movl $(__USER_DS), %edx
-	movl %edx, %ds
-	movl %edx, %es
-	movl $(__KERNEL_PERCPU), %edx
-	movl %edx, %fs
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+	movl	$(__USER_DS), %edx
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	$(__KERNEL_PERCPU), %edx
+	movl	%edx, %fs
 	SET_KERNEL_GS %edx
 .endm
 
 .macro RESTORE_INT_REGS
-	popl %ebx
-	popl %ecx
-	popl %edx
-	popl %esi
-	popl %edi
-	popl %ebp
-	popl %eax
+	popl	%ebx
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	popl	%edi
+	popl	%ebp
+	popl	%eax
 .endm
 
 .macro RESTORE_REGS pop=0
 	RESTORE_INT_REGS
-1:	popl %ds
-2:	popl %es
-3:	popl %fs
+1:	popl	%ds
+2:	popl	%es
+3:	popl	%fs
 	POP_GS \pop
 .pushsection .fixup, "ax"
-4:	movl $0, (%esp)
-	jmp 1b
-5:	movl $0, (%esp)
-	jmp 2b
-6:	movl $0, (%esp)
-	jmp 3b
+4:	movl	$0, (%esp)
+	jmp	1b
+5:	movl	$0, (%esp)
+	jmp	2b
+6:	movl	$0, (%esp)
+	jmp	3b
 .popsection
-	_ASM_EXTABLE(1b,4b)
-	_ASM_EXTABLE(2b,5b)
-	_ASM_EXTABLE(3b,6b)
+	_ASM_EXTABLE(1b, 4b)
+	_ASM_EXTABLE(2b, 5b)
+	_ASM_EXTABLE(3b, 6b)
 	POP_GS_EX
 .endm
 
 ENTRY(ret_from_fork)
-	pushl %eax
-	call schedule_tail
+	pushl	%eax
+	call	schedule_tail
 	GET_THREAD_INFO(%ebp)
-	popl %eax
-	pushl $0x0202		# Reset kernel eflags
+	popl	%eax
+	pushl	$0x0202				# Reset kernel eflags
 	popfl
-	jmp syscall_exit
+	jmp	syscall_exit
 END(ret_from_fork)
 
 ENTRY(ret_from_kernel_thread)
-	pushl %eax
-	call schedule_tail
+	pushl	%eax
+	call	schedule_tail
 	GET_THREAD_INFO(%ebp)
-	popl %eax
-	pushl $0x0202		# Reset kernel eflags
+	popl	%eax
+	pushl	$0x0202				# Reset kernel eflags
 	popfl
-	movl PT_EBP(%esp),%eax
-	call *PT_EBX(%esp)
-	movl $0,PT_EAX(%esp)
-	jmp syscall_exit
+	movl	PT_EBP(%esp), %eax
+	call	*PT_EBX(%esp)
+	movl	$0, PT_EAX(%esp)
+	jmp	syscall_exit
 ENDPROC(ret_from_kernel_thread)
 
 /*
@@ -264,62 +251,65 @@ ENDPROC(ret_from_kernel_thread)
 ret_from_intr:
 	GET_THREAD_INFO(%ebp)
 #ifdef CONFIG_VM86
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS and CS
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
 #else
 	/*
 	 * We can be coming here from child spawned by kernel_thread().
 	 */
-	movl PT_CS(%esp), %eax
-	andl $SEGMENT_RPL_MASK, %eax
+	movl	PT_CS(%esp), %eax
+	andl	$SEGMENT_RPL_MASK, %eax
 #endif
-	cmpl $USER_RPL, %eax
-	jb resume_kernel		# not returning to v8086 or userspace
+	cmpl	$USER_RPL, %eax
+	jb	resume_kernel			# not returning to v8086 or userspace
 
 ENTRY(resume_userspace)
 	LOCKDEP_SYS_EXIT
- 	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
 	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
-					# int/exception return?
-	jne work_pending
-	jmp restore_all
+	movl	TI_flags(%ebp), %ecx
+	andl	$_TIF_WORK_MASK, %ecx		# is there any work to be done on
+						# int/exception return?
+	jne	work_pending
+	jmp	restore_all
 END(ret_from_exception)
 
 #ifdef CONFIG_PREEMPT
 ENTRY(resume_kernel)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 need_resched:
-	cmpl $0,PER_CPU_VAR(__preempt_count)
-	jnz restore_all
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
-	jz restore_all
-	call preempt_schedule_irq
-	jmp need_resched
+	cmpl	$0, PER_CPU_VAR(__preempt_count)
+	jnz	restore_all
+	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)	# interrupts off (exception path) ?
+	jz	restore_all
+	call	preempt_schedule_irq
+	jmp	need_resched
 END(resume_kernel)
 #endif
 
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
-   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
+/*
+ * SYSENTER_RETURN points to after the SYSENTER instruction
+ * in the vsyscall page.  See vsyscall-sysentry.S, which defines
+ * the symbol.
+ */
 
-	# sysenter call handler stub
+	# SYSENTER  call handler stub
 ENTRY(entry_SYSENTER_32)
-	movl TSS_sysenter_sp0(%esp),%esp
+	movl	TSS_sysenter_sp0(%esp), %esp
 sysenter_past_esp:
 	/*
 	 * Interrupts are disabled here, but we can't trace it until
 	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
 	 * we immediately enable interrupts at that point anyway.
 	 */
-	pushl $__USER_DS
-	pushl %ebp
+	pushl	$__USER_DS
+	pushl	%ebp
 	pushfl
-	orl $X86_EFLAGS_IF, (%esp)
-	pushl $__USER_CS
+	orl	$X86_EFLAGS_IF, (%esp)
+	pushl	$__USER_CS
 	/*
 	 * Push current_thread_info()->sysenter_return to the stack.
 	 * A tiny bit of offset fixup is necessary: TI_sysenter_return
@@ -328,9 +318,9 @@ ENTRY(entry_SYSENTER_32)
 	 * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
 	 * and THREAD_SIZE takes us to the bottom.
 	 */
-	pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
+	pushl	((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
 
-	pushl %eax
+	pushl	%eax
 	SAVE_ALL
 	ENABLE_INTERRUPTS(CLBR_NONE)
 
@@ -338,132 +328,134 @@ ENTRY(entry_SYSENTER_32)
  * Load the potential sixth argument from user stack.
  * Careful about security.
  */
-	cmpl $__PAGE_OFFSET-3,%ebp
-	jae syscall_fault
+	cmpl	$__PAGE_OFFSET-3, %ebp
+	jae	syscall_fault
 	ASM_STAC
-1:	movl (%ebp),%ebp
+1:	movl	(%ebp), %ebp
 	ASM_CLAC
-	movl %ebp,PT_EBP(%esp)
-	_ASM_EXTABLE(1b,syscall_fault)
+	movl	%ebp, PT_EBP(%esp)
+	_ASM_EXTABLE(1b, syscall_fault)
 
 	GET_THREAD_INFO(%ebp)
 
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz sysenter_audit
+	testl	$_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+	jnz	sysenter_audit
 sysenter_do_call:
-	cmpl $(NR_syscalls), %eax
-	jae sysenter_badsys
-	call *sys_call_table(,%eax,4)
+	cmpl	$(NR_syscalls), %eax
+	jae	sysenter_badsys
+	call	*sys_call_table(, %eax, 4)
 sysenter_after_call:
-	movl %eax,PT_EAX(%esp)
+	movl	%eax, PT_EAX(%esp)
 	LOCKDEP_SYS_EXIT
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx
-	jnz sysexit_audit
+	movl	TI_flags(%ebp), %ecx
+	testl	$_TIF_ALLWORK_MASK, %ecx
+	jnz	sysexit_audit
 sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
-	movl PT_EIP(%esp), %edx
-	movl PT_OLDESP(%esp), %ecx
-	xorl %ebp,%ebp
+	movl	PT_EIP(%esp), %edx
+	movl	PT_OLDESP(%esp), %ecx
+	xorl	%ebp, %ebp
 	TRACE_IRQS_ON
-1:	mov  PT_FS(%esp), %fs
+1:	mov	PT_FS(%esp), %fs
 	PTGS_TO_GS
 	ENABLE_INTERRUPTS_SYSEXIT
 
 #ifdef CONFIG_AUDITSYSCALL
 sysenter_audit:
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
-	/* movl PT_EAX(%esp), %eax	already set, syscall number: 1st arg to audit */
-	movl PT_EBX(%esp), %edx		/* ebx/a0: 2nd arg to audit */
-	/* movl PT_ECX(%esp), %ecx	already set, a1: 3nd arg to audit */
-	pushl PT_ESI(%esp)		/* a3: 5th arg */
-	pushl PT_EDX+4(%esp)	/* a2: 4th arg */
-	call __audit_syscall_entry
-	popl %ecx /* get that remapped edx off the stack */
-	popl %ecx /* get that remapped esi off the stack */
-	movl PT_EAX(%esp),%eax		/* reload syscall number */
-	jmp sysenter_do_call
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), TI_flags(%ebp)
+	jnz	syscall_trace_entry
+	/* movl	PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+	movl	PT_EBX(%esp), %edx		/* ebx/a0: 2nd arg to audit */
+	/* movl	PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+	pushl	PT_ESI(%esp)			/* a3: 5th arg */
+	pushl	PT_EDX+4(%esp)			/* a2: 4th arg */
+	call	__audit_syscall_entry
+	popl	%ecx				/* get that remapped edx off the stack */
+	popl	%ecx				/* get that remapped esi off the stack */
+	movl	PT_EAX(%esp), %eax		/* reload syscall number */
+	jmp	sysenter_do_call
 
 sysexit_audit:
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+	jnz	syscall_exit_work
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)
-	movl %eax,%edx		/* second arg, syscall return value */
-	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
-	setbe %al		/* 1 if so, 0 if not */
-	movzbl %al,%eax		/* zero-extend that */
-	call __audit_syscall_exit
+	movl	%eax, %edx			/* second arg, syscall return value */
+	cmpl	$-MAX_ERRNO, %eax		/* is it an error ? */
+	setbe %al				/* 1 if so, 0 if not */
+	movzbl %al, %eax			/* zero-extend that */
+	call	__audit_syscall_exit
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
-	movl PT_EAX(%esp),%eax	/* reload syscall return value */
-	jmp sysenter_exit
+	movl	TI_flags(%ebp), %ecx
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+	jnz	syscall_exit_work
+	movl	PT_EAX(%esp), %eax		/* reload syscall return value */
+	jmp	sysenter_exit
 #endif
 
-.pushsection .fixup,"ax"
-2:	movl $0,PT_FS(%esp)
-	jmp 1b
+.pushsection .fixup, "ax"
+2:	movl	$0, PT_FS(%esp)
+	jmp	1b
 .popsection
-	_ASM_EXTABLE(1b,2b)
+	_ASM_EXTABLE(1b, 2b)
 	PTGS_TO_GS_EX
 ENDPROC(entry_SYSENTER_32)
 
 	# system call handler stub
 ENTRY(entry_INT80_32)
 	ASM_CLAC
-	pushl %eax			# save orig_eax
+	pushl	%eax				# save orig_eax
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
-					# system call tracing in operation / emulation
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz syscall_trace_entry
-	cmpl $(NR_syscalls), %eax
-	jae syscall_badsys
+						# system call tracing in operation / emulation
+	testl	$_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+	jnz	syscall_trace_entry
+	cmpl	$(NR_syscalls), %eax
+	jae	syscall_badsys
 syscall_call:
-	call *sys_call_table(,%eax,4)
+	call	*sys_call_table(, %eax, 4)
 syscall_after_call:
-	movl %eax,PT_EAX(%esp)		# store the return value
+	movl	%eax, PT_EAX(%esp)		# store the return value
 syscall_exit:
 	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
 	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx	# current->work
-	jnz syscall_exit_work
+	movl	TI_flags(%ebp), %ecx
+	testl	$_TIF_ALLWORK_MASK, %ecx	# current->work
+	jnz	syscall_exit_work
 
 restore_all:
 	TRACE_IRQS_IRET
 restore_all_notrace:
 #ifdef CONFIG_X86_ESPFIX32
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
-	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
-	# are returning to the kernel.
-	# See comments in process.c:copy_thread() for details.
-	movb PT_OLDSS(%esp), %ah
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
-	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
-	je ldt_ss			# returning to user-space with LDT SS
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
+	/*
+	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+	 * are returning to the kernel.
+	 * See comments in process.c:copy_thread() for details.
+	 */
+	movb	PT_OLDSS(%esp), %ah
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	cmpl	$((SEGMENT_LDT << 8) | USER_RPL), %eax
+	je ldt_ss				# returning to user-space with LDT SS
 #endif
 restore_nocheck:
-	RESTORE_REGS 4			# skip orig_eax/error_code
+	RESTORE_REGS 4				# skip orig_eax/error_code
 irq_return:
 	INTERRUPT_RETURN
-.section .fixup,"ax"
-ENTRY(iret_exc)
-	pushl $0			# no error code
-	pushl $do_iret_error
-	jmp error_code
+.section .fixup, "ax"
+ENTRY(iret_exc	)
+	pushl	$0				# no error code
+	pushl	$do_iret_error
+	jmp	error_code
 .previous
-	_ASM_EXTABLE(irq_return,iret_exc)
+	_ASM_EXTABLE(irq_return, iret_exc)
 
 #ifdef CONFIG_X86_ESPFIX32
 ldt_ss:
@@ -476,8 +468,8 @@ ENTRY(iret_exc)
 	 * is still available to implement the setting of the high
 	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
 	 */
-	cmpl $0, pv_info+PARAVIRT_enabled
-	jne restore_nocheck
+	cmpl	$0, pv_info+PARAVIRT_enabled
+	jne	restore_nocheck
 #endif
 
 /*
@@ -492,21 +484,23 @@ ENTRY(iret_exc)
  * a base address that matches for the difference.
  */
 #define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
-	mov %esp, %edx			/* load kernel esp */
-	mov PT_OLDESP(%esp), %eax	/* load userspace esp */
-	mov %dx, %ax			/* eax: new kernel esp */
-	sub %eax, %edx			/* offset (low word is 0) */
+	mov	%esp, %edx			/* load kernel esp */
+	mov	PT_OLDESP(%esp), %eax		/* load userspace esp */
+	mov	%dx, %ax			/* eax: new kernel esp */
+	sub %eax, %edx				/* offset (low word is 0) */
 	shr $16, %edx
-	mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
-	mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
-	pushl $__ESPFIX_SS
-	pushl %eax			/* new kernel esp */
-	/* Disable interrupts, but do not irqtrace this section: we
+	mov	%dl, GDT_ESPFIX_SS + 4		/* bits 16..23 */
+	mov	%dh, GDT_ESPFIX_SS + 7		/* bits 24..31 */
+	pushl	$__ESPFIX_SS
+	pushl	%eax				/* new kernel esp */
+	/*
+	 * Disable interrupts, but do not irqtrace this section: we
 	 * will soon execute iret and the tracer was already set to
-	 * the irqstate after the iret */
+	 * the irqstate after the IRET:
+	 */
 	DISABLE_INTERRUPTS(CLBR_EAX)
-	lss (%esp), %esp		/* switch to espfix segment */
-	jmp restore_nocheck
+	lss	(%esp), %esp			/* switch to espfix segment */
+	jmp	restore_nocheck
 #endif
 ENDPROC(entry_INT80_32)
 
@@ -514,93 +508,93 @@ ENDPROC(entry_INT80_32)
 	ALIGN
 work_pending:
 	testb $_TIF_NEED_RESCHED, %cl
-	jz work_notifysig
+	jz	work_notifysig
 work_resched:
-	call schedule
+	call	schedule
 	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
 	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
-					# than syscall tracing?
-	jz restore_all
+	movl	TI_flags(%ebp), %ecx
+	andl	$_TIF_WORK_MASK, %ecx		# is there any work to be done other
+						# than syscall tracing?
+	jz	restore_all
 	testb $_TIF_NEED_RESCHED, %cl
-	jnz work_resched
+	jnz	work_resched
 
-work_notifysig:				# deal with pending signals and
-					# notify-resume requests
+work_notifysig:					# deal with pending signals and
+						# notify-resume requests
 #ifdef CONFIG_VM86
-	testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
-	movl %esp, %eax
-	jnz work_notifysig_v86		# returning to kernel-space or
-					# vm86-space
+	testl	$X86_EFLAGS_VM, PT_EFLAGS(%esp)
+	movl	%esp, %eax
+	jnz	work_notifysig_v86		# returning to kernel-space or
+						# vm86-space
 1:
 #else
-	movl %esp, %eax
+	movl	%esp, %eax
 #endif
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	movb PT_CS(%esp), %bl
+	movb	PT_CS(%esp), %bl
 	andb $SEGMENT_RPL_MASK, %bl
 	cmpb $USER_RPL, %bl
-	jb resume_kernel
-	xorl %edx, %edx
-	call do_notify_resume
-	jmp resume_userspace
+	jb	resume_kernel
+	xorl	%edx, %edx
+	call	do_notify_resume
+	jmp	resume_userspace
 
 #ifdef CONFIG_VM86
 	ALIGN
 work_notifysig_v86:
-	pushl %ecx			# save ti_flags for do_notify_resume
-	call save_v86_state		# %eax contains pt_regs pointer
-	popl %ecx
-	movl %eax, %esp
-	jmp 1b
+	pushl	%ecx				# save ti_flags for do_notify_resume
+	call	save_v86_state			# %eax contains pt_regs pointer
+	popl	%ecx
+	movl	%eax, %esp
+	jmp	1b
 #endif
 END(work_pending)
 
 	# perform syscall exit tracing
 	ALIGN
 syscall_trace_entry:
-	movl $-ENOSYS,PT_EAX(%esp)
-	movl %esp, %eax
-	call syscall_trace_enter
+	movl	$-ENOSYS, PT_EAX(%esp)
+	movl	%esp, %eax
+	call	syscall_trace_enter
 	/* What it returned is what we'll actually use.  */
-	cmpl $(NR_syscalls), %eax
-	jnae syscall_call
-	jmp syscall_exit
+	cmpl	$(NR_syscalls), %eax
+	jnae	syscall_call
+	jmp	syscall_exit
 END(syscall_trace_entry)
 
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testl $_TIF_WORK_SYSCALL_EXIT, %ecx
-	jz work_pending
+	testl	$_TIF_WORK_SYSCALL_EXIT, %ecx
+	jz	work_pending
 	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
-					# schedule() instead
-	movl %esp, %eax
-	call syscall_trace_leave
-	jmp resume_userspace
+	ENABLE_INTERRUPTS(CLBR_ANY)		# could let syscall_trace_leave() call
+						# schedule() instead
+	movl	%esp, %eax
+	call	syscall_trace_leave
+	jmp	resume_userspace
 END(syscall_exit_work)
 
 syscall_fault:
 	ASM_CLAC
 	GET_THREAD_INFO(%ebp)
-	movl $-EFAULT,PT_EAX(%esp)
-	jmp resume_userspace
+	movl	$-EFAULT, PT_EAX(%esp)
+	jmp	resume_userspace
 END(syscall_fault)
 
 syscall_badsys:
-	movl $-ENOSYS,%eax
-	jmp syscall_after_call
+	movl	$-ENOSYS, %eax
+	jmp	syscall_after_call
 END(syscall_badsys)
 
 sysenter_badsys:
-	movl $-ENOSYS,%eax
-	jmp sysenter_after_call
+	movl	$-ENOSYS, %eax
+	jmp	sysenter_after_call
 END(sysenter_badsys)
 
 .macro FIXUP_ESPFIX_STACK
@@ -613,24 +607,24 @@ END(sysenter_badsys)
  */
 #ifdef CONFIG_X86_ESPFIX32
 	/* fixup the stack */
-	mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
-	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+	mov	GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
+	mov	GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
 	shl $16, %eax
-	addl %esp, %eax			/* the adjusted stack pointer */
-	pushl $__KERNEL_DS
-	pushl %eax
-	lss (%esp), %esp		/* switch to the normal stack segment */
+	addl	%esp, %eax			/* the adjusted stack pointer */
+	pushl	$__KERNEL_DS
+	pushl	%eax
+	lss	(%esp), %esp			/* switch to the normal stack segment */
 #endif
 .endm
 .macro UNWIND_ESPFIX_STACK
 #ifdef CONFIG_X86_ESPFIX32
-	movl %ss, %eax
+	movl	%ss, %eax
 	/* see if on espfix stack */
-	cmpw $__ESPFIX_SS, %ax
-	jne 27f
-	movl $__KERNEL_DS, %eax
-	movl %eax, %ds
-	movl %eax, %es
+	cmpw	$__ESPFIX_SS, %ax
+	jne	27f
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
 	/* switch to normal stack */
 	FIXUP_ESPFIX_STACK
 27:
@@ -645,7 +639,7 @@ END(sysenter_badsys)
 ENTRY(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushl $(~vector+0x80)	/* Note: always in signed byte range */
+	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
     vector=vector+1
 	jmp	common_interrupt
 	.align	8
@@ -659,35 +653,34 @@ END(irq_entries_start)
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
 	ASM_CLAC
-	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
+	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL
 	TRACE_IRQS_OFF
-	movl %esp,%eax
-	call do_IRQ
-	jmp ret_from_intr
+	movl	%esp, %eax
+	call	do_IRQ
+	jmp	ret_from_intr
 ENDPROC(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	ASM_CLAC;			\
-	pushl $~(nr);		\
+	pushl	$~(nr);			\
 	SAVE_ALL;			\
 	TRACE_IRQS_OFF			\
-	movl %esp,%eax;			\
-	call fn;			\
-	jmp ret_from_intr;		\
+	movl	%esp, %eax;		\
+	call	fn;			\
+	jmp	ret_from_intr;		\
 ENDPROC(name)
 
 
 #ifdef CONFIG_TRACING
-#define TRACE_BUILD_INTERRUPT(name, nr)		\
-	BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
+# define TRACE_BUILD_INTERRUPT(name, nr)	BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
 #else
-#define TRACE_BUILD_INTERRUPT(name, nr)
+# define TRACE_BUILD_INTERRUPT(name, nr)
 #endif
 
-#define BUILD_INTERRUPT(name, nr) \
-	BUILD_INTERRUPT3(name, nr, smp_##name); \
+#define BUILD_INTERRUPT(name, nr)		\
+	BUILD_INTERRUPT3(name, nr, smp_##name);	\
 	TRACE_BUILD_INTERRUPT(name, nr)
 
 /* The include is where all of the SMP etc. interrupts come from */
@@ -695,30 +688,30 @@ ENDPROC(name)
 
 ENTRY(coprocessor_error)
 	ASM_CLAC
-	pushl $0
-	pushl $do_coprocessor_error
-	jmp error_code
+	pushl	$0
+	pushl	$do_coprocessor_error
+	jmp	error_code
 END(coprocessor_error)
 
 ENTRY(simd_coprocessor_error)
 	ASM_CLAC
-	pushl $0
+	pushl	$0
 #ifdef CONFIG_X86_INVD_BUG
 	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-	ALTERNATIVE "pushl $do_general_protection",	\
-		    "pushl $do_simd_coprocessor_error", \
+	ALTERNATIVE "pushl	$do_general_protection",	\
+		    "pushl	$do_simd_coprocessor_error",	\
 		    X86_FEATURE_XMM
 #else
-	pushl $do_simd_coprocessor_error
+	pushl	$do_simd_coprocessor_error
 #endif
-	jmp error_code
+	jmp	error_code
 END(simd_coprocessor_error)
 
 ENTRY(device_not_available)
 	ASM_CLAC
-	pushl $-1			# mark this as an int
-	pushl $do_device_not_available
-	jmp error_code
+	pushl	$-1				# mark this as an int
+	pushl	$do_device_not_available
+	jmp	error_code
 END(device_not_available)
 
 #ifdef CONFIG_PARAVIRT
@@ -735,165 +728,171 @@ END(native_irq_enable_sysexit)
 
 ENTRY(overflow)
 	ASM_CLAC
-	pushl $0
-	pushl $do_overflow
-	jmp error_code
+	pushl	$0
+	pushl	$do_overflow
+	jmp	error_code
 END(overflow)
 
 ENTRY(bounds)
 	ASM_CLAC
-	pushl $0
-	pushl $do_bounds
-	jmp error_code
+	pushl	$0
+	pushl	$do_bounds
+	jmp	error_code
 END(bounds)
 
 ENTRY(invalid_op)
 	ASM_CLAC
-	pushl $0
-	pushl $do_invalid_op
-	jmp error_code
+	pushl	$0
+	pushl	$do_invalid_op
+	jmp	error_code
 END(invalid_op)
 
 ENTRY(coprocessor_segment_overrun)
 	ASM_CLAC
-	pushl $0
-	pushl $do_coprocessor_segment_overrun
-	jmp error_code
+	pushl	$0
+	pushl	$do_coprocessor_segment_overrun
+	jmp	error_code
 END(coprocessor_segment_overrun)
 
 ENTRY(invalid_TSS)
 	ASM_CLAC
-	pushl $do_invalid_TSS
-	jmp error_code
+	pushl	$do_invalid_TSS
+	jmp	error_code
 END(invalid_TSS)
 
 ENTRY(segment_not_present)
 	ASM_CLAC
-	pushl $do_segment_not_present
-	jmp error_code
+	pushl	$do_segment_not_present
+	jmp	error_code
 END(segment_not_present)
 
 ENTRY(stack_segment)
 	ASM_CLAC
-	pushl $do_stack_segment
-	jmp error_code
+	pushl	$do_stack_segment
+	jmp	error_code
 END(stack_segment)
 
 ENTRY(alignment_check)
 	ASM_CLAC
-	pushl $do_alignment_check
-	jmp error_code
+	pushl	$do_alignment_check
+	jmp	error_code
 END(alignment_check)
 
 ENTRY(divide_error)
 	ASM_CLAC
-	pushl $0			# no error code
-	pushl $do_divide_error
-	jmp error_code
+	pushl	$0				# no error code
+	pushl	$do_divide_error
+	jmp	error_code
 END(divide_error)
 
 #ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
 	ASM_CLAC
-	pushl $0
-	pushl machine_check_vector
-	jmp error_code
+	pushl	$0
+	pushl	machine_check_vector
+	jmp	error_code
 END(machine_check)
 #endif
 
 ENTRY(spurious_interrupt_bug)
 	ASM_CLAC
-	pushl $0
-	pushl $do_spurious_interrupt_bug
-	jmp error_code
+	pushl	$0
+	pushl	$do_spurious_interrupt_bug
+	jmp	error_code
 END(spurious_interrupt_bug)
 
 #ifdef CONFIG_XEN
-/* Xen doesn't set %esp to be precisely what the normal sysenter
-   entrypoint expects, so fix it up before using the normal path. */
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
 ENTRY(xen_sysenter_target)
-	addl $5*4, %esp		/* remove xen-provided frame */
-	jmp sysenter_past_esp
+	addl	$5*4, %esp			/* remove xen-provided frame */
+	jmp	sysenter_past_esp
 
 ENTRY(xen_hypervisor_callback)
-	pushl $-1 /* orig_ax = -1 => not a system call */
+	pushl	$-1				/* orig_ax = -1 => not a system call */
 	SAVE_ALL
 	TRACE_IRQS_OFF
 
-	/* Check to see if we got the event in the critical
-	   region in xen_iret_direct, after we've reenabled
-	   events and checked for pending events.  This simulates
-	   iret instruction's behaviour where it delivers a
-	   pending interrupt when enabling interrupts. */
-	movl PT_EIP(%esp),%eax
-	cmpl $xen_iret_start_crit,%eax
-	jb   1f
-	cmpl $xen_iret_end_crit,%eax
-	jae  1f
+	/*
+	 * Check to see if we got the event in the critical
+	 * region in xen_iret_direct, after we've reenabled
+	 * events and checked for pending events.  This simulates
+	 * iret instruction's behaviour where it delivers a
+	 * pending interrupt when enabling interrupts:
+	 */
+	movl	PT_EIP(%esp), %eax
+	cmpl	$xen_iret_start_crit, %eax
+	jb	1f
+	cmpl	$xen_iret_end_crit, %eax
+	jae	1f
 
-	jmp  xen_iret_crit_fixup
+	jmp	xen_iret_crit_fixup
 
 ENTRY(xen_do_upcall)
-1:	mov %esp, %eax
-	call xen_evtchn_do_upcall
+1:	mov	%esp, %eax
+	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPT
-	call xen_maybe_preempt_hcall
+	call	xen_maybe_preempt_hcall
 #endif
-	jmp  ret_from_intr
+	jmp	ret_from_intr
 ENDPROC(xen_hypervisor_callback)
 
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-#  1. Fault while reloading DS, ES, FS or GS
-#  2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
+/*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ *  1. Fault while reloading DS, ES, FS or GS
+ *  2. Fault while executing IRET
+ * Category 1 we fix up by reattempting the load, and zeroing the segment
+ * register if the load fails.
+ * Category 2 we fix up by jumping to do_iret_error. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by maintaining a status value in EAX.
+ */
 ENTRY(xen_failsafe_callback)
-	pushl %eax
-	movl $1,%eax
-1:	mov 4(%esp),%ds
-2:	mov 8(%esp),%es
-3:	mov 12(%esp),%fs
-4:	mov 16(%esp),%gs
+	pushl	%eax
+	movl	$1, %eax
+1:	mov	4(%esp), %ds
+2:	mov	8(%esp), %es
+3:	mov	12(%esp), %fs
+4:	mov	16(%esp), %gs
 	/* EAX == 0 => Category 1 (Bad segment)
 	   EAX != 0 => Category 2 (Bad IRET) */
-	testl %eax,%eax
-	popl %eax
-	lea 16(%esp),%esp
-	jz 5f
-	jmp iret_exc
-5:	pushl $-1 /* orig_ax = -1 => not a system call */
+	testl	%eax, %eax
+	popl	%eax
+	lea	16(%esp), %esp
+	jz	5f
+	jmp	iret_exc
+5:	pushl	$-1				/* orig_ax = -1 => not a system call */
 	SAVE_ALL
-	jmp ret_from_exception
-
-.section .fixup,"ax"
-6:	xorl %eax,%eax
-	movl %eax,4(%esp)
-	jmp 1b
-7:	xorl %eax,%eax
-	movl %eax,8(%esp)
-	jmp 2b
-8:	xorl %eax,%eax
-	movl %eax,12(%esp)
-	jmp 3b
-9:	xorl %eax,%eax
-	movl %eax,16(%esp)
-	jmp 4b
+	jmp	ret_from_exception
+
+.section .fixup, "ax"
+6:	xorl	%eax, %eax
+	movl	%eax, 4(%esp)
+	jmp	1b
+7:	xorl	%eax, %eax
+	movl	%eax, 8(%esp)
+	jmp	2b
+8:	xorl	%eax, %eax
+	movl	%eax, 12(%esp)
+	jmp	3b
+9:	xorl	%eax, %eax
+	movl	%eax, 16(%esp)
+	jmp	4b
 .previous
-	_ASM_EXTABLE(1b,6b)
-	_ASM_EXTABLE(2b,7b)
-	_ASM_EXTABLE(3b,8b)
-	_ASM_EXTABLE(4b,9b)
+	_ASM_EXTABLE(1b, 6b)
+	_ASM_EXTABLE(2b, 7b)
+	_ASM_EXTABLE(3b, 8b)
+	_ASM_EXTABLE(4b, 9b)
 ENDPROC(xen_failsafe_callback)
 
 BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
 		xen_evtchn_do_upcall)
 
-#endif	/* CONFIG_XEN */
+#endif /* CONFIG_XEN */
 
 #if IS_ENABLED(CONFIG_HYPERV)
 
@@ -910,28 +909,28 @@ ENTRY(mcount)
 END(mcount)
 
 ENTRY(ftrace_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	pushl $0	/* Pass NULL as regs pointer */
-	movl 4*4(%esp), %eax
-	movl 0x4(%ebp), %edx
-	movl function_trace_op, %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	pushl	$0				/* Pass NULL as regs pointer */
+	movl	4*4(%esp), %eax
+	movl	0x4(%ebp), %edx
+	movl	function_trace_op, %ecx
+	subl	$MCOUNT_INSN_SIZE, %eax
 
 .globl ftrace_call
 ftrace_call:
-	call ftrace_stub
+	call	ftrace_stub
 
-	addl $4,%esp	/* skip NULL pointer */
-	popl %edx
-	popl %ecx
-	popl %eax
+	addl	$4, %esp			/* skip NULL pointer */
+	popl	%edx
+	popl	%ecx
+	popl	%eax
 ftrace_ret:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 .globl ftrace_graph_call
 ftrace_graph_call:
-	jmp ftrace_stub
+	jmp	ftrace_stub
 #endif
 
 .globl ftrace_stub
@@ -949,72 +948,72 @@ ENTRY(ftrace_regs_caller)
 	 * as the current return ip is. We move the return ip into the
 	 * ip location, and move flags into the return ip location.
 	 */
-	pushl 4(%esp)	/* save return ip into ip slot */
-
-	pushl $0	/* Load 0 into orig_ax */
-	pushl %gs
-	pushl %fs
-	pushl %es
-	pushl %ds
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
-
-	movl 13*4(%esp), %eax	/* Get the saved flags */
-	movl %eax, 14*4(%esp)	/* Move saved flags into regs->flags location */
-				/* clobbering return ip */
-	movl $__KERNEL_CS,13*4(%esp)
-
-	movl 12*4(%esp), %eax	/* Load ip (1st parameter) */
-	subl $MCOUNT_INSN_SIZE, %eax	/* Adjust ip */
-	movl 0x4(%ebp), %edx	/* Load parent ip (2nd parameter) */
-	movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
-	pushl %esp		/* Save pt_regs as 4th parameter */
+	pushl	4(%esp)				/* save return ip into ip slot */
+
+	pushl	$0				/* Load 0 into orig_ax */
+	pushl	%gs
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+
+	movl	13*4(%esp), %eax		/* Get the saved flags */
+	movl	%eax, 14*4(%esp)		/* Move saved flags into regs->flags location */
+						/* clobbering return ip */
+	movl	$__KERNEL_CS, 13*4(%esp)
+
+	movl	12*4(%esp), %eax		/* Load ip (1st parameter) */
+	subl	$MCOUNT_INSN_SIZE, %eax		/* Adjust ip */
+	movl	0x4(%ebp), %edx			/* Load parent ip (2nd parameter) */
+	movl	function_trace_op, %ecx		/* Save ftrace_pos in 3rd parameter */
+	pushl	%esp				/* Save pt_regs as 4th parameter */
 
 GLOBAL(ftrace_regs_call)
-	call ftrace_stub
-
-	addl $4, %esp		/* Skip pt_regs */
-	movl 14*4(%esp), %eax	/* Move flags back into cs */
-	movl %eax, 13*4(%esp)	/* Needed to keep addl from modifying flags */
-	movl 12*4(%esp), %eax	/* Get return ip from regs->ip */
-	movl %eax, 14*4(%esp)	/* Put return ip back for ret */
-
-	popl %ebx
-	popl %ecx
-	popl %edx
-	popl %esi
-	popl %edi
-	popl %ebp
-	popl %eax
-	popl %ds
-	popl %es
-	popl %fs
-	popl %gs
-	addl $8, %esp		/* Skip orig_ax and ip */
-	popf			/* Pop flags at end (no addl to corrupt flags) */
-	jmp ftrace_ret
+	call	ftrace_stub
+
+	addl	$4, %esp			/* Skip pt_regs */
+	movl	14*4(%esp), %eax		/* Move flags back into cs */
+	movl	%eax, 13*4(%esp)		/* Needed to keep addl	from modifying flags */
+	movl	12*4(%esp), %eax		/* Get return ip from regs->ip */
+	movl	%eax, 14*4(%esp)		/* Put return ip back for ret */
+
+	popl	%ebx
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	popl	%edi
+	popl	%ebp
+	popl	%eax
+	popl	%ds
+	popl	%es
+	popl	%fs
+	popl	%gs
+	addl	$8, %esp			/* Skip orig_ax and ip */
+	popf					/* Pop flags at end (no addl to corrupt flags) */
+	jmp	ftrace_ret
 
 	popf
-	jmp  ftrace_stub
+	jmp	ftrace_stub
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
 ENTRY(mcount)
-	cmpl $__PAGE_OFFSET, %esp
-	jb ftrace_stub		/* Paging not enabled yet? */
+	cmpl	$__PAGE_OFFSET, %esp
+	jb	ftrace_stub			/* Paging not enabled yet? */
 
-	cmpl $ftrace_stub, ftrace_trace_function
-	jnz trace
+	cmpl	$ftrace_stub, ftrace_trace_function
+	jnz	trace
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	cmpl $ftrace_stub, ftrace_graph_return
-	jnz ftrace_graph_caller
+	cmpl	$ftrace_stub, ftrace_graph_return
+	jnz	ftrace_graph_caller
 
-	cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
-	jnz ftrace_graph_caller
+	cmpl	$ftrace_graph_entry_stub, ftrace_graph_entry
+	jnz	ftrace_graph_caller
 #endif
 .globl ftrace_stub
 ftrace_stub:
@@ -1022,92 +1021,92 @@ ENTRY(mcount)
 
 	/* taken from glibc */
 trace:
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	movl 0x4(%ebp), %edx
-	subl $MCOUNT_INSN_SIZE, %eax
-
-	call *ftrace_trace_function
-
-	popl %edx
-	popl %ecx
-	popl %eax
-	jmp ftrace_stub
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	movl	0xc(%esp), %eax
+	movl	0x4(%ebp), %edx
+	subl	$MCOUNT_INSN_SIZE, %eax
+
+	call	*ftrace_trace_function
+
+	popl	%edx
+	popl	%ecx
+	popl	%eax
+	jmp	ftrace_stub
 END(mcount)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_TRACER */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	lea 0x4(%ebp), %edx
-	movl (%ebp), %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
-	call prepare_ftrace_return
-	popl %edx
-	popl %ecx
-	popl %eax
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	movl	0xc(%esp), %eax
+	lea	0x4(%ebp), %edx
+	movl	(%ebp), %ecx
+	subl	$MCOUNT_INSN_SIZE, %eax
+	call	prepare_ftrace_return
+	popl	%edx
+	popl	%ecx
+	popl	%eax
 	ret
 END(ftrace_graph_caller)
 
 .globl return_to_handler
 return_to_handler:
-	pushl %eax
-	pushl %edx
-	movl %ebp, %eax
-	call ftrace_return_to_handler
-	movl %eax, %ecx
-	popl %edx
-	popl %eax
-	jmp *%ecx
+	pushl	%eax
+	pushl	%edx
+	movl	%ebp, %eax
+	call	ftrace_return_to_handler
+	movl	%eax, %ecx
+	popl	%edx
+	popl	%eax
+	jmp	*%ecx
 #endif
 
 #ifdef CONFIG_TRACING
 ENTRY(trace_page_fault)
 	ASM_CLAC
-	pushl $trace_do_page_fault
-	jmp error_code
+	pushl	$trace_do_page_fault
+	jmp	error_code
 END(trace_page_fault)
 #endif
 
 ENTRY(page_fault)
 	ASM_CLAC
-	pushl $do_page_fault
+	pushl	$do_page_fault
 	ALIGN
 error_code:
 	/* the function address is in %gs's slot on the stack */
-	pushl %fs
-	pushl %es
-	pushl %ds
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
 	cld
-	movl $(__KERNEL_PERCPU), %ecx
-	movl %ecx, %fs
+	movl	$(__KERNEL_PERCPU), %ecx
+	movl	%ecx, %fs
 	UNWIND_ESPFIX_STACK
 	GS_TO_REG %ecx
-	movl PT_GS(%esp), %edi		# get the function address
-	movl PT_ORIG_EAX(%esp), %edx	# get the error code
-	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
+	movl	PT_GS(%esp), %edi		# get the function address
+	movl	PT_ORIG_EAX(%esp), %edx		# get the error code
+	movl	$-1, PT_ORIG_EAX(%esp)		# no syscall to restart
 	REG_TO_PTGS %ecx
 	SET_KERNEL_GS %ecx
-	movl $(__USER_DS), %ecx
-	movl %ecx, %ds
-	movl %ecx, %es
+	movl	$(__USER_DS), %ecx
+	movl	%ecx, %ds
+	movl	%ecx, %es
 	TRACE_IRQS_OFF
-	movl %esp,%eax			# pt_regs pointer
-	call *%edi
-	jmp ret_from_exception
+	movl	%esp, %eax			# pt_regs pointer
+	call	*%edi
+	jmp	ret_from_exception
 END(page_fault)
 
 /*
@@ -1124,28 +1123,28 @@ END(page_fault)
  * the instruction that would have done it for sysenter.
  */
 .macro FIX_STACK offset ok label
-	cmpw $__KERNEL_CS, 4(%esp)
-	jne \ok
+	cmpw	$__KERNEL_CS, 4(%esp)
+	jne	\ok
 \label:
-	movl TSS_sysenter_sp0 + \offset(%esp), %esp
+	movl	TSS_sysenter_sp0 + \offset(%esp), %esp
 	pushfl
-	pushl $__KERNEL_CS
-	pushl $sysenter_past_esp
+	pushl	$__KERNEL_CS
+	pushl	$sysenter_past_esp
 .endm
 
 ENTRY(debug)
 	ASM_CLAC
-	cmpl $entry_SYSENTER_32,(%esp)
-	jne debug_stack_correct
+	cmpl	$entry_SYSENTER_32, (%esp)
+	jne	debug_stack_correct
 	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
 debug_stack_correct:
-	pushl $-1			# mark this as an int
+	pushl	$-1				# mark this as an int
 	SAVE_ALL
 	TRACE_IRQS_OFF
-	xorl %edx,%edx			# error code 0
-	movl %esp,%eax			# pt_regs pointer
-	call do_debug
-	jmp ret_from_exception
+	xorl	%edx, %edx			# error code 0
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_debug
+	jmp	ret_from_exception
 END(debug)
 
 /*
@@ -1159,91 +1158,91 @@ END(debug)
 ENTRY(nmi)
 	ASM_CLAC
 #ifdef CONFIG_X86_ESPFIX32
-	pushl %eax
-	movl %ss, %eax
-	cmpw $__ESPFIX_SS, %ax
-	popl %eax
-	je nmi_espfix_stack
+	pushl	%eax
+	movl	%ss, %eax
+	cmpw	$__ESPFIX_SS, %ax
+	popl	%eax
+	je	nmi_espfix_stack
 #endif
-	cmpl $entry_SYSENTER_32,(%esp)
-	je nmi_stack_fixup
-	pushl %eax
-	movl %esp,%eax
-	/* Do not access memory above the end of our stack page,
+	cmpl	$entry_SYSENTER_32, (%esp)
+	je	nmi_stack_fixup
+	pushl	%eax
+	movl	%esp, %eax
+	/*
+	 * Do not access memory above the end of our stack page,
 	 * it might not exist.
 	 */
-	andl $(THREAD_SIZE-1),%eax
-	cmpl $(THREAD_SIZE-20),%eax
-	popl %eax
-	jae nmi_stack_correct
-	cmpl $entry_SYSENTER_32,12(%esp)
-	je nmi_debug_stack_check
+	andl	$(THREAD_SIZE-1), %eax
+	cmpl	$(THREAD_SIZE-20), %eax
+	popl	%eax
+	jae	nmi_stack_correct
+	cmpl	$entry_SYSENTER_32, 12(%esp)
+	je	nmi_debug_stack_check
 nmi_stack_correct:
-	pushl %eax
+	pushl	%eax
 	SAVE_ALL
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_nmi
-	jmp restore_all_notrace
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_nmi
+	jmp	restore_all_notrace
 
 nmi_stack_fixup:
 	FIX_STACK 12, nmi_stack_correct, 1
-	jmp nmi_stack_correct
+	jmp	nmi_stack_correct
 
 nmi_debug_stack_check:
-	cmpw $__KERNEL_CS,16(%esp)
-	jne nmi_stack_correct
-	cmpl $debug,(%esp)
-	jb nmi_stack_correct
-	cmpl $debug_esp_fix_insn,(%esp)
-	ja nmi_stack_correct
+	cmpw	$__KERNEL_CS, 16(%esp)
+	jne	nmi_stack_correct
+	cmpl	$debug, (%esp)
+	jb	nmi_stack_correct
+	cmpl	$debug_esp_fix_insn, (%esp)
+	ja	nmi_stack_correct
 	FIX_STACK 24, nmi_stack_correct, 1
-	jmp nmi_stack_correct
+	jmp	nmi_stack_correct
 
 #ifdef CONFIG_X86_ESPFIX32
 nmi_espfix_stack:
 	/*
 	 * create the pointer to lss back
 	 */
-	pushl %ss
-	pushl %esp
-	addl $4, (%esp)
+	pushl	%ss
+	pushl	%esp
+	addl	$4, (%esp)
 	/* copy the iret frame of 12 bytes */
 	.rept 3
-	pushl 16(%esp)
+	pushl	16(%esp)
 	.endr
-	pushl %eax
+	pushl	%eax
 	SAVE_ALL
-	FIXUP_ESPFIX_STACK		# %eax == %esp
-	xorl %edx,%edx			# zero error code
-	call do_nmi
+	FIXUP_ESPFIX_STACK			# %eax == %esp
+	xorl	%edx, %edx			# zero error code
+	call	do_nmi
 	RESTORE_REGS
-	lss 12+4(%esp), %esp		# back to espfix stack
-	jmp irq_return
+	lss	12+4(%esp), %esp		# back to espfix stack
+	jmp	irq_return
 #endif
 END(nmi)
 
 ENTRY(int3)
 	ASM_CLAC
-	pushl $-1			# mark this as an int
+	pushl	$-1				# mark this as an int
 	SAVE_ALL
 	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_int3
-	jmp ret_from_exception
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_int3
+	jmp	ret_from_exception
 END(int3)
 
 ENTRY(general_protection)
-	pushl $do_general_protection
-	jmp error_code
+	pushl	$do_general_protection
+	jmp	error_code
 END(general_protection)
 
 #ifdef CONFIG_KVM_GUEST
 ENTRY(async_page_fault)
 	ASM_CLAC
-	pushl $do_async_page_fault
-	jmp error_code
+	pushl	$do_async_page_fault
+	jmp	error_code
 END(async_page_fault)
 #endif
-
-- 
2.1.4