All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: edgar.iglesias@xilinx.com, serge.fdrv@gmail.com,
	alex.bennee@linaro.org, agraf@suse.de
Subject: [Qemu-devel] [PATCH v5 1/6] target-arm: Add CNTVOFF_EL2
Date: Tue, 16 Jun 2015 11:51:50 +1000	[thread overview]
Message-ID: <1434419515-3572-2-git-send-email-edgar.iglesias@gmail.com> (raw)
In-Reply-To: <1434419515-3572-1-git-send-email-edgar.iglesias@gmail.com>

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Adds support for the virtual timer offset controlled by EL2.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 target-arm/cpu.h    |  1 +
 target-arm/helper.c | 47 +++++++++++++++++++++++++++++++++++++++++------
 2 files changed, 42 insertions(+), 6 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 21b5b8e..1a66aa4 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -355,6 +355,7 @@ typedef struct CPUARMState {
         };
         uint64_t c14_cntfrq; /* Counter Frequency register */
         uint64_t c14_cntkctl; /* Timer Control register */
+        uint64_t cntvoff_el2; /* Counter Virtual Offset register */
         ARMGenericTimer c14_timer[NUM_GTIMERS];
         uint32_t c15_cpar; /* XScale Coprocessor Access Register */
         uint32_t c15_ticonfig; /* TI925T configuration byte.  */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 3da0c05..41cfad8 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1208,9 +1208,11 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
         /* Timer enabled: calculate and set current ISTATUS, irq, and
          * reset timer to when ISTATUS next has to change
          */
+        uint64_t offset = timeridx == GTIMER_VIRT ?
+                                      cpu->env.cp15.cntvoff_el2 : 0;
         uint64_t count = gt_get_countervalue(&cpu->env);
         /* Note that this must be unsigned 64 bit arithmetic: */
-        int istatus = count >= gt->cval;
+        int istatus = count - offset >= gt->cval;
         uint64_t nexttick;
 
         gt->ctl = deposit32(gt->ctl, 2, 1, istatus);
@@ -1221,7 +1223,7 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
             nexttick = UINT64_MAX;
         } else {
             /* Next transition is when we hit cval */
-            nexttick = gt->cval;
+            nexttick = gt->cval + offset;
         }
         /* Note that the desired next expiry time might be beyond the
          * signed-64-bit range of a QEMUTimer -- in this case we just
@@ -1253,6 +1255,11 @@ static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
     return gt_get_countervalue(env);
 }
 
+static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    return gt_get_countervalue(env) - env->cp15.cntvoff_el2;
+}
+
 static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
                           uint64_t value)
 {
@@ -1265,17 +1272,19 @@ static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     int timeridx = ri->crm & 1;
+    uint64_t offset = timeridx == GTIMER_VIRT ? env->cp15.cntvoff_el2 : 0;
 
     return (uint32_t)(env->cp15.c14_timer[timeridx].cval -
-                      gt_get_countervalue(env));
+                      (gt_get_countervalue(env) - offset));
 }
 
 static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
                           uint64_t value)
 {
     int timeridx = ri->crm & 1;
+    uint64_t offset = timeridx == GTIMER_VIRT ? env->cp15.cntvoff_el2 : 0;
 
-    env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) +
+    env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset +
                                          sextract64(value, 0, 32);
     gt_recalc_timer(arm_env_get_cpu(env), timeridx);
 }
@@ -1300,6 +1309,15 @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
     }
 }
 
+static void gt_cntvoff_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                              uint64_t value)
+{
+    ARMCPU *cpu = arm_env_get_cpu(env);
+
+    raw_write(env, ri, value);
+    gt_recalc_timer(cpu, GTIMER_VIRT);
+}
+
 void arm_gt_ptimer_cb(void *opaque)
 {
     ARMCPU *cpu = opaque;
@@ -1409,13 +1427,13 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1,
       .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO,
       .accessfn = gt_vct_access,
-      .readfn = gt_cnt_read, .resetfn = arm_cp_reset_ignore,
+      .readfn = gt_virt_cnt_read, .resetfn = arm_cp_reset_ignore,
     },
     { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2,
       .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO,
       .accessfn = gt_vct_access,
-      .readfn = gt_cnt_read, .resetfn = gt_cnt_reset,
+      .readfn = gt_virt_cnt_read, .resetfn = gt_cnt_reset,
     },
     /* Comparison value, indicating when the timer goes off */
     { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
@@ -2539,6 +2557,12 @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
     { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
       .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
       .resetvalue = 0 },
+    { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3,
+      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
+      .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
+      .resetvalue = 0 },
     REGINFO_SENTINEL
 };
 
@@ -2651,6 +2675,17 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
       .type = ARM_CP_NO_RAW, .access = PL2_W,
       .writefn = tlbi_aa64_vaa_write },
+#ifndef CONFIG_USER_ONLY
+    { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3,
+      .access = PL2_RW, .type = ARM_CP_IO, .resetvalue = 0,
+      .writefn = gt_cntvoff_write,
+      .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) },
+    { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
+      .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS | ARM_CP_IO,
+      .writefn = gt_cntvoff_write,
+      .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) },
+#endif
     REGINFO_SENTINEL
 };
 
-- 
1.9.1

  reply	other threads:[~2015-06-16  1:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-16  1:51 [Qemu-devel] [PATCH v5 0/6] arm: Steps towards EL2 support round 3 Edgar E. Iglesias
2015-06-16  1:51 ` Edgar E. Iglesias [this message]
2015-07-07 13:55   ` [Qemu-devel] [PATCH v5 1/6] target-arm: Add CNTVOFF_EL2 Peter Maydell
2015-06-16  1:51 ` [Qemu-devel] [PATCH v5 2/6] target-arm: Add CNTHCTL_EL2 Edgar E. Iglesias
2015-07-07 13:55   ` Peter Maydell
2015-06-16  1:51 ` [Qemu-devel] [PATCH v5 3/6] target-arm: Pass timeridx as argument to various timer functions Edgar E. Iglesias
2015-06-16  1:51 ` [Qemu-devel] [PATCH v5 4/6] target-arm: Add the Hypervisor timer Edgar E. Iglesias
2015-07-07 14:01   ` Peter Maydell
2015-07-10  9:58   ` Peter Maydell
2015-07-10 11:23     ` Edgar E. Iglesias
2015-07-10 11:25       ` Peter Maydell
2015-07-10 11:30         ` Edgar E. Iglesias
2015-07-13 13:12         ` Edgar E. Iglesias
2015-06-16  1:51 ` [Qemu-devel] [PATCH v5 5/6] hw/arm/virt: Replace magic IRQ constants with macros Edgar E. Iglesias
2015-06-16  1:51 ` [Qemu-devel] [PATCH v5 6/6] hw/arm/virt: Connect the Hypervisor timer Edgar E. Iglesias
2015-06-18 16:27 ` [Qemu-devel] [PATCH v5 0/6] arm: Steps towards EL2 support round 3 Peter Maydell
2015-06-18 16:59   ` Edgar E. Iglesias

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434419515-3572-2-git-send-email-edgar.iglesias@gmail.com \
    --to=edgar.iglesias@gmail.com \
    --cc=agraf@suse.de \
    --cc=alex.bennee@linaro.org \
    --cc=edgar.iglesias@xilinx.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.