[PATCHv2 bluetooth-next 2/3] at86rf230: add recommended csma backoffs settings

[Alexander Aring <alex.aring@gmail.com>]

This patch adds support for a new random csma backoffs settings when
going into sleep state. This is recommended according at86rf2xx
datasheets.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 drivers/net/ieee802154/at86rf230.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index b839bbd..7e30a45 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -945,10 +945,21 @@ static void
 at86rf230_stop(struct ieee802154_hw *hw)
 {
 	struct at86rf230_local *lp = hw->priv;
+	u8 csma_seed[2];
 
 	at86rf230_sync_state_change(hw->priv, STATE_FORCE_TRX_OFF);
 
 	disable_irq(lp->spi->irq);
+
+	/* It's recommended to set random new csma_seeds before sleep state.
+	 * Makes only sense in the stop callback, not doing this inside of
+	 * at86rf230_sleep, this is also used when we don't transmit afterwards
+	 * when calling start callback again.
+	 */
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+
 	at86rf230_sleep(lp);
 }
 
-- 
2.4.1