From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Subject: [PATCH 1/3] powerpc/iommu: Remove dma_data union
Date: Wed, 24 Jun 2015 15:25:22 +1000 [thread overview]
Message-ID: <1435123522.3996.29.camel@kernel.crashing.org> (raw)
To support "hybrid" DMA ops in a subsequent patch, we will need both
a direct DMA offset and an iommu pointer. Those are currently exclusive
(a union), so change them to be separate fields.
While there, also type iommu_table_base properly and make exist only
on CONFIG_PPC64 since it's not referenced on 32-bit at all.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/device.h | 15 +++++++++------
arch/powerpc/include/asm/dma-mapping.h | 4 ++--
arch/powerpc/include/asm/iommu.h | 31 +++++++++++++++++++++++++------
3 files changed, 36 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index e9bdda8..406c2b1 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -10,6 +10,7 @@ struct dma_map_ops;
struct device_node;
#ifdef CONFIG_PPC64
struct pci_dn;
+struct iommu_table;
#endif
/*
@@ -23,13 +24,15 @@ struct dev_archdata {
struct dma_map_ops *dma_ops;
/*
- * When an iommu is in use, dma_data is used as a ptr to the base of the
- * iommu_table. Otherwise, it is a simple numerical offset.
+ * These two used to be a union. However, with the hybrid ops we need
+ * both so here we store both a DMA offset for direct mappings and
+ * an iommu_table for remapped DMA.
*/
- union {
- dma_addr_t dma_offset;
- void *iommu_table_base;
- } dma_data;
+ dma_addr_t dma_offset;
+
+#ifdef CONFIG_PPC64
+ struct iommu_table *iommu_table_base;
+#endif
#ifdef CONFIG_IOMMU_API
void *iommu_domain;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 9103687..9cbbc9e 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -106,7 +106,7 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
static inline dma_addr_t get_dma_offset(struct device *dev)
{
if (dev)
- return dev->archdata.dma_data.dma_offset;
+ return dev->archdata.dma_offset;
return PCI_DRAM_OFFSET;
}
@@ -114,7 +114,7 @@ static inline dma_addr_t get_dma_offset(struct device *dev)
static inline void set_dma_offset(struct device *dev, dma_addr_t off)
{
if (dev)
- dev->archdata.dma_data.dma_offset = off;
+ dev->archdata.dma_offset = off;
}
/* this will be removed soon */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index ca18cff..7b87bab 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -2,17 +2,17 @@
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
* Rewrite, cleanup:
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -131,16 +131,21 @@ int get_iommu_order(unsigned long size, struct iommu_table *tbl)
struct scatterlist;
-static inline void set_iommu_table_base(struct device *dev, void *base)
+#ifdef CONFIG_PPC64
+
+static inline void set_iommu_table_base(struct device *dev,
+ struct iommu_table *base)
{
- dev->archdata.dma_data.iommu_table_base = base;
+ dev->archdata.iommu_table_base = base;
}
static inline void *get_iommu_table_base(struct device *dev)
{
- return dev->archdata.dma_data.iommu_table_base;
+ return dev->archdata.iommu_table_base;
}
+extern int dma_iommu_dma_supported(struct device *dev, u64 mask);
+
/* Frees table for an individual device node */
extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
@@ -225,6 +230,20 @@ static inline int __init tce_iommu_bus_notifier_init(void)
}
#endif /* !CONFIG_IOMMU_API */
+#else
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+ return NULL;
+}
+
+static inline int dma_iommu_dma_supported(struct device *dev, u64 mask)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems,
unsigned long mask,
next reply other threads:[~2015-06-24 5:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-24 5:25 Benjamin Herrenschmidt [this message]
2015-07-16 10:01 ` [1/3] powerpc/iommu: Remove dma_data union Michael Ellerman
-- strict thread matches above, loose matches on Subject: below --
2015-06-22 4:32 [PATCH 1/3] " Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435123522.3996.29.camel@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.