From: msalter@redhat.com (Mark Salter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM64: kernel: implement ACPI parking protocol
Date: Thu, 16 Jul 2015 12:17:11 -0400 [thread overview]
Message-ID: <1437063431.3583.2.camel@redhat.com> (raw)
In-Reply-To: <1436959990-32054-1-git-send-email-lorenzo.pieralisi@arm.com>
On Wed, 2015-07-15 at 12:33 +0100, Lorenzo Pieralisi wrote:
> The SBBR and ACPI specifications allow ACPI based systems that do not
> implement PSCI (eg systems with no EL3) to boot through the ACPI parking
> protocol specification[1].
>
> This patch implements the ACPI parking protocol CPU operations, and adds
> code that eases parsing the parking protocol data structures to the
> ARM64 SMP initializion carried out at the same time as cpus enumeration.
>
> To wake-up the CPUs from the parked state, this patch implements a
> wakeup IPI for ARM64 (ie arch_send_wakeup_ipi_mask()) that mirrors the
> ARM one, so that a specific IPI is sent for wake-up purpose in order
> to distinguish it from other IPI sources.
>
> Given the current ACPI MADT parsing API, the patch implements a glue
> layer that helps passing MADT GICC data structure from SMP initialization
Somewhat off topic, but this reminds once again, that it might be
better to generalize the ACPI_MADT_TYPE_GENERIC_INTERRUPT so that it
could be done in one pass. Currently, the SMP code and the GIC code
need boot-time info from ACPI_MADT_TYPE_GENERIC_INTERRUPT tables. This
patch adds parking protocol, and this patch:
https://lkml.org/lkml/2015/5/1/203
need to get the PMU irq from the same table. I've been thinking of
something like a single loop through the table in setup.c with
callouts to registered users of the various bits of data. Those
users could register a handler function with something like an
ACPI_MADT_GIC_DECLARE() macro which would add a handler to a
special linker section.
I could work up a separate patch if others think it a worthwhile
thing to do.
> code to the parking protocol implementation somewhat overriding the CPU
> operations interfaces. This to avoid creating a completely trasparent
^^^ transparent
> DT/ACPI CPU operations layer that would require creating opaque
> structure handling for CPUs data (DT represents CPU through DT nodes, ACPI
> through static MADT table entries), which seems overkill given that ACPI
> on ARM64 mandates only two booting protocols (PSCI and parking protocol),
> so there is no need for further protocol additions.
>
> Based on the original work by Mark Salter <msalter@redhat.com>
>
> [1] https://acpica.org/sites/acpica/files/MP%20Startup%20for%20ARM%20platforms.docx
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Hanjun Guo <hanjun.guo@linaro.org>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Mark Salter <msalter@redhat.com>
> Cc: Al Stone <ahs3@redhat.com>
> ---
> arch/arm64/Kconfig | 4 +
> arch/arm64/include/asm/acpi.h | 19 +++-
> arch/arm64/include/asm/hardirq.h | 2 +-
> arch/arm64/include/asm/smp.h | 9 ++
> arch/arm64/kernel/Makefile | 1 +
> arch/arm64/kernel/acpi_parking_protocol.c | 153 ++++++++++++++++++++++++++++++
> arch/arm64/kernel/cpu_ops.c | 27 +++++-
> arch/arm64/kernel/smp.c | 13 +++
> 8 files changed, 222 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm64/kernel/acpi_parking_protocol.c
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 318175f..b01891e 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -517,6 +517,10 @@ config HOTPLUG_CPU
> Say Y here to experiment with turning CPUs off and on. CPUs
> can be controlled through /sys/devices/system/cpu.
>
> +config ARM64_ACPI_PARKING_PROTOCOL
> + def_bool y
> + depends on ACPI && SMP
> +
> source kernel/Kconfig.preempt
>
> config UP_LATE_INIT
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index 406485e..7127db8 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -88,8 +88,25 @@ void __init acpi_init_cpus(void);
> static inline void acpi_init_cpus(void) { }
> #endif /* CONFIG_ACPI */
>
> +#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
> +bool acpi_parking_protocol_valid(int cpu);
> +void __init
> +acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor);
> +#else
> +static inline bool acpi_parking_protocol_valid(int cpu) { return false; }
> +static inline void
> +acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor)
> +{}
> +#endif
> +
> static inline const char *acpi_get_enable_method(int cpu)
> {
> - return acpi_psci_present() ? "psci" : NULL;
> + if (acpi_psci_present())
> + return "psci";
> +
> + if (acpi_parking_protocol_valid(cpu))
> + return "parking-protocol";
> +
> + return NULL;
> }
> #endif /*_ASM_ACPI_H*/
> diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
> index 6aae421..e8a3268 100644
> --- a/arch/arm64/include/asm/hardirq.h
> +++ b/arch/arm64/include/asm/hardirq.h
> @@ -20,7 +20,7 @@
> #include <linux/threads.h>
> #include <asm/irq.h>
>
> -#define NR_IPI 5
> +#define NR_IPI 6
>
> typedef struct {
> unsigned int __softirq_pending;
> diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
> index db02be8..b73ca99 100644
> --- a/arch/arm64/include/asm/smp.h
> +++ b/arch/arm64/include/asm/smp.h
> @@ -68,6 +68,15 @@ extern void secondary_entry(void);
> extern void arch_send_call_function_single_ipi(int cpu);
> extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
>
> +#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
> +extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
> +#else
> +static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
> +{
> + BUILD_BUG();
> +}
> +#endif
> +
> extern int __cpu_disable(void);
>
> extern void __cpu_die(unsigned int cpu);
> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
> index 426d076..a766566 100644
> --- a/arch/arm64/kernel/Makefile
> +++ b/arch/arm64/kernel/Makefile
> @@ -36,6 +36,7 @@ arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
> arm64-obj-$(CONFIG_PCI) += pci.o
> arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
> arm64-obj-$(CONFIG_ACPI) += acpi.o
> +arm64-obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL) += acpi_parking_protocol.o
>
> obj-y += $(arm64-obj-y) vdso/
> obj-m += $(arm64-obj-m)
> diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c
> new file mode 100644
> index 0000000..531c3ad
> --- /dev/null
> +++ b/arch/arm64/kernel/acpi_parking_protocol.c
> @@ -0,0 +1,153 @@
> +/*
> + * ARM64 ACPI Parking Protocol implementation
> + *
> + * Authors: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> + * Mark Salter <msalter@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/acpi.h>
> +#include <linux/types.h>
> +
> +#include <asm/cpu_ops.h>
> +
> +struct cpu_mailbox_entry {
> + phys_addr_t mailbox_addr;
> + u8 version;
> + u8 gic_cpu_id;
> +};
> +
> +static struct cpu_mailbox_entry cpu_mailbox_entries[NR_CPUS];
> +
> +void __init acpi_set_mailbox_entry(int cpu,
> + struct acpi_madt_generic_interrupt *p)
> +{
> + struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
> +
> + cpu_entry->mailbox_addr = p->parked_address;
> + cpu_entry->version = p->parking_version;
> + cpu_entry->gic_cpu_id = p->cpu_interface_number;
> +}
> +
> +bool __init acpi_parking_protocol_valid(int cpu)
> +{
> + struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
> +
> + return cpu_entry->mailbox_addr && cpu_entry->version;
> +}
> +
> +static int acpi_parking_protocol_cpu_init(unsigned int cpu)
> +{
> + pr_debug("%s: ACPI parked addr=%llx\n", __func__,
> + cpu_mailbox_entries[cpu].mailbox_addr);
> +
> + return 0;
> +}
> +
> +static int acpi_parking_protocol_cpu_prepare(unsigned int cpu)
> +{
> + return 0;
> +}
> +
> +struct parking_protocol_mailbox {
> + __le32 cpu_id;
> + __le32 reserved;
> + __le64 entry_point;
> +};
> +
> +static int acpi_parking_protocol_cpu_boot(unsigned int cpu)
> +{
> + struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
> + struct parking_protocol_mailbox __iomem *mailbox;
> + __le32 cpu_id;
> +
> + /*
> + * Map mailbox memory with attribute device nGnRE (ie ioremap -
> + * this deviates from the parking protocol specifications since
> + * the mailboxes are required to be mapped nGnRnE; the attribute
> + * discrepancy is harmless insofar as the protocol specification
> + * is concerned).
> + * If the mailbox is mistakenly allocated in the linear mapping
> + * by FW ioremap will fail since the mapping will be prevented
> + * by the kernel (it clashes with the linear mapping attributes
> + * specifications).
> + */
> + mailbox = ioremap(cpu_entry->mailbox_addr, sizeof(*mailbox));
> + if (!mailbox)
> + return -EIO;
> +
> + cpu_id = readl_relaxed(&mailbox->cpu_id);
> + /*
> + * Check if firmware has set-up the mailbox entry properly
> + * before kickstarting the respective cpu.
> + */
> + if (cpu_id != ~0U) {
> + iounmap(mailbox);
> + return -ENXIO;
> + }
> +
> + /*
> + * We write the entry point and cpu id as LE regardless of the
> + * native endianness of the kernel. Therefore, any boot-loaders
> + * that read this address need to convert this address to the
> + * Boot-Loader's endianness before jumping.
> + */
> + writeq_relaxed(__pa(secondary_entry), &mailbox->entry_point);
> + writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id);
> +
> + arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> +
> + iounmap(mailbox);
> +
> + return 0;
> +}
> +
> +static void acpi_parking_protocol_cpu_postboot(void)
> +{
> + int cpu = smp_processor_id();
> + struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
> + struct parking_protocol_mailbox __iomem *mailbox;
> + __le64 entry_point;
> +
> + /*
> + * Map mailbox memory with attribute device nGnRE (ie ioremap -
> + * this deviates from the parking protocol specifications since
> + * the mailboxes are required to be mapped nGnRnE; the attribute
Where is the nGnRnE requirement? I couldn't find it in the protocol doc.
Just curious.
> + * discrepancy is harmless insofar as the protocol specification
> + * is concerned).
> + * If the mailbox is mistakenly allocated in the linear mapping
> + * by FW ioremap will fail since the mapping will be prevented
> + * by the kernel (it clashes with the linear mapping attributes
> + * specifications).
The kernel will only add cached memory regions to linear mapping and
presumably, the FW will mark the mailboxes as uncached. Otherwise, it
is a FW bug. But I suppose we could run into problems with kernels
using 64K pagesize since firmware assumes 4k.
> + */
> + mailbox = ioremap(cpu_entry->mailbox_addr, sizeof(*mailbox));
> + if (!mailbox)
> + return;
> +
> + entry_point = readl_relaxed(&mailbox->entry_point);
> + /*
> + * Check if firmware has cleared the entry_point as expected
> + * by the protocol specification.
> + */
> + WARN_ON(entry_point);
> +
> + iounmap(mailbox);
> +}
> +
> +const struct cpu_operations acpi_parking_protocol_ops = {
> + .name = "parking-protocol",
> + .cpu_init = acpi_parking_protocol_cpu_init,
> + .cpu_prepare = acpi_parking_protocol_cpu_prepare,
> + .cpu_boot = acpi_parking_protocol_cpu_boot,
> + .cpu_postboot = acpi_parking_protocol_cpu_postboot
> +};
> diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
> index 5ea337d..db31991 100644
> --- a/arch/arm64/kernel/cpu_ops.c
> +++ b/arch/arm64/kernel/cpu_ops.c
> @@ -25,11 +25,12 @@
> #include <asm/smp_plat.h>
>
> extern const struct cpu_operations smp_spin_table_ops;
> +extern const struct cpu_operations acpi_parking_protocol_ops;
> extern const struct cpu_operations cpu_psci_ops;
>
> const struct cpu_operations *cpu_ops[NR_CPUS];
>
> -static const struct cpu_operations *supported_cpu_ops[] __initconst = {
> +static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = {
> #ifdef CONFIG_SMP
> &smp_spin_table_ops,
> #endif
> @@ -37,9 +38,19 @@ static const struct cpu_operations *supported_cpu_ops[] __initconst = {
> NULL,
> };
>
> +static const struct cpu_operations *acpi_supported_cpu_ops[] __initconst = {
> +#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
> + &acpi_parking_protocol_ops,
> +#endif
> + &cpu_psci_ops,
> + NULL,
> +};
> +
> static const struct cpu_operations * __init cpu_get_ops(const char *name)
> {
> - const struct cpu_operations **ops = supported_cpu_ops;
> + const struct cpu_operations **ops;
> +
> + ops = acpi_disabled ? dt_supported_cpu_ops : acpi_supported_cpu_ops;
>
> while (*ops) {
> if (!strcmp(name, (*ops)->name))
> @@ -77,8 +88,16 @@ static const char *__init cpu_read_enable_method(int cpu)
> }
> } else {
> enable_method = acpi_get_enable_method(cpu);
> - if (!enable_method)
> - pr_err("Unsupported ACPI enable-method\n");
> + if (!enable_method) {
> + /*
> + * In ACPI systems the boot CPU does not require
> + * checking the enable method since for some
> + * boot protocol (ie parking protocol) it need not
> + * be initialized. Don't warn spuriously.
> + */
> + if (cpu != 0)
> + pr_err("Unsupported ACPI enable-method\n");
> + }
> }
>
> return enable_method;
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index 50fb469..1d98f2d 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -69,6 +69,7 @@ enum ipi_msg_type {
> IPI_CPU_STOP,
> IPI_TIMER,
> IPI_IRQ_WORK,
> + IPI_WAKEUP
> };
>
> /*
> @@ -428,6 +429,8 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
> /* map the logical cpu id to cpu MPIDR */
> cpu_logical_map(cpu_count) = hwid;
>
> + acpi_set_mailbox_entry(cpu_count, processor);
> +
> cpu_count++;
> }
>
> @@ -610,6 +613,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
> S(IPI_CPU_STOP, "CPU stop interrupts"),
> S(IPI_TIMER, "Timer broadcast interrupts"),
> S(IPI_IRQ_WORK, "IRQ work interrupts"),
> + S(IPI_WAKEUP, "CPU wakeup interrupts"),
> };
>
> static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
> @@ -653,6 +657,13 @@ void arch_send_call_function_single_ipi(int cpu)
> smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
> }
>
> +#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
> +void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
> +{
> + smp_cross_call(mask, IPI_WAKEUP);
> +}
> +#endif
> +
> #ifdef CONFIG_IRQ_WORK
> void arch_irq_work_raise(void)
> {
> @@ -729,6 +740,8 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
> irq_exit();
> break;
> #endif
> + case IPI_WAKEUP:
> + break;
>
> default:
> pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr);
next prev parent reply other threads:[~2015-07-16 16:17 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-15 11:33 [PATCH] ARM64: kernel: implement ACPI parking protocol Lorenzo Pieralisi
2015-07-16 16:17 ` Mark Salter [this message]
2015-07-16 17:12 ` Lorenzo Pieralisi
2015-07-16 17:40 ` Mark Salter
2015-07-17 10:35 ` Lorenzo Pieralisi
2015-08-26 16:07 ` Lorenzo Pieralisi
2015-08-26 19:13 ` Mark Salter
2015-08-27 9:50 ` Lorenzo Pieralisi
2015-08-27 13:27 ` Mark Salter
2015-08-28 10:23 ` Lorenzo Pieralisi
2015-08-28 14:29 ` Mark Salter
2015-08-28 15:32 ` Lorenzo Pieralisi
2015-08-28 15:56 ` Mark Salter
2015-08-28 16:10 ` Lorenzo Pieralisi
2015-08-28 16:11 ` Leif Lindholm
2015-07-16 18:05 ` Al Stone
2015-07-16 18:23 ` Mark Salter
2015-07-16 21:02 ` Al Stone
2015-07-17 9:16 ` Hanjun Guo
2015-08-24 17:13 ` Lorenzo Pieralisi
2015-08-25 14:01 ` Mark Salter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437063431.3583.2.camel@redhat.com \
--to=msalter@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.