From: Lars Persson <lars.persson-VrBV9hrLPhE@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: Lars Persson <larper-VrBV9hrLPhE@public.gmane.org>
Subject: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
Date: Fri, 24 Jul 2015 07:37:16 +0200 [thread overview]
Message-ID: <1437716236-12715-1-git-send-email-larper@axis.com> (raw)
This reverts commit 232a5adc5199 ("spi: bitbang: only toggle
bitchanges") because it breaks bitbanged SPI on our MIPS system. I
found two problems with the patch:
- oldbit must initially be computed from bit position 7, 15 or 31 of
word depending on the value of bits.
- The optimization also does not eliminate consecutive ones because
the compare of 1<<31 and 1 will be false (a bool only takes values 0
or 1).
Signed-off-by: Lars Persson <larper-VrBV9hrLPhE@public.gmane.org>
---
drivers/spi/spi-bitbang-txrx.h | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 06b34e5..c616e41 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -49,17 +49,12 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
- bool oldbit = !(word & 1);
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0) {
- if ((word & (1 << 31)) != oldbit) {
- setmosi(spi, word & (1 << 31));
- oldbit = word & (1 << 31);
- }
- }
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, !cpol);
@@ -81,18 +76,13 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
- bool oldbit = !(word & (1 << 31));
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on leading edge */
setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0) {
- if ((word & (1 << 31)) != oldbit) {
- setmosi(spi, word & (1 << 31));
- oldbit = word & (1 << 31);
- }
- }
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, cpol);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-07-24 5:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 5:37 Lars Persson [this message]
[not found] ` <1437716236-12715-1-git-send-email-larper-VrBV9hrLPhE@public.gmane.org>
2015-07-24 10:44 ` [PATCH] Revert "spi: bitbang: only toggle bitchanges" Mark Brown
[not found] ` <20150724104419.GH11162-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-07-24 11:48 ` Lars Persson
[not found] ` <1437738480.31818.5.camel-VrBV9hrLPhE@public.gmane.org>
2015-07-24 11:55 ` Lars-Peter Clausen
[not found] ` <55B227B2.9080205-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2015-07-24 14:50 ` Mark Brown
2015-07-24 11:55 ` Jonas Gorski
2015-07-24 12:30 ` Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437716236-12715-1-git-send-email-larper@axis.com \
--to=lars.persson-vrbv9hrlphe@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=larper-VrBV9hrLPhE@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.